I have been running two Xymon- 4.3.0-0.beta2 running on RedHat AS 5.2 servers for over three months and hive not seen anything like you describe on either server.

 .......Bruce 

Bruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/

Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.

From: ZHONGYU CHEN [mailto:w17682 at motorola.com] Sent: Wednesday, February 03, 2010 7:41 AM To: hobbit at hswn.dk Subject: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

Hi,

I switch to version 4.2.3 and I haven't see the same issue.

Thanks.

On Sun, Jan 24, 2010 at 10:45 PM, ZHONGYU CHEN <w17682 at motorola.com> wrote:

Hi,

I installed and configured xymon-4.3.0-beta2. Everything looks fine. But there is one strange thing beyond my understood. The rrd history chart disappears under tests/columns of conn, disk and memory after running 24 hours. But I can see these charts under column trends. No time effect to the tests/columns of cpu and my custom tests. These rrd charts will stay there as far as time goes.

If I add a new client, I can see these rrd charts under conn, disk and memory during the first 24 hours (or the first day).

Anyone sees the same phenomenon? Did I miss something in configuration?

Thank you in advance.

-- Zhongyu Chen

Hi Thomas,

Good day!

I am having the same issue, but the problem is that it is my Xymon server that is installed on CentOS that is displaying 'day' instead of 'days' when executing uptime command.

So all my clients' graph are not displaying after the time that you specified on your email.

Can you help me on how to solve this problem?

Thanks in advance.

Best regards,

Ryan

From: Brand, Thomas R. [mailto:TRBrand at cvs.com] Sent: Thursday, February 04, 2010 1:55 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

I had similar symptoms a while back running Xymon on SLES 10.1 (SuSE Linux).

The rrd graphs would display data for hours 0-24 after a reboot, no data for hours 24-48,

and then be fine again for hours 48+.

I determined that, when running under SLES, the uptime command returns the string:

'day' for uptime >= 24 hours && <48 hours; eg, 1 day

'days' for uptime >= 48 hours; eg 3 days

On the Xymon server, it appears the software is only looking for the string 'days'.

I modified the [uptime] section in ~hobbit/client/bin/hobbitclient-linux.sh and added a perl

command to change ' day ' to ' days '.

echo "[uptime]"

uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

Tom Brand

Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.

From: White, Bruce [mailto:bewhite at fellowes.com] Sent: Wednesday, February 03, 2010 11:42 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

I have been running two Xymon- 4.3.0-0.beta2 running on RedHat AS 5.2 servers for over three months and hive not seen anything like you describe on either server.

 .......Bruce 

Bruce White

Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>

Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.

From: ZHONGYU CHEN [mailto:w17682 at motorola.com] Sent: Wednesday, February 03, 2010 7:41 AM To: hobbit at hswn.dk Subject: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

Hi,

I switch to version 4.2.3 and I haven't see the same issue.

Thanks.

On Sun, Jan 24, 2010 at 10:45 PM, ZHONGYU CHEN <w17682 at motorola.com> wrote:

Hi,

I installed and configured xymon-4.3.0-beta2. Everything looks fine. But there is one strange thing beyond my understood. The rrd history chart disappears under tests/columns of conn, disk and memory after running 24 hours. But I can see these charts under column trends. No time effect to the tests/columns of cpu and my custom tests. These rrd charts will stay there as far as time goes.

If I add a new client, I can see these rrd charts under conn, disk and memory during the first 24 hours (or the first day).

Anyone sees the same phenomenon? Did I miss something in configuration?

Thank you in advance.

-- Zhongyu Chen

Ryan,

I don't have a CentOS system to test on.

I would expect CentOS to use the hobbitclient-linux.sh script too, so the fix described below should work for you too.

On the client, edit hobbitclient-linux.sh and change:

echo "[uptime]"

uptime

To

echo "[uptime]"

uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

Tom Brand

Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.

From: Lapuz, Ryan Jay [mailto:ryanjay.lapuz at tsdp.toshiba.co.jp] Sent: Wednesday, July 14, 2010 9:31 PM To: xymon at xymon.com Subject: [xymon] RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

Hi Thomas,

Good day!

I am having the same issue, but the problem is that it is my Xymon server that is installed on CentOS that is displaying 'day' instead of 'days' when executing uptime command.

So all my clients' graph are not displaying after the time that you specified on your email.

Can you help me on how to solve this problem?

Thanks in advance.

Best regards,

Ryan

From: Brand, Thomas R. [mailto:TRBrand at cvs.com] Sent: Thursday, February 04, 2010 1:55 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

I had similar symptoms a while back running Xymon on SLES 10.1 (SuSE Linux).

The rrd graphs would display data for hours 0-24 after a reboot, no data for hours 24-48,

and then be fine again for hours 48+.

I determined that, when running under SLES, the uptime command returns the string:

'day' for uptime >= 24 hours && <48 hours; eg, 1 day

'days' for uptime >= 48 hours; eg 3 days

On the Xymon server, it appears the software is only looking for the string 'days'.

I modified the [uptime] section in ~hobbit/client/bin/hobbitclient-linux.sh and added a perl

command to change ' day ' to ' days '.

echo "[uptime]"

uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

Tom Brand

Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.

From: White, Bruce [mailto:bewhite at fellowes.com] Sent: Wednesday, February 03, 2010 11:42 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

I have been running two Xymon- 4.3.0-0.beta2 running on RedHat AS 5.2 servers for over three months and hive not seen anything like you describe on either server.

 .......Bruce 

Bruce White

Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>

Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.

From: ZHONGYU CHEN [mailto:w17682 at motorola.com] Sent: Wednesday, February 03, 2010 7:41 AM To: hobbit at hswn.dk Subject: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

Hi,

I switch to version 4.2.3 and I haven't see the same issue.

Thanks.

On Sun, Jan 24, 2010 at 10:45 PM, ZHONGYU CHEN <w17682 at motorola.com> wrote:

Hi,

I installed and configured xymon-4.3.0-beta2. Everything looks fine. But there is one strange thing beyond my understood. The rrd history chart disappears under tests/columns of conn, disk and memory after running 24 hours. But I can see these charts under column trends. No time effect to the tests/columns of cpu and my custom tests. These rrd charts will stay there as far as time goes.

If I add a new client, I can see these rrd charts under conn, disk and memory during the first 24 hours (or the first day).

Anyone sees the same phenomenon? Did I miss something in configuration?

Thank you in advance.

-- Zhongyu Chen

Hi Josh,

I did modify hobbitclient-linux.sh as you instructed but I think there's no change as I tried it manually.

[xymon at xymon ~]$ cat /etc/redhat-release

CentOS release 5.4 (Final)

[xymon at xymon ~]$

[xymon at xymon ~]$ uptime

10:40:28 up 1 day, 41 min, 4 users, load average: 0.02, 0.04, 0.00

[xymon at xymon ~]$

[xymon at xymon ~]$ uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

10:40:42 up 1 day, 41 min, 4 users, load average: 0.01, 0.04, 0.00

[xymon at xymon ~]$

[xymon at xymon ~]$ echo uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

10:40:53 up 1 day, 41 min, 4 users, load average: 0.01, 0.04, 0.00

Thanks and regards,

Ryan

From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, July 16, 2010 12:50 AM To: xymon at xymon.com Cc: Lapuz, Ryan Jay Subject: Re: [xymon] RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

[root at bender ~]# cat /etc/redhat-release CentOS release 5.2 (Final) [root at bender ~]# uptime 12:48:33 up 39 days, 22:20, 3 users, load average: 0.00, 0.07, 0.13 [root at bender ~]# uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/" 12:48:37 up 39 days, 22:20, 3 users, load average: 0.00, 0.07, 0.13 [root at bender ~]# echo uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/" 12:49:10 up 39 days, 22:20, 3 users, load average: 0.00, 0.06, 0.12

Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373

On Thu, Jul 15, 2010 at 12:44 PM, Brand, Thomas R. <TRBrand at cvs.com> wrote:

Ryan,

I don't have a CentOS system to test on.

I would expect CentOS to use the hobbitclient-linux.sh script too, so the fix described below should work for you too.

On the client, edit hobbitclient-linux.sh and change:

echo "[uptime]"

uptime

To

echo "[uptime]"

uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

Tom Brand

Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.

From: Lapuz, Ryan Jay [mailto:ryanjay.lapuz at tsdp.toshiba.co.jp] Sent: Wednesday, July 14, 2010 9:31 PM To: xymon at xymon.com Subject: [xymon] RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

Hi Thomas,

Good day!

I am having the same issue, but the problem is that it is my Xymon server that is installed on CentOS that is displaying 'day' instead of 'days' when executing uptime command.

So all my clients' graph are not displaying after the time that you specified on your email.

Can you help me on how to solve this problem?

Thanks in advance.

Best regards,

Ryan

From: Brand, Thomas R. [mailto:TRBrand at cvs.com] Sent: Thursday, February 04, 2010 1:55 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

I had similar symptoms a while back running Xymon on SLES 10.1 (SuSE Linux).

The rrd graphs would display data for hours 0-24 after a reboot, no data for hours 24-48,

and then be fine again for hours 48+.

I determined that, when running under SLES, the uptime command returns the string:

'day' for uptime >= 24 hours && <48 hours; eg, 1 day

'days' for uptime >= 48 hours; eg 3 days

On the Xymon server, it appears the software is only looking for the string 'days'.

I modified the [uptime] section in ~hobbit/client/bin/hobbitclient-linux.sh and added a perl

command to change ' day ' to ' days '.

echo "[uptime]"

uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"

Tom Brand

Disclaimer: 1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded.

From: White, Bruce [mailto:bewhite at fellowes.com] Sent: Wednesday, February 03, 2010 11:42 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

I have been running two Xymon- 4.3.0-0.beta2 running on RedHat AS 5.2 servers for over three months and hive not seen anything like you describe on either server.

 .......Bruce 

Bruce White

Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>

Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.

From: ZHONGYU CHEN [mailto:w17682 at motorola.com] Sent: Wednesday, February 03, 2010 7:41 AM To: hobbit at hswn.dk Subject: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours

Hi,

I switch to version 4.2.3 and I haven't see the same issue.

Thanks.

On Sun, Jan 24, 2010 at 10:45 PM, ZHONGYU CHEN <w17682 at motorola.com> wrote:

Hi,

I installed and configured xymon-4.3.0-beta2. Everything looks fine. But there is one strange thing beyond my understood. The rrd history chart disappears under tests/columns of conn, disk and memory after running 24 hours. But I can see these charts under column trends. No time effect to the tests/columns of cpu and my custom tests. These rrd charts will stay there as far as time goes.

If I add a new client, I can see these rrd charts under conn, disk and memory during the first 24 hours (or the first day).

Anyone sees the same phenomenon? Did I miss something in configuration?

Thank you in advance.

-- Zhongyu Chen

Is anyone else getting Tom's e-mails over and over and over? I probably am more sensitive to this as I see my name on the first line and think it is important. :) -- Sent from my Palm Pre On Jul 24, 2010 6:49, Brand, Thomas R. <TRBrand at cvs.com> wrote: Ryan,    Your ‘uptime’ command is returning ‘ day, ’ ß note the comma ‘,’ after the ‘y’   Change statement to: uptime | perl -pe "s/^(.*) day, (.*)/\1 days \2/" or uptime | perl -pe "s/^(.*) day[, ](.*)/\1 days \2/"     Note: ‘ day ‘ à ‘ day, ‘   # echo '10:40:28 up 1 day, 41 min,  4 users,  load average: 0.02, 0.04, 0.00'| perl -pe "s/^(.*) day, (.*)/\1 days \2/" 10:40:28 up 1 days 41 min,  4 users,  load average: 0.02, 0.04, 0.00     Tom Brand Disclaimer:  1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded. From: Lapuz, Ryan Jay [mailto:ryanjay.lapuz at tsdp.toshiba.co.jp] Sent: Tuesday, July 20, 2010 10:45 PM To: xymon at xymon.com Subject: RE: [xymon] RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours   Hi Josh,   I did modify hobbitclient-linux.sh as you instructed but I think there’s no change as I tried it manually.   [xymon at xymon ~]$ cat /etc/redhat-release CentOS release 5.4 (Final) [xymon at xymon ~]$ [xymon at xymon ~]$ uptime 10:40:28 up 1 day, 41 min,  4 users,  load average: 0.02, 0.04, 0.00 [xymon at xymon ~]$ [xymon at xymon ~]$ uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/" 10:40:42 up 1 day, 41 min,  4 users,  load average: 0.01, 0.04, 0.00 [xymon at xymon ~]$ [xymon at xymon ~]$ echo `uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"` 10:40:53 up 1 day, 41 min, 4 users, load average: 0.01, 0.04, 0.00   Thanks and regards, Ryan   From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, July 16, 2010 12:50 AM To: xymon at xymon.com Cc: Lapuz, Ryan Jay Subject: Re: [xymon] RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours   [root at bender ~]# cat /etc/redhat-release CentOS release 5.2 (Final) [root at bender ~]# uptime  12:48:33 up 39 days, 22:20,  3 users,  load average: 0.00, 0.07, 0.13 [root at bender ~]# uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"  12:48:37 up 39 days, 22:20,  3 users,  load average: 0.00, 0.07, 0.13 [root at bender ~]# echo `uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"` 12:49:10 up 39 days, 22:20, 3 users, load average: 0.00, 0.06, 0.12 Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Thu, Jul 15, 2010 at 12:44 PM, Brand, Thomas R. <TRBrand at cvs.com> wrote: Ryan,    I don’t have a CentOS system to test on.    I would expect CentOS to use the  hobbitclient-linux.sh script too, so the fix described below should work for you too.   On the client, edit hobbitclient-linux.sh and change: echo "[uptime]" uptime   To   echo "[uptime]" uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"         Tom Brand Disclaimer:  1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded. From: Lapuz, Ryan Jay [mailto:ryanjay.lapuz at tsdp.toshiba.co.jp] Sent: Wednesday, July 14, 2010 9:31 PM To: xymon at xymon.com Subject: [xymon] RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours   Hi Thomas, Good day! I am having the same issue, but the problem is that it is my Xymon server that is installed on CentOS that is displaying ‘day’ instead of ‘days’ when executing uptime command. So all my clients’ graph are not displaying after the time that you specified on your email. Can you help me on how to solve this problem? Thanks in advance. Best regards, Ryan   From: Brand, Thomas R. [mailto:TRBrand at cvs.com] Sent: Thursday, February 04, 2010 1:55 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours   I had similar symptoms a while back running Xymon on SLES 10.1 (SuSE Linux). The rrd graphs would display data for hours 0-24 after a reboot, no data for hours 24-48, and then be fine again for hours 48+.     I determined that, when running under SLES, the uptime command returns the string: ‘day’   for uptime >= 24 hours && <48 hours; eg, 1 day ‘days’ for uptime >= 48 hours; eg 3 days   On the Xymon server, it appears the software is only looking for the string ‘days’.   I modified the [uptime] section in ~hobbit/client/bin/hobbitclient-linux.sh and added a perl command to change ‘ day ‘ to  ‘ days ‘.   echo "[uptime]" uptime | perl -pe "s/^(.*) day (.*)/\1 days \2/"       Tom Brand Disclaimer:  1) all opinions are my own, 2) I may be completely wrong, 3) my advice is worth at least as much as what you are paying for it, or your money cheerfully refunded. From: White, Bruce [mailto:bewhite at fellowes.com] Sent: Wednesday, February 03, 2010 11:42 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours   I have been running two Xymon- 4.3.0-0.beta2 running on  RedHat AS 5.2 servers for over three months and hive not seen anything like you describe on either server.        …….Bruce      Bruce White  Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com       Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.   From: ZHONGYU CHEN [mailto:w17682 at motorola.com] Sent: Wednesday, February 03, 2010 7:41 AM To: hobbit at hswn.dk Subject: [hobbit] Re: rrd history chart disappears under conn, memory and disk after 24 hours   Hi, I switch to version 4.2.3 and I haven't see the same issue. Thanks. On Sun, Jan 24, 2010 at 10:45 PM, ZHONGYU CHEN <w17682 at motorola.com> wrote: Hi, I installed and configured xymon-4.3.0-beta2. Everything looks fine. But there is one strange thing beyond my understood. The rrd history chart disappears under tests/columns of conn, disk and memory after running 24 hours. But I can see these charts under column trends. No time effect to the tests/columns of cpu and my custom tests. These rrd charts will stay there as far as time goes. If I add a new client, I can see these rrd charts under conn, disk and memory during the first 24 hours (or the first day). Anyone sees the same phenomenon?  Did I miss something in configuration? Thank you in advance. -- Zhongyu Chen    

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1

I got two e-mails 30 times each! Anyone else in this boat with me?

On 07/24/2010 11:32 AM, Josh Luthman wrote:

I got two emails one time each.

...

On Jul 24, 2010 11:12 AM, "Ryan Novosielski" <novosirj at umdnj.edu <mailto:novosirj at umdnj.edu>> wrote:

Is anyone else getting Tom's e-mails over and over and over? I probably am more sensitive to this as I see my name on the first line and think it is important. :)

-- Sent from my Palm Pre

---

On Jul 24, 2010 6:49, Brand, Thomas R. <TRBrand at cvs.com <mailto:TRBrand at cvs.com>> wrote:

Ryan,

Your ‘uptime’ command ...

To unsubscribe from the xymon list, send an e-mail to xymon-unsubscribe at xymon.com <mailto:xymon-unsubscribe at xymon.com>

• ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |novosirj at umdnj.edu - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAkxMeY8ACgkQmb+gadEcsb4G7QCgh7EpnTDeGtD15pDA2ArVpMW7 BOMAnAqguq+yeNEcsHWWSaKWr7QuuweU =c2qQ -----END PGP SIGNATURE-----