Hi, i have xymon4.2.2 and rhel 5.2 os.i have a server and 120 clients. on some of the clients,i was getting purple status for ssh.then i removed it by using ./bb 127.0.0.1 "drop clientname ssh" on server and the purple status gone for those clients but now there is no status for ssh on display page for client.I want green status for ssh for all clients again.what should i do?Rest all thins are ok. My hostfile is like:
page rack001 <I>Yuva Compute</I>
title <I>YUVA Compute</I>
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # 172.29.1.50 mn50.mgmt.acc.in # 172.29.1.51 mn51.mgmt.acc.in # 172.29.1.52 mn52.mgmt.acc.in # 172.29.1.53 mn53.mgmt.acc.in # 172.29.1.54 mn54.mgmt.acc.in #
subpage rack901 cpu group-only cpu
0.0.0.0 mn49.mgmt.acc.in # noconn 0.0.0.0 mn50.mgmt.acc.in # noconn 0.0.0.0 mn51.mgmt.acc.in # noconn 0.0.0.0 mn52.mgmt.acc.in # noconn 0.0.0.0 mn53.mgmt.acc.in # noconn 0.0.0.0 mn54.mgmt.acc.in # noconn
subpage rack904 ssh group-only ssh
0.0.0.0 mn49.mgmt.acc.in # noconn 0.0.0.0 mn50.mgmt.acc.in # noconn 0.0.0.0 mn51.mgmt.acc.in # noconn 0.0.0.0 mn52.mgmt.acc.in # noconn 0.0.0.0 mn53.mgmt.acc.in # noconn 0.0.0.0 mn54.mgmt.acc.in # noconn ....and so on
Kindly help
Regards, pankaj
I have to ask...
You don't have anything but "noconn" listed in many of your hosts, implying you're using that because firewalling disables ping. (or swallows ICMP echoes)
Does it similarly mangle your ssh sessions?
In a standard install, simply adding "ssh" to the end of a host blick is all that's needed:
10.1.1.2 foo.bar.com # conn cpu disk msgs procs ssh
simply by adding the ssh tag on the end of my host checks, I now have an ssh column with the output I need. Is this not how you were setting this up?
--jms
From: pankaj dorlikar [mailto:pankaj.dorlikar at gmail.com] Sent: Thursday, November 19, 2009 11:22 AM To: hobbit at hswn.dk Subject: [hobbit] not getting ssh status for any host
Hi, i have xymon4.2.2 and rhel 5.2 os.i have a server and 120 clients. on some of the clients,i was getting purple status for ssh.then i removed it by using ./bb 127.0.0.1 "drop clientname ssh" on server and the purple status gone for those clients but now there is no status for ssh on display page for client.I want green status for ssh for all clients again.what should i do?Rest all thins are ok. My hostfile is like:
page rack001 <I>Yuva Compute</I>
title <I>YUVA Compute</I>
subpage rack900 <I>Row1-Rack6</I> conn
group-only conn
172.29.1.49 mn49.mgmt.acc.in #
172.29.1.50 mn50.mgmt.acc.in #
172.29.1.51 mn51.mgmt.acc.in #
172.29.1.52 mn52.mgmt.acc.in #
172.29.1.53 mn53.mgmt.acc.in #
172.29.1.54 mn54.mgmt.acc.in #
subpage rack901 cpu group-only cpu
0.0.0.0 mn49.mgmt.acc.in # noconn 0.0.0.0 mn50.mgmt.acc.in # noconn 0.0.0.0 mn51.mgmt.acc.in # noconn 0.0.0.0 mn52.mgmt.acc.in # noconn 0.0.0.0 mn53.mgmt.acc.in # noconn 0.0.0.0 mn54.mgmt.acc.in # noconn
subpage rack904 ssh group-only ssh
0.0.0.0 mn49.mgmt.acc.in # noconn 0.0.0.0 mn50.mgmt.acc.in # noconn 0.0.0.0 mn51.mgmt.acc.in # noconn 0.0.0.0 mn52.mgmt.acc.in # noconn 0.0.0.0 mn53.mgmt.acc.in # noconn 0.0.0.0 mn54.mgmt.acc.in # noconn ....and so on
Kindly help
Regards, pankaj
You have to enable the ssh test, like Jerald says. You do this on each "real" (instead of copy) entry.
So:
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # ssh 172.29.1.50 mn50.mgmt.acc.in # ssh 172.29.1.51 mn51.mgmt.acc.in # ssh 172.29.1.52 mn52.mgmt.acc.in # ssh 172.29.1.53 mn53.mgmt.acc.in # ssh 172.29.1.54 mn54.mgmt.acc.in # ssh
GLH On Thu, Nov 19, 2009 at 10:31 AM, Sheets, Jerald <Jerald.Sheets at turner.com>wrote:
I have to ask...
You don't have anything but "noconn" listed in many of your hosts, implying you're using that because firewalling disables ping. (or swallows ICMP echoes)
Does it similarly mangle your ssh sessions?
In a standard install, simply adding "ssh" to the end of a host blick is all that's needed:
10.1.1.2 foo.bar.com # conn cpu disk msgs procs ssh
simply by adding the ssh tag on the end of my host checks, I now have an ssh column with the output I need. Is this not how you were setting this up?
--jms
*From:* pankaj dorlikar [mailto:pankaj.dorlikar at gmail.com] *Sent:* Thursday, November 19, 2009 11:22 AM *To:* hobbit at hswn.dk *Subject:* [hobbit] not getting ssh status for any host
Hi, i have xymon4.2.2 and rhel 5.2 os.i have a server and 120 clients. on some of the clients,i was getting purple status for ssh.then i removed it by using ./bb 127.0.0.1 "drop clientname ssh" on server and the purple status gone for those clients but now there is no status for ssh on display page for client.I want green status for ssh for all clients again.what should i do?Rest all thins are ok. My hostfile is like:
page rack001 <I>Yuva Compute</I>
title <I>YUVA Compute</I>
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # 172.29.1.50 mn50.mgmt.acc.in # 172.29.1.51 mn51.mgmt.acc.in # 172.29.1.52 mn52.mgmt.acc.in # 172.29.1.53 mn53.mgmt.acc.in # 172.29.1.54 mn54.mgmt.acc.in #
subpage rack901 cpu group-only cpu
0.0.0.0 mn49.mgmt.acc.in # noconn 0.0.0.0 mn50.mgmt.acc.in # noconn 0.0.0.0 mn51.mgmt.acc.in # noconn 0.0.0.0 mn52.mgmt.acc.in # noconn 0.0.0.0 mn53.mgmt.acc.in # noconn 0.0.0.0 mn54.mgmt.acc.in # noconn
subpage rack904 ssh group-only ssh
0.0.0.0 mn49.mgmt.acc.in # noconn 0.0.0.0 mn50.mgmt.acc.in # noconn 0.0.0.0 mn51.mgmt.acc.in # noconn 0.0.0.0 mn52.mgmt.acc.in # noconn 0.0.0.0 mn53.mgmt.acc.in # noconn 0.0.0.0 mn54.mgmt.acc.in # noconn ....and so on
Kindly help
Regards, pankaj
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
You have to enable the ssh test, like Jerald says. You do this on each "real" (instead of copy) entry.
So:
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # ssh 172.29.1.50 mn50.mgmt.acc.in # ssh 172.29.1.51 mn51.mgmt.acc.in # ssh 172.29.1.52 mn52.mgmt.acc.in # ssh 172.29.1.53 mn53.mgmt.acc.in # ssh 172.29.1.54 mn54.mgmt.acc.in # ssh
Except the "group-only conn" will not show the ssh column. So you only need to do this for the "group-only ssh" groups.
Regards,
Malcolm
-- Technical copy-editor & proofreader
KDE Proofreading Team KDE British English Translation Team
http://l10n.kde.org/team-infos.php?teamcode=en_GB
Facebook: http://www.facebook.com/FriendlyAtheist
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02
Yes, but it makes more sense to me to define the tests on the "real" entries instead of on the copies. That is not to say that your suggestion would not work!
GLH
On Thu, Nov 19, 2009 at 11:41 AM, Malcolm Hunter <malcolm.hunter at gmx.co.uk>wrote:
You have to enable the ssh test, like Jerald says. You do this on each "real" (instead of copy) entry.
So:
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # ssh 172.29.1.50 mn50.mgmt.acc.in # ssh 172.29.1.51 mn51.mgmt.acc.in # ssh 172.29.1.52 mn52.mgmt.acc.in # ssh 172.29.1.53 mn53.mgmt.acc.in # ssh 172.29.1.54 mn54.mgmt.acc.in # ssh
Except the "group-only conn" will not show the ssh column. So you only need to do this for the "group-only ssh" groups.
Regards,
Malcolm
-- Technical copy-editor & proofreader
KDE Proofreading Team KDE British English Translation Team
http://l10n.kde.org/team-infos.php?teamcode=en_GB
Facebook: http://www.facebook.com/FriendlyAtheist
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html), i only have 3 links.After clicking on one of the links,i have other links and after clicking the 2 page link,i get list of hosts as first colmn and single test as 2nd colun . In bb-hosts,i have *conn*<http://192.168.9.104/xymon-cgi/hobbitcolumn.sh?conn>
mn49.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn49.mgmt.yuva.param&SERVICE=conn> mn50.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn50.mgmt.yuva.param&SERVICE=conn> mn51.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn51.mgmt.yuva.param&SERVICE=conn> mn52.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn52.mgmt.yuva.param&SERVICE=conn> mn53.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn53.mgmt.yuva.param&SERVICE=conn> mn54.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn54.mgmt.yuva.param&SERVICE=conn>
and for ssh i have
mn49.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn49.mgmt.yuva.param&SERVICE=ssh> mn50.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn50.mgmt.yuva.param&SERVICE=ssh> mn51.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn51.mgmt.yuva.param&SERVICE=ssh> mn52.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn52.mgmt.yuva.param&SERVICE=ssh> mn53.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn53.mgmt.yuva.param&SERVICE=ssh> mn54.mgmt.Yuma.pram- like this for every set of nodes . When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Fri, Nov 20, 2009 at 12:16 AM, Greg Hubbard <glh.forums at gmail.com> wrote:
Yes, but it makes more sense to me to define the tests on the "real" entries instead of on the copies. That is not to say that your suggestion would not work!
GLH
On Thu, Nov 19, 2009 at 11:41 AM, Malcolm Hunter <malcolm.hunter at gmx.co.uk
wrote:
You have to enable the ssh test, like Jerald says. You do this on each "real" (instead of copy) entry.
So:
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # ssh 172.29.1.50 mn50.mgmt.acc.in # ssh 172.29.1.51 mn51.mgmt.acc.in # ssh 172.29.1.52 mn52.mgmt.acc.in # ssh 172.29.1.53 mn53.mgmt.acc.in # ssh 172.29.1.54 mn54.mgmt.acc.in # ssh
Except the "group-only conn" will not show the ssh column. So you only need to do this for the "group-only ssh" groups.
Regards,
Malcolm
-- Technical copy-editor & proofreader
KDE Proofreading Team KDE British English Translation Team
http://l10n.kde.org/team-infos.php?teamcode=en_GB
Facebook: http://www.facebook.com/FriendlyAtheist
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
-- Pankaj V. Dorlikar
Could you re-post this in plain text or something?
In the translation, everything got mangled and I've got all sorts of weird colors and strange white backgrounds with illegible foregrounds.
I'd love to help you if I could, but if I can't even see the issue you're having (or read the seeming mobile-texting speak in your email) then it'll be very hard to give you answers.
--jms
On Nov 21, 2009, at 4:49 AM, pankaj dorlikar wrote:
hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html), i only have 3 links.After clicking on one of the links,i have other links and after clicking the 2 page link,i get list of hosts as first colmn and single test as 2nd colun . In bb-hosts,i have conn mn49.mgmt.Yuma.pram mn50.mgmt.Yuma.pram mn51.mgmt.Yuma.pram mn52.mgmt.Yuma.pram mn53.mgmt.Yuma.pram mn54.mgmt.Yuma.pram
and for ssh i have
mn49.mgmt.Yuma.pram mn50.mgmt.Yuma.pram mn51.mgmt.Yuma.pram mn52.mgmt.Yuma.pram mn53.mgmt.Yuma.pram mn54.mgmt.Yuma.pram - like this for every set of nodes . When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Fri, Nov 20, 2009 at 12:16 AM, Greg Hubbard <glh.forums at gmail.com> wrote: Yes, but it makes more sense to me to define the tests on the "real" entries instead of on the copies. That is not to say that your suggestion would not work!
GLH
On Thu, Nov 19, 2009 at 11:41 AM, Malcolm Hunter <malcolm.hunter at gmx.co.uk> wrote:
You have to enable the ssh test, like Jerald says. You do this on each "real" (instead of copy) entry.
So:
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # ssh 172.29.1.50 mn50.mgmt.acc.in # ssh 172.29.1.51 mn51.mgmt.acc.in # ssh 172.29.1.52 mn52.mgmt.acc.in # ssh 172.29.1.53 mn53.mgmt.acc.in # ssh 172.29.1.54 mn54.mgmt.acc.in # ssh
Except the "group-only conn" will not show the ssh column. So you only need to do this for the "group-only ssh" groups.
Regards,
Malcolm
-- Technical copy-editor & proofreader
KDE Proofreading Team KDE British English Translation Team
http://l10n.kde.org/team-infos.php?teamcode=en_GB
Facebook: http://www.facebook.com/FriendlyAtheist
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
-- Pankaj V. Dorlikar
Hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html),i have 3 links only.After clicking on one of the links,i have other links and after clicking that other page link,i get list of hosts as first colmn and single test as 2nd colun . on display page,i get, first page for conn of row1-rack1 subpage,is : http://192.168.4.60/xymon/rack001/rack1003/rack1002.html conn host1 ** host2 ** host3 ** **-indiactes green
2nd This page is : http://192.168.4.60/xymon/rack001/rack1003/rack1003.html ssh host1 * host2 * host3 * *-indiactes purple
This page is : http://192.168.4.60/xymon/rack001/rack1003/rack1005.html homemount host1 ^ host2 ^ host3 ^ ^-indiactes green
like this for every set of nodes .
When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Sat, Nov 21, 2009 at 8:49 PM, Jerald Sheets <questy at gmail.com> wrote:
Could you re-post this in plain text or something?
In the translation, everything got mangled and I've got all sorts of weird colors and strange white backgrounds with illegible foregrounds.
I'd love to help you if I could, but if I can't even see the issue you're having (or read the seeming mobile-texting speak in your email) then it'll be very hard to give you answers.
--jms
On Nov 21, 2009, at 4:49 AM, pankaj dorlikar wrote:
hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html), i only have 3 links.After clicking on one of the links,i have other links and after clicking the 2 page link,i get list of hosts as first colmn and single test as 2nd colun . In bb-hosts,i have *conn*<http://192.168.9.104/xymon-cgi/hobbitcolumn.sh?conn>
mn49.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn49.mgmt.yuva.param&SERVICE=conn> mn50.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn50.mgmt.yuva.param&SERVICE=conn> mn51.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn51.mgmt.yuva.param&SERVICE=conn> mn52.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn52.mgmt.yuva.param&SERVICE=conn> mn53.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn53.mgmt.yuva.param&SERVICE=conn> mn54.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn54.mgmt.yuva.param&SERVICE=conn>
and for ssh i have
mn49.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn49.mgmt.yuva.param&SERVICE=ssh> mn50.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn50.mgmt.yuva.param&SERVICE=ssh> mn51.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn51.mgmt.yuva.param&SERVICE=ssh> mn52.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn52.mgmt.yuva.param&SERVICE=ssh> mn53.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn53.mgmt.yuva.param&SERVICE=ssh> mn54.mgmt.Yuma.pram- like this for every set of nodes . When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Fri, Nov 20, 2009 at 12:16 AM, Greg Hubbard <glh.forums at gmail.com>wrote:
Yes, but it makes more sense to me to define the tests on the "real" entries instead of on the copies. That is not to say that your suggestion would not work!
GLH
On Thu, Nov 19, 2009 at 11:41 AM, Malcolm Hunter < malcolm.hunter at gmx.co.uk> wrote:
You have to enable the ssh test, like Jerald says. You do this on each "real" (instead of copy) entry.
So:
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # ssh 172.29.1.50 mn50.mgmt.acc.in # ssh 172.29.1.51 mn51.mgmt.acc.in # ssh 172.29.1.52 mn52.mgmt.acc.in # ssh 172.29.1.53 mn53.mgmt.acc.in # ssh 172.29.1.54 mn54.mgmt.acc.in # ssh
Except the "group-only conn" will not show the ssh column. So you only need to do this for the "group-only ssh" groups.
Regards,
Malcolm
-- Technical copy-editor & proofreader
KDE Proofreading Team KDE British English Translation Team
http://l10n.kde.org/team-infos.php?teamcode=en_GB
Facebook: http://www.facebook.com/FriendlyAtheist
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
-- Pankaj V. Dorlikar
-- Pankaj V. Dorlikar
I think your best scenario is one where you divorce yourself from the idea of placing a single host's status across multiple pages.
For instance, in an installation with a couple thousand hosts, I too would like to have a page where I could just have my conn status and subpages filled with the rest of what I'm monitoring. However, I think you're asking a little much of the system (unless Henrik wants to correct me) :)
What I've found myself doing most is grouping my hosts logically into subpages and sorting by function. Once into the subpage, then all statuses are completely viewable and available.
I will say this, though, I use the "All Non-Green" view more than anything else in Hobbit/Xymon. It is our dashboard and our lifeline throughout the day. We've caught a ton of things that other monitors have missed or fallen short on via that page.
Perhaps looking at the system a different way will give you the coverage you need.
Wish I could be of more help.
--jms
On Nov 21, 2009, at 3:29 PM, pankaj dorlikar wrote:
Hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html),i have 3 links only.After clicking on one of the links,i have other links and after clicking that other page link,i get list of hosts as first colmn and single test as 2nd colun . on display page,i get, first page for conn of row1-rack1 subpage,is : http://192.168.4.60/xymon/rack001/rack1003/rack1002.html conn host1 ** host2 ** host3 ** **-indiactes green
2nd This page is : http://192.168.4.60/xymon/rack001/rack1003/rack1003.html ssh host1 * host2 * host3 * *-indiactes purple
This page is : http://192.168.4.60/xymon/rack001/rack1003/rack1005.html homemount host1 ^ host2 ^ host3 ^ ^-indiactes green
like this for every set of nodes .
When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Sat, Nov 21, 2009 at 8:49 PM, Jerald Sheets <questy at gmail.com> wrote: Could you re-post this in plain text or something?
In the translation, everything got mangled and I've got all sorts of weird colors and strange white backgrounds with illegible foregrounds.
I'd love to help you if I could, but if I can't even see the issue you're having (or read the seeming mobile-texting speak in your email) then it'll be very hard to give you answers.
--jms
On Nov 21, 2009, at 4:49 AM, pankaj dorlikar wrote:
hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html), i only have 3 links.After clicking on one of the links,i have other links and after clicking the 2 page link,i get list of hosts as first colmn and single test as 2nd colun . In bb-hosts,i have conn mn49.mgmt.Yuma.pram mn50.mgmt.Yuma.pram mn51.mgmt.Yuma.pram mn52.mgmt.Yuma.pram mn53.mgmt.Yuma.pram mn54.mgmt.Yuma.pram
and for ssh i have
mn49.mgmt.Yuma.pram mn50.mgmt.Yuma.pram mn51.mgmt.Yuma.pram mn52.mgmt.Yuma.pram mn53.mgmt.Yuma.pram mn54.mgmt.Yuma.pram - like this for every set of nodes . When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Fri, Nov 20, 2009 at 12:16 AM, Greg Hubbard <glh.forums at gmail.com> wrote: Yes, but it makes more sense to me to define the tests on the "real" entries instead of on the copies. That is not to say that your suggestion would not work!
GLH
On Thu, Nov 19, 2009 at 11:41 AM, Malcolm Hunter <malcolm.hunter at gmx.co.uk> wrote:
You have to enable the ssh test, like Jerald says. You do this on each "real" (instead of copy) entry.
So:
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # ssh 172.29.1.50 mn50.mgmt.acc.in # ssh 172.29.1.51 mn51.mgmt.acc.in # ssh 172.29.1.52 mn52.mgmt.acc.in # ssh 172.29.1.53 mn53.mgmt.acc.in # ssh 172.29.1.54 mn54.mgmt.acc.in # ssh
Except the "group-only conn" will not show the ssh column. So you only need to do this for the "group-only ssh" groups.
Regards,
Malcolm
-- Technical copy-editor & proofreader
KDE Proofreading Team KDE British English Translation Team
http://l10n.kde.org/team-infos.php?teamcode=en_GB
Facebook: http://www.facebook.com/FriendlyAtheist
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
-- Pankaj V. Dorlikar
-- Pankaj V. Dorlikar
Thanks.But my problem is not yet solved.Please advise/help me. On Sun, Nov 22, 2009 at 11:43 AM, Jerald Sheets <questy at gmail.com> wrote:
I think your best scenario is one where you divorce yourself from the idea of placing a single host's status across multiple pages.
For instance, in an installation with a couple thousand hosts, I too would like to have a page where I could just have my conn status and subpages filled with the rest of what I'm monitoring. However, I think you're asking a little much of the system (unless Henrik wants to correct me) :)
What I've found myself doing most is grouping my hosts logically into subpages and sorting by function. Once into the subpage, then all statuses are completely viewable and available.
I will say this, though, I use the "All Non-Green" view more than anything else in Hobbit/Xymon. It is our dashboard and our lifeline throughout the day. We've caught a ton of things that other monitors have missed or fallen short on via that page.
Perhaps looking at the system a different way will give you the coverage you need.
Wish I could be of more help.
--jms
On Nov 21, 2009, at 3:29 PM, pankaj dorlikar wrote:
Hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html),i have 3 links only.After clicking on one of the links,i have other links and after clicking that other page link,i get list of hosts as first colmn and single test as 2nd colun . on display page,i get, first page for conn of row1-rack1 subpage,is : http://192.168.4.60/xymon/rack001/rack1003/rack1002.html conn host1 ** host2 ** host3 ** **-indiactes green
2nd This page is : http://192.168.4.60/xymon/rack001/rack1003/rack1003.html ssh host1 * host2 * host3 * *-indiactes purple
This page is : http://192.168.4.60/xymon/rack001/rack1003/rack1005.html homemount host1 ^ host2 ^ host3 ^ ^-indiactes green
like this for every set of nodes .
When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Sat, Nov 21, 2009 at 8:49 PM, Jerald Sheets <questy at gmail.com> wrote:
Could you re-post this in plain text or something?
In the translation, everything got mangled and I've got all sorts of weird colors and strange white backgrounds with illegible foregrounds.
I'd love to help you if I could, but if I can't even see the issue you're having (or read the seeming mobile-texting speak in your email) then it'll be very hard to give you answers.
--jms
On Nov 21, 2009, at 4:49 AM, pankaj dorlikar wrote:
hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html), i only have 3 links.After clicking on one of the links,i have other links and after clicking the 2 page link,i get list of hosts as first colmn and single test as 2nd colun . In bb-hosts,i have *conn*<http://192.168.9.104/xymon-cgi/hobbitcolumn.sh?conn>
mn49.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn49.mgmt.yuva.param&SERVICE=conn> mn50.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn50.mgmt.yuva.param&SERVICE=conn> mn51.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn51.mgmt.yuva.param&SERVICE=conn> mn52.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn52.mgmt.yuva.param&SERVICE=conn> mn53.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn53.mgmt.yuva.param&SERVICE=conn> mn54.mgmt.Yuma.pram[image: conn:green:5h49m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn54.mgmt.yuva.param&SERVICE=conn>
and for ssh i have
mn49.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn49.mgmt.yuva.param&SERVICE=ssh> mn50.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn50.mgmt.yuva.param&SERVICE=ssh> mn51.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn51.mgmt.yuva.param&SERVICE=ssh> mn52.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn52.mgmt.yuva.param&SERVICE=ssh> mn53.mgmt.Yuma.pram[image: ssh:green:5h48m]<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn53.mgmt.yuva.param&SERVICE=ssh> mn54.mgmt.Yuma.pram- like this for every set of nodes . When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Fri, Nov 20, 2009 at 12:16 AM, Greg Hubbard <glh.forums at gmail.com>wrote:
Yes, but it makes more sense to me to define the tests on the "real" entries instead of on the copies. That is not to say that your suggestion would not work!
GLH
On Thu, Nov 19, 2009 at 11:41 AM, Malcolm Hunter < malcolm.hunter at gmx.co.uk> wrote:
You have to enable the ssh test, like Jerald says. You do this on each "real" (instead of copy) entry.
So:
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in # ssh 172.29.1.50 mn50.mgmt.acc.in # ssh 172.29.1.51 mn51.mgmt.acc.in # ssh 172.29.1.52 mn52.mgmt.acc.in # ssh 172.29.1.53 mn53.mgmt.acc.in # ssh 172.29.1.54 mn54.mgmt.acc.in # ssh
Except the "group-only conn" will not show the ssh column. So you only need to do this for the "group-only ssh" groups.
Regards,
Malcolm
-- Technical copy-editor & proofreader
KDE Proofreading Team KDE British English Translation Team
http://l10n.kde.org/team-infos.php?teamcode=en_GB
Facebook: http://www.facebook.com/FriendlyAtheist
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
-- Pankaj V. Dorlikar
-- Pankaj V. Dorlikar
-- Pankaj V. Dorlikar
On Nov 22, 2009, at 1:11 PM, pankaj dorlikar wrote:
Thanks.But my problem is not yet solved.Please advise/help me.
Wish I could be of more help.
--jms
That answer above means I cannot help you. You'll need to seek that from someone else.
I gave you my suggestion, and it appears you've rejected it, therefore I have nothing to offer.
--jms
To have a host appear in multiple places is supported and easy - we do it all the time, presenting different view for different groups, some with a limited number of columns.
The error you describe can be avoided by having only ONE "real" entry for your server, and it should look like this. 1.2.3.4 server1 # ssh prefer
All other entries for this server should look like this 0.0.0.0 server1 # noconn
If you want a page with only conn (or any other subgroup of columns) look for the group-only and group-except clauses in the bb-host man pages. You should have something like this, assuming it is listed elsewhere as the "real" entry. group-only conn My Servers (Conn only) 0.0.0.0 server1 # noconn
Cheers Vernon
From: pankaj dorlikar [mailto:pankaj.dorlikar at gmail.com] Sent: Monday, 23 November 2009 2:11 AM To: hobbit at hswn.dk Subject: Re: [hobbit] not getting ssh status for any host
Thanks.But my problem is not yet solved.Please advise/help me. On Sun, Nov 22, 2009 at 11:43 AM, Jerald Sheets <questy at gmail.com<mailto:questy at gmail.com>> wrote: I think your best scenario is one where you divorce yourself from the idea of placing a single host's status across multiple pages.
For instance, in an installation with a couple thousand hosts, I too would like to have a page where I could just have my conn status and subpages filled with the rest of what I'm monitoring. However, I think you're asking a little much of the system (unless Henrik wants to correct me) :)
What I've found myself doing most is grouping my hosts logically into subpages and sorting by function. Once into the subpage, then all statuses are completely viewable and available.
I will say this, though, I use the "All Non-Green" view more than anything else in Hobbit/Xymon. It is our dashboard and our lifeline throughout the day. We've caught a ton of things that other monitors have missed or fallen short on via that page.
Perhaps looking at the system a different way will give you the coverage you need.
Wish I could be of more help.
--jms
On Nov 21, 2009, at 3:29 PM, pankaj dorlikar wrote:
Hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html),i have 3 links only.After clicking on one of the links,i have other links and after clicking that other page link,i get list of hosts as first colmn and single test as 2nd colun . on display page,i get, first page for conn of row1-rack1 subpage,is : http://192.168.4.60/xymon/rack001/rack1003/rack1002.html conn host1 ** host2 ** host3 ** **-indiactes green
2nd This page is : http://192.168.4.60/xymon/rack001/rack1003/rack1003.html ssh host1 * host2 * host3 * *-indiactes purple
This page is : http://192.168.4.60/xymon/rack001/rack1003/rack1005.html homemount host1 ^ host2 ^ host3 ^ ^-indiactes green
like this for every set of nodes .
When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Sat, Nov 21, 2009 at 8:49 PM, Jerald Sheets <questy at gmail.com<mailto:questy at gmail.com>> wrote: Could you re-post this in plain text or something?
In the translation, everything got mangled and I've got all sorts of weird colors and strange white backgrounds with illegible foregrounds.
I'd love to help you if I could, but if I can't even see the issue you're having (or read the seeming mobile-texting speak in your email) then it'll be very hard to give you answers.
--jms
On Nov 21, 2009, at 4:49 AM, pankaj dorlikar wrote:
hi, thanks for ur respoce.but i hv done such configuration for making my display page as per the requirement.In my first display page (bb.html), i only have 3 links.After clicking on one of the links,i have other links and after clicking the 2 page link,i get list of hosts as first colmn and single test as 2nd colun . In bb-hosts,i have conn<http://192.168.9.104/xymon-cgi/hobbitcolumn.sh?conn>
mn49.mgmt.Yuma.pram<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn49.mgmt.yuva.param&SERVICE=conn> mn50.mgmt.Yuma.pram<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn50.mgmt.yuva.param&SERVICE=conn> mn51.mgmt.Yuma.pram<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn51.mgmt.yuva.param&SERVICE=conn> mn52.mgmt.Yuma.pram<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn52.mgmt.yuva.param&SERVICE=conn> mn53.mgmt.Yuma.pram<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn53.mgmt.yuva.param&SERVICE=conn> mn54.mgmt.Yuma.pram<http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn54.mgmt.yuva.param&SERVICE=conn>
and for ssh i have
mn49.mgmt.Yuma.pram <http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn49.mgmt.yuva.param&SERVICE=ssh> mn50.mgmt.Yuma.pram <http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn50.mgmt.yuva.param&SERVICE=ssh> mn51.mgmt.Yuma.pram <http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn51.mgmt.yuva.param&SERVICE=ssh> mn52.mgmt.Yuma.pram <http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn52.mgmt.yuva.param&SERVICE=ssh> mn53.mgmt.Yuma.pram <http://192.168.9.104/xymon-cgi/bb-hostsvc.sh?HOST=mn53.mgmt.yuva.param&SERVICE=ssh> mn54.mgmt.Yuma.pram -
like this for every set of nodes . When i do as suggested by Malcolm Hunter, i get error of Host a.b.c.d appears twice in bb-hosts! This may cause strange results. and if i do as i given in my firsh query, i get purple ssh. kindly suggest.
On Fri, Nov 20, 2009 at 12:16 AM, Greg Hubbard <glh.forums at gmail.com<mailto:glh.forums at gmail.com>> wrote: Yes, but it makes more sense to me to define the tests on the "real" entries instead of on the copies. That is not to say that your suggestion would not work!
GLH
On Thu, Nov 19, 2009 at 11:41 AM, Malcolm Hunter <malcolm.hunter at gmx.co.uk<mailto:malcolm.hunter at gmx.co.uk>> wrote:
You have to enable the ssh test, like Jerald says. You do this on each "real" (instead of copy) entry.
So:
subpage rack900 <I>Row1-Rack6</I> conn group-only conn 172.29.1.49 mn49.mgmt.acc.in<http://mn49.mgmt.acc.in/> # ssh 172.29.1.50 mn50.mgmt.acc.in<http://mn50.mgmt.acc.in/> # ssh 172.29.1.51 mn51.mgmt.acc.in<http://mn51.mgmt.acc.in/> # ssh 172.29.1.52 mn52.mgmt.acc.in<http://mn52.mgmt.acc.in/> # ssh 172.29.1.53 mn53.mgmt.acc.in<http://mn53.mgmt.acc.in/> # ssh 172.29.1.54 mn54.mgmt.acc.in<http://mn54.mgmt.acc.in/> # ssh
Except the "group-only conn" will not show the ssh column. So you only need to do this for the "group-only ssh" groups.
Regards,
Malcolm
-- Technical copy-editor & proofreader
KDE Proofreading Team KDE British English Translation Team
http://l10n.kde.org/team-infos.php?teamcode=en_GB
Facebook: http://www.facebook.com/FriendlyAtheist
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk<mailto:hobbit-unsubscribe at hswn.dk>
-- Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.
-- Pankaj V. Dorlikar
-- Pankaj V. Dorlikar
-- Pankaj V. Dorlikar
NOTICE: This email and any attachments are confidential. They may contain legally privileged information or copyright material. You must not read, copy, use or disclose them without authorisation. If you are not an intended recipient, please contact us at once by return email and then delete both messages and all attachments.
Thank you for the info, Vernon. I was pulling my hair out on this.
--j
On Nov 22, 2009, at 8:23 PM, Everett, Vernon wrote:
...
participants (6)
-
glh.forums＠gmail.com
-
Jerald.Sheets＠turner.com
-
malcolm.hunter＠gmx.co.uk
-
pankaj.dorlikar＠gmail.com
-
questy＠gmail.com
-
Vernon.Everett＠woodside.com.au