On Tue, December 1, 2015 2:42 am, Michael Resnick wrote:
Using just rclient latest on rhel 6.6 xymon server with latest rpm - Xymon 4.3.24-1.el6.terabithia the only columns I am getting are clientlog conn info trends
why aren't I seeing the rest of the columns ?
Any help appreciated.
Hi,
I'm not incredibly familiar with rclient logistics, but it sounds like the issue might stem from xymond_client either not running or not knowing to process the incoming client message being received for the server.
Are you receiving all the columns (disk, cpu, memory, etc...) for the xymon server *itself* and not getting them for a separate server you're trying to check with rclient? Or does nothing listed have a set of columns at all?
-jc
xymon server itself is fine. All the other servers are tests with conn only, with just 2 havingxymon client and 6 running rclient. none of the servers have a full set of columns except the xymon server.rclient log shows successfully completed 6 servers and the clientlog looks good. I may try rolling back to 4.3.21 or earlier. The last I used at my previous job was 4.3.11 It is a pain to install , since I have no Internet access in this environment.
From: J.C. Cleaver <cleaver at terabithia.org>To: Michael Resnick <sys1002 at yahoo.com> Cc: Xymon Mailing List <xymon at xymon.com> Sent: Tuesday, December 1, 2015 5:31 PM Subject: Re: issues with new install
On Tue, December 1, 2015 2:42 am, Michael Resnick wrote:
Using just rclient latest on rhel 6.6 xymon server with latest rpm - Xymon 4.3.24-1.el6.terabithia the only columns I am getting are clientlog conn info trends
why aren't I seeing the rest of the columns ?
Any help appreciated.
Hi,
I'm not incredibly familiar with rclient logistics, but it sounds like the issue might stem from xymond_client either not running or not knowing to process the incoming client message being received for the server.
Are you receiving all the columns (disk, cpu, memory, etc...) for the xymon server *itself* and not getting them for a separate server you're trying to check with rclient? Or does nothing listed have a set of columns at all?
-jc
On Tue, December 1, 2015 8:04 am, Michael Resnick wrote:
xymon server itself is fine. All the other servers are tests with conn only, with just 2 havingxymon client and 6 running rclient. none of the servers have a full set of columns except the xymon server.rclient log shows successfully completed 6 servers and the clientlog looks good. I may try rolling back to 4.3.21 or earlier. The last I used at my previous job was 4.3.11 It is a pain to install , since I have no Internet access in this environment.
Can you edit tasks.cfg to run "xymond_client" (in the [clientdata] section) in --debug mode and see if you see data for these clients?
Also, can you confirm that the non-xymonserver client (the "non-rclient" one) is working OK and you're getting status messages for?
It seems like either a well-formed client message isn't making its way in in the first place, or xymond_client isn't properly processing it back into xymond. Either way, we should be able to see some evidence (or not) in the xymond_client logs as the clientlog injections occur.
HTH, -jc
Thanks. I have done more investigating. in the hostdata folder on the xymon server shows up, all the servers show "No such host" in the Info column, so it look like the hosts are not being created in hostdata. What is the trigger that creates the data ? Weird problem. I have been using xymon for years and have never seen this, but usually I build from the tar.Thanks for any help.
From: J.C. Cleaver <cleaver at terabithia.org>To: Michael Resnick <sys1002 at yahoo.com> Cc: Xymon Mailing List <xymon at xymon.com> Sent: Tuesday, December 1, 2015 11:00 PM Subject: Re: issues with new install
On Tue, December 1, 2015 8:04 am, Michael Resnick wrote:
xymon server itself is fine. All the other servers are tests with conn only, with just 2 havingxymon client and 6 running rclient. none of the servers have a full set of columns except the xymon server.rclient log shows successfully completed 6 servers and the clientlog looks good. I may try rolling back to 4.3.21 or earlier. The last I used at my previous job was 4.3.11 It is a pain to install , since I have no Internet access in this environment.
Can you edit tasks.cfg to run "xymond_client" (in the [clientdata] section) in --debug mode and see if you see data for these clients?
Also, can you confirm that the non-xymonserver client (the "non-rclient" one) is working OK and you're getting status messages for?
It seems like either a well-formed client message isn't making its way in in the first place, or xymond_client isn't properly processing it back into xymond. Either way, we should be able to see some evidence (or not) in the xymond_client logs as the clientlog injections occur.
HTH,
-jc
participants (2)
-
cleaver＠terabithia.org
-
sys1002＠yahoo.com