[EXCH Prio5]R: [EXCH Prio5]Re: linux client disk warning levels
For those wishing to switch, here's my notes on uninstalling BBWin, since I didn't find any. All this assumes one is using the Administrator account, or at least an account with Administrator privileges. Also, if you use zip somewhere else to package up the WinPSClient files, do NOT use cygwin's unzip to extract them; it will get some Windows permissions wrong, and nssm (if not more) won't work properly. Aside from that, I haven't figured out how to use the svcs test to detect that the XymonPSClient service is running; maybe I can change it to check for nssm, or have procs check for nssm. But otherwise, WinPSClient seems to be working as well or better as BBWin did on Windows 8, at least on the Windows 10.1 VM on my Mac laptop.
To remove BBWin:
Stop the BBWin service (may be named Big Brother Xymon Client) using the usual service management GUI.
Remove the service; from command line: sc delete BBWin
Once that's done, some quick regedit searches seem to show no leftovers in the registry.
Remove the software; from the command line: rd/s "Program Files (x86)\BBWin"
On Tue, Jan 31, 2017 at 2:56 AM, Alessandro Tinivelli < Alessandro.Tinivelli at faacgroup.com> wrote:
Hi Kris,
believe me, it’s always better to write settings on server side instead of client side.
And, for windows clients, I strongly suggest you to switch to the Zak’s great powershell client, you can get out from svn
"svn checkout http://svn.code.sf.net/p/xymon/code/sandbox/WinPSClient ."
This behaves more like a linux client, and that’s cool
Alessandro
*Da:* Xymon [mailto:xymon-bounces at xymon.com] *Per conto di *Kris Springer
Understood about the server doing the deciphering of the client data. Strange that the Windows clients are easily adjusted on the client end.
I don't have an analysis.d folder. I think I'll just add the custom levels into the analysis.cfg file and see what happens.
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
I would assume it’s just putting this into the analysis.cfg file for the host you want to monitor:
SVC XymonPSClient status=started startup=automatic
However… not sure that will do anything useful? If the service stops it will never send the data to the xymon server so the alert would never trigger, not for the status anyway. As long as you have alerting setup for stuff going purple then you should be fine.
Regards,
Brandon
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Richard Hamilton Sent: Wednesday, 1 February 2017 11:27 AM To: Alessandro Tinivelli <Alessandro.Tinivelli at faacgroup.com> Cc: xymon at xymon.com Subject: Re: [Xymon] [EXCH Prio5]R: [EXCH Prio5]Re: linux client disk warning levels
For those wishing to switch, here's my notes on uninstalling BBWin, since I didn't find any. All this assumes one is using the Administrator account, or at least an account with Administrator privileges. Also, if you use zip somewhere else to package up the WinPSClient files, do NOT use cygwin's unzip to extract them; it will get some Windows permissions wrong, and nssm (if not more) won't work properly. Aside from that, I haven't figured out how to use the svcs test to detect that the XymonPSClient service is running; maybe I can change it to check for nssm, or have procs check for nssm. But otherwise, WinPSClient seems to be working as well or better as BBWin did on Windows 8, at least on the Windows 10.1 VM on my Mac laptop.
To remove BBWin:
Stop the BBWin service (may be named Big Brother Xymon Client) using the usual service management GUI.
Remove the service; from command line: sc delete BBWin
Once that's done, some quick regedit searches seem to show no leftovers in the registry.
Remove the software; from the command line: rd/s "Program Files (x86)\BBWin"
On Tue, Jan 31, 2017 at 2:56 AM, Alessandro Tinivelli <Alessandro.Tinivelli at faacgroup.com<mailto:Alessandro.Tinivelli at faacgroup.com>> wrote: Hi Kris,
believe me, it’s always better to write settings on server side instead of client side.
And, for windows clients, I strongly suggest you to switch to the Zak’s great powershell client, you can get out from svn
"svn checkout http://svn.code.sf.net/p/xymon/code/sandbox/WinPSClient ."
This behaves more like a linux client, and that’s cool
Alessandro
Da: Xymon [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] Per conto di Kris Springer
Understood about the server doing the deciphering of the client data. Strange that the Windows clients are easily adjusted on the client end.
I don't have an analysis.d folder. I think I'll just add the custom levels into the analysis.cfg file and see what happens.
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Of course monitoring for the Xymon Client sounds reasonable except for one important part:
If it’s not running its not sending statuses back to the server and thus it will never show the client services as anything other than started.
The tests instead will go purple. ☺
Thanks, John Upcoming PTO:
John Rothlisberger IT Strategy, Infrastructure & Security - Technology Growth Platform TGP for Business Process Outsourcing Accenture 312.693.3136 office
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Brandon Dale Sent: Tuesday, January 31, 2017 6:46 PM To: Richard Hamilton <rlhamil2 at gmail.com>; Alessandro Tinivelli <Alessandro.Tinivelli at faacgroup.com> Cc: xymon at xymon.com Subject: Re: [Xymon] [EXCH Prio5]R: [EXCH Prio5]Re: linux client disk warning levels
I would assume it’s just putting this into the analysis.cfg file for the host you want to monitor:
SVC XymonPSClient status=started startup=automatic
However… not sure that will do anything useful? If the service stops it will never send the data to the xymon server so the alert would never trigger, not for the status anyway. As long as you have alerting setup for stuff going purple then you should be fine.
Regards,
Brandon
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Richard Hamilton Sent: Wednesday, 1 February 2017 11:27 AM To: Alessandro Tinivelli <Alessandro.Tinivelli at faacgroup.com<mailto:Alessandro.Tinivelli at faacgroup.com>> Cc: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] [EXCH Prio5]R: [EXCH Prio5]Re: linux client disk warning levels
For those wishing to switch, here's my notes on uninstalling BBWin, since I didn't find any. All this assumes one is using the Administrator account, or at least an account with Administrator privileges. Also, if you use zip somewhere else to package up the WinPSClient files, do NOT use cygwin's unzip to extract them; it will get some Windows permissions wrong, and nssm (if not more) won't work properly. Aside from that, I haven't figured out how to use the svcs test to detect that the XymonPSClient service is running; maybe I can change it to check for nssm, or have procs check for nssm. But otherwise, WinPSClient seems to be working as well or better as BBWin did on Windows 8, at least on the Windows 10.1 VM on my Mac laptop.
To remove BBWin:
Stop the BBWin service (may be named Big Brother Xymon Client) using the usual service management GUI.
Remove the service; from command line: sc delete BBWin
Once that's done, some quick regedit searches seem to show no leftovers in the registry.
Remove the software; from the command line: rd/s "Program Files (x86)\BBWin"
On Tue, Jan 31, 2017 at 2:56 AM, Alessandro Tinivelli <Alessandro.Tinivelli at faacgroup.com<mailto:Alessandro.Tinivelli at faacgroup.com>> wrote: Hi Kris,
believe me, it’s always better to write settings on server side instead of client side.
And, for windows clients, I strongly suggest you to switch to the Zak’s great powershell client, you can get out from svn
This behaves more like a linux client, and that’s cool
Alessandro
Da: Xymon [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] Per conto di Kris Springer
Understood about the server doing the deciphering of the client data. Strange that the Windows clients are easily adjusted on the client end.
I don't have an analysis.d folder. I think I'll just add the custom levels into the analysis.cfg file and see what happens.
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.xymon.com_mailman_listinfo_xymon&d=DwMGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=u6KtIBCRNAeN-AbgJjdZe5zZJVFEfq04dnWD-hYNPL_fxJIIFncbL8W6k0NMJtuq&m=2LLVwzjuwWtD2msAwi88xfviUQVcsmgYQxlyCBS0tbQ&s=e2xeYd84G9RJ68tDzqcyMHRqNHqTYV-DtCdShiC9xUI&e=>
This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy.
www.accenture.com
participants (3)
-
BDale＠kitchengroup.com.au
-
john.r.rothlisberger＠accenture.com
-
rlhamil2＠gmail.com