xymon 4.3.10 not working for HP-UX 11.31 !
Hi there!
I have still no Luck with the xymon v 4.3.10 to function on my systems that is: HP-UX hpivm006 B.11.31 U ia64 1185740114 unlimited-user license ia64 hp server Integrity Virtual Machine
The folloving logfiles only contain rows of: " Peer not up, flushing message queue"
alert.log clientdata.log history.log hostdata.log rrd-data.log rrd-status.log
the xymonlaunch.log looks OK: 2012-08-29 13:53:59 Loading tasklist configuration from /opt/xymon/server/etc/tasks.cfg 2012-08-29 13:53:59 Loading hostnames 2012-08-29 13:53:59 Loading saved state 2012-08-29 13:53:59 Setting up network listener on 0.0.0.0:1984 2012-08-29 13:53:59 Setting up signal handlers 2012-08-29 13:53:59 Setting up xymond channels 2012-08-29 13:53:59 Setting up logfiles
I now have a dev server for test (a clone of the prod server) Here I have installed both the current running version 4.3.7 and the 4.3.10 I've compiled them both OK. I installed the 4.3.7 version and all started and functioned OK. Then I installed the 4.3.10 and this is not functioning at all. I get no messages from the test clients and eventually the system goes purple on all but the conn, info and trend columns. (even for the server itself) Apparently the "xymond_channel" processes starts to eat CPU and after a while I had to stop the system to prevent it
From using to much CPU (since I have a virtual environment and there was prod servers that was affected)
Anybody have a clue of what is wrong or anybody has succeded to run the xymopn 4.3.10 on hp-ux ??
Best Regards, /Tomas Andersson
Unix System Admin/Tech/Dev SCA IT Services
Tel. +46 31 7460313 Mob. +46 703 610313
This message may contain confidential, proprietary or legally privileged information and is intended for the addressee's use only. Any usage, disclosure, distribution, print or copying of any part of this message is prohibited unless you are the intended recipient. If you receive this message in error, please delete it from any computer and notify the sender. If you suspect that this message may have been altered, please notify the sender. SCA has taken every reasonable precaution to ensure that this e-mail and any attachments to this e-mail has been scanned for viruses. However, SCA does not accept liability for any damage caused by software viruses brought to you by this mail.
On 30-08-2012 10:50, Andersson Tomas wrote:
Hi there!
I have still no Luck with the xymon v 4.3.10 to function on my systems that is: HP-UX hpivm006 B.11.31 U ia64 1185740114 unlimited-user license ia64 hp server Integrity Virtual Machine
The folloving logfiles only contain rows of: " Peer not up, flushing message queue"
alert.log clientdata.log history.log hostdata.log rrd-data.log rrd-status.log
The only reason I can think of is that the various xymond_* modules won't run for some reason.
See if you can run them by hand. You can disable all of the xymond_channel+xymond_* tasks in tasks.cfg to avoid the system spinning out of control, then start Xymon. You should only have xymonlaunch and xymond running (xymonnet and the client will also run, once every 5 minutes).
Then - as the user xymond runs as! - run "xymoncmd xymond_channel --channel=status cat". This should result in all incoming status-messages being dumped on your screen. If that works, then try "xymoncmd xymond_channel --channel=client xymond_client --debug" - this should start the client data handler, so you should start getting status updates from your clients (cpu, disk, memory etc).
Regards, Henrik
Hi Henrik !
Thanks for reply ! I tried what you suggested but it didn't work I did not get anything but the following:
xymon at hpivm010:/opt/xymon # xymoncmd xymond_channel --channel=status cat 2012-08-30 12:45:10 Using default environment file /opt/xymon/server/etc/xymonserver.cfg 2012-08-30 12:45:43 Peer not up, flushing message queue 2012-08-30 12:46:38 Peer not up, flushing message queue 2012-08-30 12:48:37 Peer not up, flushing message queue 2012-08-30 12:48:37 Peer not up, flushing message queue 2012-08-30 12:48:37 Peer not up, flushing message queue 2012-08-30 12:48:37 Peer not up, flushing message queue
If you look at the top command then you see the process xymond_channel is consuming huge amount of cpu:
System: hpivm010 Thu Aug 30 12:54:02 2012 Load averages: 0.31, 0.39, 1.03 179 processes: 123 sleeping, 56 running Cpu states: CPU LOAD USER NICE SYS IDLE BLOCK SWAIT INTR SSYS 0 0.53 63.4% 0.0% 36.6% 0.0% 0.0% 0.0% 0.0% 0.0% 1 0.08 0.0% 0.0% 0.0% 100.0% 0.0% 0.0% 0.0% 0.0%
avg 0.31 32.0% 0.0% 18.0% 50.0% 0.0% 0.0% 0.0% 0.0%
System Page Size: 4Kbytes Memory: 376932K (187064K) real, 830024K (428180K) virtual, 3418312K free Page# 1/4
CPU TTY PID USERNAME PRI NI SIZE RES STATE TIME %WCPU %CPU COMMAND 0 pts/0 26422 xymon 223 20 15376K 588K run 0:15 65.76 48.71 xymond_channel 1 ? 2153 root 168 20 15568K 1120K sleep 12:30 0.36 0.36 utild 1 ? 25829 root 154 20 24352K 2008K sleep 0:00 0.06 0.06 sshd: 0 ? 920 root 127 20 12976K 844K sleep 0:46 0.04 0.04 netfmt 0 ? 77 root 152 20 216K 192K run 3:01 0.04 0.04 pm_schedcpu 1 ? 63 root -32 20 72K 64K sleep 0:18 0.03 0.03 progressdaemon 0 ? 75 root 152 20 2160K 1920K run 1:35 0.03 0.03 vxfsd 0 ? 1493 root 154 20 11116K 1168K sleep 2:40 0.02 0.02 sendmail: 0 ? 1565 root 154 20 6876K 668K sleep 0:51 0.02 0.02 ipv6agt 0 ? 25578 xymon 154 20 42192K 1084K sleep 0:00 0.01 0.01 xymond 0 ? 0 root 127 20 72K 64K sleep 0:25 0.00 0.00 swapper 0 ? 1 root 152 20 2480K 656K run 0:00 0.00 0.00 init 1 ? 2 root 128 20 72K 64K sleep 0:03 0.00 0.00 vhand 1 ? 3 root 152 20 72K 64K sleep 0:28 0.00 0.00 statdaemon
This is what you get when doing a tusc of the process
semop(24592, 0x7fffd5a8, 1) .................................................................................. ERR#11 EAGAIN sigprocmask(SIG_BLOCK, 0x7fffd500, 0x7fffd520) ............................................................... = 0 sigprocmask(SIG_SETMASK, 0x7fffd540, 0x7fffd560) ............................................................. = 0 sigprocmask(SIG_BLOCK, 0x7fffd4f0, 0x7fffd510) ............................................................... = 0 sigprocmask(SIG_SETMASK, 0x7fffd530, 0x7fffd550) ............................................................. = 0 semop(24592, 0x7fffd5a8, 1) .................................................................................. ERR#11 EAGAIN sigprocmask(SIG_BLOCK, 0x7fffd500, 0x7fffd520) ............................................................... = 0 sigprocmask(SIG_SETMASK, 0x7fffd540, 0x7fffd560) ............................................................. = 0 sigprocmask(SIG_BLOCK, 0x7fffd4f0, 0x7fffd510) ............................................................... = 0 sigprocmask(SIG_SETMASK, 0x7fffd530, 0x7fffd550) ............................................................. = 0 semop(24592, 0x7fffd5a8, 1) .................................................................................. ERR#11 EAGAIN sigprocmask(SIG_BLOCK, 0x7fffd500, 0x7fffd520) ............................................................... = 0 sigprocmask(SIG_SETMASK, 0x7fffd540, 0x7fffd560) ............................................................. = 0 sigprocmask(SIG_BLOCK, 0x7fffd4f0, 0x7fffd510) ............................................................... = 0 sigprocmask(SIG_SETMASK, 0x7fffd530, 0x7fffd550) ............................................................. = 0 semop(24592, 0x7fffd5a8, 1) .................................................................................. ERR#11 EAGAIN sigprocmask(SIG_BLOCK, 0x7fffd500, 0x7fffd520) ............................................................... = 0 sigprocmask(SIG_SETMASK, 0x7fffd540, 0x7fffd560) ............................................................. = 0 sigprocmask(SIG_BLOCK, 0x7fffd4f0, 0x7fffd510) ............................................................... = 0 sigprocmask(SIG_SETMASK, 0x7fffd530, 0x7fffd550) ............................................................. = 0 semop(24592, 0x7fffd5a8, 1) .................................................................................. ERR#11 EAGAIN
seems like the process is hanging ...
any ideas ?
Best Regards, /Tomas Andersson
Unix System Admin/Tech/Dev SCA IT Services
Tel. +46 31 7460313 Mob. +46 703 610313
-----Original Message----- From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Henrik Størner Sent: den 30 augusti 2012 11:16 To: xymon at xymon.com Subject: Re: [Xymon] xymon 4.3.10 not working for HP-UX 11.31 !
On 30-08-2012 10:50, Andersson Tomas wrote:
Hi there!
I have still no Luck with the xymon v 4.3.10 to function on my systems that is: HP-UX hpivm006 B.11.31 U ia64 1185740114 unlimited-user license ia64 hp server Integrity Virtual Machine
The folloving logfiles only contain rows of: " Peer not up, flushing message queue"
alert.log clientdata.log history.log hostdata.log rrd-data.log rrd-status.log
The only reason I can think of is that the various xymond_* modules won't run for some reason.
See if you can run them by hand. You can disable all of the xymond_channel+xymond_* tasks in tasks.cfg to avoid the system spinning out of control, then start Xymon. You should only have xymonlaunch and xymond running (xymonnet and the client will also run, once every 5 minutes).
Then - as the user xymond runs as! - run "xymoncmd xymond_channel --channel=status cat". This should result in all incoming status-messages being dumped on your screen. If that works, then try "xymoncmd xymond_channel --channel=client xymond_client --debug" - this should start the client data handler, so you should start getting status updates from your clients (cpu, disk, memory etc).
Regards, Henrik
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
This message may contain confidential, proprietary or legally privileged information and is intended for the addressee's use only. Any usage, disclosure, distribution, print or copying of any part of this message is prohibited unless you are the intended recipient. If you receive this message in error, please delete it from any computer and notify the sender. If you suspect that this message may have been altered, please notify the sender. SCA has taken every reasonable precaution to ensure that this e-mail and any attachments to this e-mail has been scanned for viruses. However, SCA does not accept liability for any damage caused by software viruses brought to you by this mail.
On 30-08-2012 11:15, Henrik Størner wrote:
On 30-08-2012 10:50, Andersson Tomas wrote:
Hi there!
I have still no Luck with the xymon v 4.3.10 to function on my systems that is: HP-UX hpivm006 B.11.31 U ia64 1185740114 unlimited-user license ia64 hp server Integrity Virtual Machine
The only reason I can think of is that the various xymond_* modules won't run for some reason.
Tomas did some tests for me, and so far we haven't been able to determine what the cause of this is. I may get access to an HP/UX server next week and will try to figure it out.
As a work-around, the xymond_channel program from 4.3.7 appears to work fine.
Regards, Henrik
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
On 08/31/2012 08:05 AM, Henrik Størner wrote:
On 30-08-2012 11:15, Henrik Størner wrote:
On 30-08-2012 10:50, Andersson Tomas wrote:
Hi there!
I have still no Luck with the xymon v 4.3.10 to function on my systems that is: HP-UX hpivm006 B.11.31 U ia64 1185740114 unlimited-user license ia64 hp server Integrity Virtual Machine
The only reason I can think of is that the various xymond_* modules won't run for some reason.
Tomas did some tests for me, and so far we haven't been able to determine what the cause of this is. I may get access to an HP/UX server next week and will try to figure it out.
As a work-around, the xymond_channel program from 4.3.7 appears to work fine.
I've probably got one I can use for testing if it is required (though we never got past 11.11 if memory serves -- don't know if it's a free upgrade or not).
- ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |novosirj at umdnj.edu - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAlBAxP0ACgkQmb+gadEcsb4C8ACg3/Duc0UWBXh0QlaJ1L/9JTUX oywAoMyY5TYEsYq4jyJVBj9buyuy0kkV =gW3z -----END PGP SIGNATURE-----
participants (3)
-
henrik＠hswn.dk
-
novosirj＠umdnj.edu
-
tomas.andersson＠sca.com