Is it possible for me to define lines that appear in msgs to activate a red or yellow alert?
I have a bond0 interface (bonded interface consisting of eth0 and eth1) and if I unplug and plug the cat5 cable (simulating it being down) I get these messages:
Mar 10 14:48:15 hostname kernel: e100: eth1: e100_watchdog: link down Mar 10 14:48:15 hostname kernel: bonding: bond0: link status definitely down for interface eth1, disabling it Mar 10 14:48:17 hostname kernel: e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex Mar 10 14:48:17 hostname kernel: bonding: bond0: link status definitely up for interface eth1.
The /var/log/messages is definitely making it to the Hobbit Server as I can see the text on the msgs web page, but it isn't flagging them as a bad message.
Josh
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
Hi Josh,
Josh Luthman schrieb:
Is it possible for me to define lines that appear in msgs to activate a red or yellow alert?
Of course. You have to define a match-pattern and a COLOR statement in the LOG entry of your client configuration file. This is explained inside the client config file localclient.cfg, if you use client side configuration.
-- Regards,
Dirk Kastens Universitaet Osnabrueck, Rechenzentrum (Computer Center) Albrechtstr. 28, 49069 Osnabrueck, Germany Tel.: +49-541-969-2347, FAX: -2470
Is there an equal way to do the same thing on the server side?
On 3/11/08, Dirk Kastens <Dirk.Kastens at uni-osnabrueck.de> wrote:
Hi Josh,
Josh Luthman schrieb:
Is it possible for me to define lines that appear in msgs to activate a red or yellow alert?
Of course. You have to define a match-pattern and a COLOR statement in the LOG entry of your client configuration file. This is explained inside the client config file localclient.cfg, if you use client side configuration.
-- Regards,
Dirk Kastens Universitaet Osnabrueck, Rechenzentrum (Computer Center) Albrechtstr. 28, 49069 Osnabrueck, Germany Tel.: +49-541-969-2347, FAX: -2470
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
One and only bump on this =)
Is it possible to specify words or something on the server side to make the msgs test red or yellow? Dirk here gave me a solution for the client side which works, but if at all possible I'd like to configure it on the server.
Josh
On 3/11/08, Josh Luthman <josh at imaginenetworksllc.com> wrote:
Is there an equal way to do the same thing on the server side?
On 3/11/08, Dirk Kastens <Dirk.Kastens at uni-osnabrueck.de> wrote:
Hi Josh,
Josh Luthman schrieb:
Is it possible for me to define lines that appear in msgs to activate a red or yellow alert?
Of course. You have to define a match-pattern and a COLOR statement in the LOG entry of your client configuration file. This is explained inside the client config file localclient.cfg, if you use client side configuration.
-- Regards,
Dirk Kastens Universitaet Osnabrueck, Rechenzentrum (Computer Center) Albrechtstr. 28, 49069 Osnabrueck, Germany Tel.: +49-541-969-2347, FAX: -2470
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
Josh,I think Dirk meant the hobbit-clients.cfg file on the server. In my hobbit-clients.cfg file I have (for example): LOG /var/adm/messages %(?-i)WARNING COLOR=yellow IGNORE="%.*fibre-chanel.*"
which says turn yellow for a warning but ignore the given string. And this is on the server.
Is that not what you want?
Steve.
On Wed, Mar 12, 2008 at 12:08 PM, Josh Luthman <josh at imaginenetworksllc.com> wrote:
One and only bump on this =)
Is it possible to specify words or something on the server side to make the msgs test red or yellow? Dirk here gave me a solution for the client side which works, but if at all possible I'd like to configure it on the server.
Josh
On 3/11/08, Josh Luthman <josh at imaginenetworksllc.com> wrote:
Is there an equal way to do the same thing on the server side?
On 3/11/08, Dirk Kastens <Dirk.Kastens at uni-osnabrueck.de> wrote:
Hi Josh,
Josh Luthman schrieb:
Is it possible for me to define lines that appear in msgs to activate a red or yellow alert?
Of course. You have to define a match-pattern and a COLOR statement in the LOG entry of your client configuration file. This is explained inside the client config file localclient.cfg, if you use client side configuration.
-- Regards,
Dirk Kastens Universitaet Osnabrueck, Rechenzentrum (Computer Center) Albrechtstr. 28, 49069 Osnabrueck, Germany Tel.: +49-541-969-2347, FAX: -2470
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
I must have skipped over that when I did a grep -i msgs ~hobbituser/server/etc/* to brute force the answer out of the configuration. =P
I went on the server and made a line that says...
HOST=thismatchesbbhosts LOG /var/log/messages e100_watchdog COLOR=red TEXT="bond interface watch"
On the hobbit server, on the msgs test page, I have this text...
Mar 12 12:55:19 neon kernel: e100: eth0: e100_watchdog: link down Mar 12 12:55:19 neon kernel: bonding: bond0: link status definitely down for interface eth0, disabling it Mar 12 12:55:19 neon kernel: bonding: bond0: making interface eth1 the new active one. Mar 12 12:55:23 neon kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex Mar 12 12:55:23 neon kernel: bonding: bond0: link status definitely up for interface eth0. Mar 12 12:55:26 neon kernel: e100: eth1: e100_watchdog: link down Mar 12 12:55:26 neon kernel: bonding: bond0: link status definitely down for interface eth1, disabling it Mar 12 12:55:26 neon kernel: bonding: bond0: making interface eth0 the new active one. Mar 12 12:55:28 neon kernel: e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex Mar 12 12:55:28 neon kernel: bonding: bond0: link status definitely up for interface eth1.
But it still says green. Any idea where my mistake is?
Thanks for the help Steve!
On 3/12/08, Steve Holmes <sholmes42 at mac.com> wrote:
Josh,I think Dirk meant the hobbit-clients.cfg file on the server. In my hobbit-clients.cfg file I have (for example): LOG /var/adm/messages %(?-i)WARNING COLOR=yellow IGNORE="%.*fibre-chanel.*"
which says turn yellow for a warning but ignore the given string. And this is on the server.
Is that not what you want?
Steve.
On Wed, Mar 12, 2008 at 12:08 PM, Josh Luthman < josh at imaginenetworksllc.com> wrote:
One and only bump on this =)
Is it possible to specify words or something on the server side to make the msgs test red or yellow? Dirk here gave me a solution for the client side which works, but if at all possible I'd like to configure it on the server.
Josh
On 3/11/08, Josh Luthman <josh at imaginenetworksllc.com> wrote:
Is there an equal way to do the same thing on the server side?
On 3/11/08, Dirk Kastens <Dirk.Kastens at uni-osnabrueck.de> wrote:
Hi Josh,
Josh Luthman schrieb:
Is it possible for me to define lines that appear in msgs to activate a red or yellow alert?
Of course. You have to define a match-pattern and a COLOR statement in the LOG entry of your client configuration file. This is explained inside the client config file localclient.cfg, if you use client side configuration.
-- Regards,
Dirk Kastens Universitaet Osnabrueck, Rechenzentrum (Computer Center) Albrechtstr. 28, 49069 Osnabrueck, Germany Tel.: +49-541-969-2347, FAX: -2470
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
It looks ok to me, but since your match string isn't a regexp, you really don't need the "TEXT=" part. Even though the comments in the config file says you can have it, I've never used it. In fact, I'm not sure what good it does since the full message is displayed without it, even with a regexp for the match string. Also a caveat: many of us have noticed that the pattern matching for the log files is buggy. At least in 4.2.0. Some IGNORE patterns don't ignore. I don't remember noticing any match strings not matching, though.
Steve.
On Wed, Mar 12, 2008 at 1:08 PM, Josh Luthman <josh at imaginenetworksllc.com> wrote:
I must have skipped over that when I did a grep -i msgs ~hobbituser/server/etc/* to brute force the answer out of the configuration. =P
I went on the server and made a line that says...
HOST=thismatchesbbhosts LOG /var/log/messages e100_watchdog COLOR=red TEXT="bond interface watch"
On the hobbit server, on the msgs test page, I have this text...
Mar 12 12:55:19 neon kernel: e100: eth0: e100_watchdog: link down
Mar 12 12:55:19 neon kernel: bonding: bond0: link status definitely down for interface eth0, disabling it Mar 12 12:55:19 neon kernel: bonding: bond0: making interface eth1 the new active one. Mar 12 12:55:23 neon kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Mar 12 12:55:23 neon kernel: bonding: bond0: link status definitely up for interface eth0. Mar 12 12:55:26 neon kernel: e100: eth1: e100_watchdog: link down Mar 12 12:55:26 neon kernel: bonding: bond0: link status definitely down for interface eth1, disabling it
Mar 12 12:55:26 neon kernel: bonding: bond0: making interface eth0 the new active one. Mar 12 12:55:28 neon kernel: e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex Mar 12 12:55:28 neon kernel: bonding: bond0: link status definitely up for interface eth1.
But it still says green. Any idea where my mistake is?
Thanks for the help Steve!
On 3/12/08, Steve Holmes <sholmes42 at mac.com> wrote:
Josh,I think Dirk meant the hobbit-clients.cfg file on the server. In my hobbit-clients.cfg file I have (for example): LOG /var/adm/messages %(?-i)WARNING COLOR=yellow IGNORE="%.*fibre-chanel.*"
which says turn yellow for a warning but ignore the given string. And this is on the server.
Is that not what you want?
Steve.
On Wed, Mar 12, 2008 at 12:08 PM, Josh Luthman < josh at imaginenetworksllc.com> wrote:
One and only bump on this =)
Is it possible to specify words or something on the server side to make the msgs test red or yellow? Dirk here gave me a solution for the client side which works, but if at all possible I'd like to configure it on the server.
Josh
On 3/11/08, Josh Luthman <josh at imaginenetworksllc.com> wrote:
Is there an equal way to do the same thing on the server side?
On 3/11/08, Dirk Kastens <Dirk.Kastens at uni-osnabrueck.de> wrote:
Hi Josh,
Josh Luthman schrieb:
Is it possible for me to define lines that appear in msgs to activate a red or yellow alert?
Of course. You have to define a match-pattern and a COLOR statement in the LOG entry of your client configuration file. This is explained inside the client config file localclient.cfg, if you use client side configuration.
-- Regards,
Dirk Kastens Universitaet Osnabrueck, Rechenzentrum (Computer Center) Albrechtstr. 28, 49069 Osnabrueck, Germany Tel.: +49-541-969-2347, FAX: -2470
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- There is no greater gift to an insecure leader that quite matches a vague enemy who can be used to whip up fear and hatred among the population. -Paul Rusesabagina, humanitarian (b. 1954)
Human beings are perhaps never more frightening than when they are convinced beyond doubt that they are right. -Laurens van der Post, explorer and writer (1906-1996)
I just tried it with the line you saw above in the localclient.cfg on the client - no success.
I just dropped the TEXT= argument on both the hobbit-clients.cfg on the server and the localclient.cfg on the client. Give it some time to update and I'll let you know the results =)
On 3/12/08, Steve Holmes <sholmes42 at mac.com> wrote:
It looks ok to me, but since your match string isn't a regexp, you really don't need the "TEXT=" part. Even though the comments in the config file says you can have it, I've never used it. In fact, I'm not sure what good it does since the full message is displayed without it, even with a regexp for the match string. Also a caveat: many of us have noticed that the pattern matching for the log files is buggy. At least in 4.2.0. Some IGNORE patterns don't ignore. I don't remember noticing any match strings not matching, though.
Steve.
On Wed, Mar 12, 2008 at 1:08 PM, Josh Luthman <josh at imaginenetworksllc.com> wrote:
I must have skipped over that when I did a grep -i msgs ~hobbituser/server/etc/* to brute force the answer out of the configuration. =P
I went on the server and made a line that says...
HOST=thismatchesbbhosts LOG /var/log/messages e100_watchdog COLOR=red TEXT="bond interface watch"
On the hobbit server, on the msgs test page, I have this text...
Mar 12 12:55:19 neon kernel: e100: eth0: e100_watchdog: link down
Mar 12 12:55:19 neon kernel: bonding: bond0: link status definitely down for interface eth0, disabling it Mar 12 12:55:19 neon kernel: bonding: bond0: making interface eth1 the new active one. Mar 12 12:55:23 neon kernel: e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
Mar 12 12:55:23 neon kernel: bonding: bond0: link status definitely up for interface eth0. Mar 12 12:55:26 neon kernel: e100: eth1: e100_watchdog: link down Mar 12 12:55:26 neon kernel: bonding: bond0: link status definitely down for interface eth1, disabling it
Mar 12 12:55:26 neon kernel: bonding: bond0: making interface eth0 the new active one. Mar 12 12:55:28 neon kernel: e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex Mar 12 12:55:28 neon kernel: bonding: bond0: link status definitely up for interface eth1.
But it still says green. Any idea where my mistake is?
Thanks for the help Steve!
On 3/12/08, Steve Holmes <sholmes42 at mac.com> wrote:
Josh,I think Dirk meant the hobbit-clients.cfg file on the server. In my hobbit-clients.cfg file I have (for example): LOG /var/adm/messages %(?-i)WARNING COLOR=yellow IGNORE="%.*fibre-chanel.*"
which says turn yellow for a warning but ignore the given string. And this is on the server.
Is that not what you want?
Steve.
On Wed, Mar 12, 2008 at 12:08 PM, Josh Luthman < josh at imaginenetworksllc.com> wrote:
One and only bump on this =)
Is it possible to specify words or something on the server side to make the msgs test red or yellow? Dirk here gave me a solution for the client side which works, but if at all possible I'd like to configure it on the server.
Josh
On 3/11/08, Josh Luthman <josh at imaginenetworksllc.com> wrote:
Is there an equal way to do the same thing on the server side?
On 3/11/08, Dirk Kastens <Dirk.Kastens at uni-osnabrueck.de> wrote:
Hi Josh,
Josh Luthman schrieb: > Is it possible for me to define lines that appear in msgs to activate a > red or yellow alert?
Of course. You have to define a match-pattern and a COLOR statement in the LOG entry of your client configuration file. This is explained inside the client config file localclient.cfg, if you use client side configuration.
-- Regards,
Dirk Kastens Universitaet Osnabrueck, Rechenzentrum (Computer Center) Albrechtstr. 28, 49069 Osnabrueck, Germany Tel.: +49-541-969-2347, FAX: -2470
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
-- There is no greater gift to an insecure leader that quite matches a vague enemy who can be used to whip up fear and hatred among the population. -Paul Rusesabagina, humanitarian (b. 1954)
Human beings are perhaps never more frightening than when they are convinced beyond doubt that they are right. -Laurens van der Post, explorer and writer (1906-1996)
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
participants (3)
-
Dirk.Kastens＠uni-osnabrueck.de
-
josh＠imaginenetworksllc.com
-
sholmes42＠mac.com