Ive been try to get this to work. Actually it work on another hobbit server. So I took the source from this server and copied to the non working one and rebuilt. STILL not working. So I tried upgrading libraries; STILL not working.
I come to the conclusion that some files are not updated correctly when
you installed to
a old installation you would like to update. I can't see it being
corrupted data.
Also another thing that works on one system and not the other is my nvc graphs don't appear in only trends.
Where you doing a fresh install? Or updating a previous install? Detlef Stracke wrote:
I have the same Problem. My operatingsystem is Solaris 10 with hobbit 4.2. The file size is 9577 Byte and "rrdtool dump <file.rrd>" says 41132902203488
<ds> <name> size </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max> <!-- PDP Status --> <last_ds> 41132902203488 </last_ds> <value> 3.8664928071e+15 </value> <unknown_sec> 0 </unknown_sec> </ds>-----Ursprüngliche Nachricht----- Von: michael nemeth [mailto:michael.nemeth at lmco.com] Gesendet: Mittwoch, 25. Juni 2008 11:47 An: hobbit at hswn.dk Betreff: Re: [hobbit] Tracking file sizes
Just TRACK? I Yes still wrong. Hubbard, Greg L wrote:
Aren't you just supposed to say "track"?
-----Original Message----- From: michael nemeth [mailto:michael.nemeth at lmco.com] Sent: Tuesday, June 24, 2008 12:28 PM To: hobbit at hswn.dk Subject: [hobbit] Tracking file sizes
First: Sol9 sparc 4.2 with latest allinone patch
in hobbit-client.cfg FILE /etc/ypfiles/passwd TRACK=passwd
in client-local.cfg file:/etc/ypfiles/passwd
size of file is 66758
But the graph show way out sizes!: cur:286723427454063.0
Search thought the archive I found someone with the same problem but they never got answer.
Any Ideas whats wrong?
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
I have a fresh OS with a new hobbit Installation.
Von: michael nemeth [mailto:michael.nemeth at lmco.com] Gesendet: Donnerstag, 3. Juli 2008 20:46 An: hobbit at hswn.dk Betreff: Re: AW: [hobbit] Tracking file sizes
Ive been try to get this to work. Actually it work on another hobbit server. So I took the source from this server and copied to the non working one and rebuilt. STILL not working. So I tried upgrading libraries; STILL not working.
I come to the conclusion that some files are not updated correctly when you installed to a old installation you would like to update. I can't see it being corrupted data.
Also another thing that works on one system and not the other is my nvc graphs don't appear in only trends.
Where you doing a fresh install? Or updating a previous install? Detlef Stracke wrote:
I have the same Problem. My operatingsystem is Solaris 10 with hobbit 4.2. The file size is 9577 Byte and "rrdtool dump <file.rrd>" says 41132902203488
<ds>
<name> size </name>
<type> GAUGE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> 41132902203488 </last_ds>
<value> 3.8664928071e+15 </value>
<unknown_sec> 0 </unknown_sec>
</ds>
-----Ursprüngliche Nachricht-----
Von: michael nemeth [mailto:michael.nemeth at lmco.com]
Gesendet: Mittwoch, 25. Juni 2008 11:47
An: hobbit at hswn.dk
Betreff: Re: [hobbit] Tracking file sizes
Just TRACK? I Yes still wrong.
Hubbard, Greg L wrote:
Aren't you just supposed to say "track"?
-----Original Message-----
From: michael nemeth [mailto:michael.nemeth at lmco.com]
Sent: Tuesday, June 24, 2008 12:28 PM
To: hobbit at hswn.dk
Subject: [hobbit] Tracking file sizes
First: Sol9 sparc 4.2 with latest allinone patch
in hobbit-client.cfg
FILE /etc/ypfiles/passwd TRACK=passwd
in client-local.cfg
file:/etc/ypfiles/passwd
size of file is 66758
But the graph show way out sizes!:
cur:286723427454063.0
Search thought the archive I found someone with the same problem but
they never got answer.
Any Ideas whats wrong?
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to
hobbit-unsubscribe at hswn.dk
Well today I comfirmed that it NOT the data. I did a clean install ; then copied over the ext and etc directory. Still didn't work. Next I'll try a clean install and just update the etc files . The only other thing I think it could be it Libraries. Im using pcre 7.5 gcc3.49 rdd -1.2.19 perl 5.8.8, libping 1.2.24 libart-2.0 on a sol 9 sparc . rddtool runs all of it expample fine too. Or patches on the OS.
Question to all . Anyone running on a Sol9 sparc system? The system it
running correctly on is a Sol 8 sparc but that is well patched.
Unfortunately thats the unclassified side and most of the systems I need
to monitor are on the classified side.
Detlef Stracke wrote:
I have a fresh OS with a new hobbit Installation.
*Von:* michael nemeth [mailto:michael.nemeth at lmco.com] *Gesendet:* Donnerstag, 3. Juli 2008 20:46 *An:* hobbit at hswn.dk *Betreff:* Re: AW: [hobbit] Tracking file sizes
Ive been try to get this to work. Actually it work on another hobbit server. So I took the source from this server and copied to the non working one and rebuilt. STILL not working. So I tried upgrading libraries; STILL not working.
I come to the conclusion that some files are not updated correctly when you installed to a old installation you would like to update. I can't see it being corrupted data.
Also another thing that works on one system and not the other is my nvc graphs don't appear in only trends.
Where you doing a fresh install? Or updating a previous install? Detlef Stracke wrote:
I have the same Problem. My operatingsystem is Solaris 10 with hobbit 4.2. The file size is 9577 Byte and "rrdtool dump <file.rrd>" says 41132902203488
<ds> <name> size </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max> <!-- PDP Status --> <last_ds> 41132902203488 </last_ds> <value> 3.8664928071e+15 </value> <unknown_sec> 0 </unknown_sec> </ds>-----Ursprüngliche Nachricht----- Von: michael nemeth [mailto:michael.nemeth at lmco.com] Gesendet: Mittwoch, 25. Juni 2008 11:47 An: hobbit at hswn.dk Betreff: Re: [hobbit] Tracking file sizes
Just TRACK? I Yes still wrong. Hubbard, Greg L wrote:
Aren't you just supposed to say "track"?
-----Original Message----- From: michael nemeth [mailto:michael.nemeth at lmco.com] Sent: Tuesday, June 24, 2008 12:28 PM To: hobbit at hswn.dk Subject: [hobbit] Tracking file sizes
First: Sol9 sparc 4.2 with latest allinone patch
in hobbit-client.cfg FILE /etc/ypfiles/passwd TRACK=passwd
in client-local.cfg file:/etc/ypfiles/passwd
size of file is 66758
But the graph show way out sizes!: cur:286723427454063.0
Search thought the archive I found someone with the same problem but they never got answer.
Any Ideas whats wrong?
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
participants (2)
-
Detlef.Stracke＠mobilcom.de
-
michael.nemeth＠lmco.com