graphs that use multiple RRD files as input
I figured this out.
First in cgioptions.cfg I had to add CGI_SVC_OPTS="... --multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas" Initially I added just my custom "DBAreas" but that broke the others. The html.c code says if mulitgraphs is blank then put "disk...if_load" as defaults but if it isn't blank then those don't get loaded so we have to basically add them back.
Adding the mods to cgioptions.cfg worked to a degree. It was graphing the first 4 of my rrds onto one graph but it was only creating the one graph.
To fix that problem I had to add <!-- linecount=44-->" Into the message/text that is sent Like this INFO=$INFO\n" <!-- linecount=40 -->" status $MACHINE.$TEST $COLOR $INFO
Steve
From: Steve Brown Sent: Wednesday, November 26, 2014 11:10 PM To: xymon at xymon.com Subject: graphs that use multiple RRD files as input
I have a graph setup on a custom test that is using multiple RRD files as input. The graph is working but it is combining all the RRDs into a single graph instead of splitting them up like the built in "disk" graphs.
Is there a parameter missing in my graphs.cfg definition or some other place I need to modify in order to have Xymon automatically split the graph up into multiple graphs?
Thanks Steve
[DBAreas] FNPATTERN DBAreas,(.*).rrd TITLE Area Size YAXIS KB DEF:kba at RRDIDX@=@RRDFN@:kbarea:AVERAGE LINE3:kba at RRDIDX@#@COLOR@:Area at RRDPARAM@ GPRINT:kba at RRDIDX@:LAST: \: %5.1lf (cur) GPRINT:kba at RRDIDX@:MAX: \: %5.1lf (max) GPRINT:kba at RRDIDX@:MIN: \: %5.1lf (min) GPRINT:kba at RRDIDX@:AVERAGE: \: %5.1lf (avg)\n
Disk splits into more than 1 graph
Hi Steve
Not sure if it's what you are looking for, but check the GRAPHS= in xymonserver.cfg If you have a value, let's call it my_test, it will determine the order in which they will appear on the trends column. But you can also define the number of data sets (lines) per graph, by adding ::X after the entry, where X is number of data sets. Not sure if it works for the primary test display though.
Regards Vernon
On 28 November 2014 at 04:49, Steve Brown <sgb at pics.com> wrote:
I figured this out.
First in cgioptions.cfg I had to add
CGI_SVC_OPTS=”… --multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"
Initially I added just my custom “DBAreas” but that broke the others. The html.c code says if mulitgraphs is blank then put “disk…if_load” as defaults but if it isn’t blank then those don’t get loaded so we have to basically add them back.
Adding the mods to cgioptions.cfg worked to a degree. It was graphing the first 4 of my rrds onto one graph but it was only creating the one graph.
To fix that problem I had to add
<!-- linecount=44-->"
Into the message/text that is sent
Like this
INFO=$INFO\n” <!-- linecount=40 -->”
status $MACHINE.$TEST $COLOR $INFO
Steve
*From:* Steve Brown *Sent:* Wednesday, November 26, 2014 11:10 PM *To:* xymon at xymon.com *Subject:* graphs that use multiple RRD files as input
I have a graph setup on a custom test that is using multiple RRD files as input. The graph is working but it is combining all the RRDs into a single graph instead of splitting them up like the built in “disk” graphs.
Is there a parameter missing in my graphs.cfg definition or some other place I need to modify in order to have Xymon automatically split the graph up into multiple graphs?
Thanks
Steve
[DBAreas]
FNPATTERN DBAreas,(.*).rrd TITLE Area Size YAXIS KB DEF:kba at RRDIDX@=@RRDFN@:kbarea:AVERAGE LINE3:kba at RRDIDX@#@COLOR@:Area at RRDPARAM@ GPRINT:kba at RRDIDX@:LAST: \: %5.1lf (cur) GPRINT:kba at RRDIDX@:MAX: \: %5.1lf (max) GPRINT:kba at RRDIDX@:MIN: \: %5.1lf (min) GPRINT:kba at RRDIDX@:AVERAGE: \: %5.1lf (avg)\nDisk splits into more than 1 graph
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
-- "Accept the challenges so that you can feel the exhilaration of victory"
- General George Patton
This is cool. Is it documented anywhere?
On 28 November 2014 at 18:00, Vernon Everett <everett.vernon at gmail.com> wrote:
Hi Steve
Not sure if it's what you are looking for, but check the GRAPHS= in xymonserver.cfg If you have a value, let's call it my_test, it will determine the order in which they will appear on the trends column. But you can also define the number of data sets (lines) per graph, by adding ::X after the entry, where X is number of data sets. Not sure if it works for the primary test display though.
Regards Vernon
On 28 November 2014 at 04:49, Steve Brown <sgb at pics.com> wrote:
I figured this out.
First in cgioptions.cfg I had to add
CGI_SVC_OPTS=”… --multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"
Initially I added just my custom “DBAreas” but that broke the others. The html.c code says if mulitgraphs is blank then put “disk…if_load” as defaults but if it isn’t blank then those don’t get loaded so we have to basically add them back.
Adding the mods to cgioptions.cfg worked to a degree. It was graphing the first 4 of my rrds onto one graph but it was only creating the one graph.
To fix that problem I had to add
<!-- linecount=44-->"
Into the message/text that is sent
Like this
INFO=$INFO\n” <!-- linecount=40 -->”
status $MACHINE.$TEST $COLOR $INFO
Steve
*From:* Steve Brown *Sent:* Wednesday, November 26, 2014 11:10 PM *To:* xymon at xymon.com *Subject:* graphs that use multiple RRD files as input
I have a graph setup on a custom test that is using multiple RRD files as input. The graph is working but it is combining all the RRDs into a single graph instead of splitting them up like the built in “disk” graphs.
Is there a parameter missing in my graphs.cfg definition or some other place I need to modify in order to have Xymon automatically split the graph up into multiple graphs?
Thanks
Steve
[DBAreas]
FNPATTERN DBAreas,(.*).rrd TITLE Area Size YAXIS KB DEF:kba at RRDIDX@=@RRDFN@:kbarea:AVERAGE LINE3:kba at RRDIDX@#@COLOR@:Area at RRDPARAM@ GPRINT:kba at RRDIDX@:LAST: \: %5.1lf (cur) GPRINT:kba at RRDIDX@:MAX: \: %5.1lf (max) GPRINT:kba at RRDIDX@:MIN: \: %5.1lf (min) GPRINT:kba at RRDIDX@:AVERAGE: \: %5.1lf (avg)\nDisk splits into more than 1 graph
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
-- "Accept the challenges so that you can feel the exhilaration of victory"
- General George Patton
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Hi
No idea. I can't recall if I read it, or figured it out while playing around with variables to see what they do.
Regards Vernon
On 1 December 2014 at 09:59, Jeremy Laidman <jlaidman at rebel-it.com.au> wrote:
This is cool. Is it documented anywhere?
On 28 November 2014 at 18:00, Vernon Everett <everett.vernon at gmail.com> wrote:
Hi Steve
Not sure if it's what you are looking for, but check the GRAPHS= in xymonserver.cfg If you have a value, let's call it my_test, it will determine the order in which they will appear on the trends column. But you can also define the number of data sets (lines) per graph, by adding ::X after the entry, where X is number of data sets. Not sure if it works for the primary test display though.
Regards Vernon
On 28 November 2014 at 04:49, Steve Brown <sgb at pics.com> wrote:
I figured this out.
First in cgioptions.cfg I had to add
CGI_SVC_OPTS=”… --multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"
Initially I added just my custom “DBAreas” but that broke the others. The html.c code says if mulitgraphs is blank then put “disk…if_load” as defaults but if it isn’t blank then those don’t get loaded so we have to basically add them back.
Adding the mods to cgioptions.cfg worked to a degree. It was graphing the first 4 of my rrds onto one graph but it was only creating the one graph.
To fix that problem I had to add
<!-- linecount=44-->"
Into the message/text that is sent
Like this
INFO=$INFO\n” <!-- linecount=40 -->”
status $MACHINE.$TEST $COLOR $INFO
Steve
*From:* Steve Brown *Sent:* Wednesday, November 26, 2014 11:10 PM *To:* xymon at xymon.com *Subject:* graphs that use multiple RRD files as input
I have a graph setup on a custom test that is using multiple RRD files as input. The graph is working but it is combining all the RRDs into a single graph instead of splitting them up like the built in “disk” graphs.
Is there a parameter missing in my graphs.cfg definition or some other place I need to modify in order to have Xymon automatically split the graph up into multiple graphs?
Thanks
Steve
[DBAreas]
FNPATTERN DBAreas,(.*).rrd TITLE Area Size YAXIS KB DEF:kba at RRDIDX@=@RRDFN@:kbarea:AVERAGE LINE3:kba at RRDIDX@#@COLOR@:Area at RRDPARAM@ GPRINT:kba at RRDIDX@:LAST: \: %5.1lf (cur) GPRINT:kba at RRDIDX@:MAX: \: %5.1lf (max) GPRINT:kba at RRDIDX@:MIN: \: %5.1lf (min) GPRINT:kba at RRDIDX@:AVERAGE: \: %5.1lf (avg)\nDisk splits into more than 1 graph
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
-- "Accept the challenges so that you can feel the exhilaration of victory"
- General George Patton
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
-- "Accept the challenges so that you can feel the exhilaration of victory"
- General George Patton
participants (3)
-
everett.vernon＠gmail.com
-
jlaidman＠rebel-it.com.au
-
sgb＠pics.com