xymon server "could not load hostdata" issue

bogymel＠yahoo.com

27 Jun 2014 27 Jun '14

9:06 a.m.

Hi,

I'm facing an issue with the xymon server.

I have setup a fresh installation of xymon 4.3.17 on a RHEL 6 box. I have only the server defined in hosts.cfg. The main page displays ok, but when I click on a "smiley" it just shows "Cannot load host configuration". In the xymonnet.log I get the following:

2014-06-27 04:24:51 -> Could not connect to Xymon daemon at 10.106.50.129:1984 (Connection refused) 2014-06-27 04:24:51 -> Recipient '10.106.50.129', timeout 15 2014-06-27 04:24:51 -> 1st line: 'extcombo 2000 2291 2617'

I also get this in the Apache error_log:

[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] 2014-06-27 05:01:01 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] -> connect to Xymon daemon at 10.106.50.129:1984 failed (Permission denied), referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> Recipient '10.106.50.129', timeout 15, referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> 1st line: 'hostinfo clone=watchdog.stage.ppaws.net', referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

I have setup the host in /etc/hosts file, the name is resolvable, the 1984 port is opened and accepting connections. The only solution I could find online was to restart the server but that didn't help.

I'm fairly new to xymon, so if I missed something and if any additional info is required I'll be happy to provide.

Thanks.

Show replies by date

cleaver＠terabithia.org

27 Jun 27 Jun

9:43 a.m.

It seems like both xymonnet and the svcstatus.sh CGI are having problems communicating back with xymond.

First step, can you verify that xymond is in fact up and running OK? Is there any error output in xymond.log?

Based on the logs below, it seems 10.106.50.129 the server's own XYMONSERVER IP address? If so, can you connect locally on port 1984 to it? Or run 'xymon 10.106.50.129 ping' from the command line?

For svcstatus.sh, do you see any possible SELinux errors in /var/log/audit/audit.log indicated blocks?

HTH,

-jc

On Fri, June 27, 2014 2:06 am, mania bogdan wrote:

...

Hi,

I'm facing an issue with the xymon server.

I have setup a fresh installation of xymon 4.3.17 on a RHEL 6 box. I have only the server defined in hosts.cfg. The main page displays ok, but when I click on a "smiley" it just shows "Cannot load host configuration". In the xymonnet.log I get the following:

2014-06-27 04:24:51 -> Could not connect to Xymon daemon at 10.106.50.129:1984 (Connection refused) 2014-06-27 04:24:51 -> Recipient '10.106.50.129', timeout 15 2014-06-27 04:24:51 -> 1st line: 'extcombo 2000 2291 2617'

I also get this in the Apache error_log:

[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] 2014-06-27 05:01:01 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] -> connect to Xymon daemon at 10.106.50.129:1984 failed (Permission denied), referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> Recipient '10.106.50.129', timeout 15, referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> 1st line: 'hostinfo clone=watchdog.stage.ppaws.net', referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

I have setup the host in /etc/hosts file, the name is resolvable, the 1984 port is opened and accepting connections. The only solution I could find online was to restart the server but that didn't help.

I'm fairly new to xymon, so if I missed something and if any additional info is required I'll be happy to provide.

Thanks._______________________________________________ Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

bogymel＠yahoo.com

1:22 p.m.

Hi,

Thank you for the quick response.

@Paul: nothing seems to be wrong with Apache, I played with the configuration to no avail. I'm attaching it for reference.

@JC: It seems xymon daemon is running ok, no errors in xymond.log. I can connect to the server on port 1984 both locally and remote. xymon 10.106.50.129 ping command returns the server version.

In audit.log I have this:

type=SYSCALL msg=audit(1403874936.111:817): arch=c000003e syscall=42 success=no exit=-13 a0=3 a1=7fff0a176f60 a2=10 a3=1999999999999999 items=0 ppid=18345 pid=18518 auid=500 uid=48 gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=1 comm="svcstatus.cgi" exe="/usr/libexec/xymon/svcstatus.cgi" subj=unconfined_u:system_r:httpd_sys_script_t:s0 key=(null) type=AVC msg=audit(1403874966.329:820): avc: denied { name_connect } for pid=18645 comm="svcstatus.cgi" dest=1984 scontext=unconfined_u:system_r:httpd_sys_script_t:s0 tcontext=system_u:object_r:port_t:s0 tclass=tcp_socket

I need to mention however that I installed xymon from a custom repo found online because, well, I was lazy to build from source :)

Thanks.

On Friday, June 27, 2014 1:09 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:

It seems like both xymonnet and the svcstatus.sh CGI are having problems communicating back with xymond.

First step, can you verify that xymond is in fact up and running OK? Is there any error output in xymond.log?

Based on the logs below, it seems 10.106.50.129 the server's own XYMONSERVER IP address? If so, can you connect locally on port 1984 to it? Or run 'xymon 10.106.50.129 ping' from the command line?

For svcstatus.sh, do you see any possible SELinux errors in /var/log/audit/audit.log indicated blocks?

HTH,

-jc

On Fri, June 27, 2014 2:06 am, mania bogdan wrote:

...

Hi,

I'm facing an issue with the xymon server.

I have setup a fresh installation of xymon 4.3.17 on a RHEL 6 box. I have only the server defined in hosts.cfg. The main page displays ok, but when I click on a "smiley" it just shows "Cannot load host configuration". In the xymonnet.log I get the following:

2014-06-27 04:24:51 -> Could not connect to Xymon daemon at 10.106.50.129:1984 (Connection refused) 2014-06-27 04:24:51 -> Recipient '10.106.50.129', timeout 15 2014-06-27 04:24:51 -> 1st line: 'extcombo 2000 2291 2617'

I also get this in the Apache error_log:

[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] 2014-06-27 05:01:01 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] -> connect to Xymon daemon at 10.106.50.129:1984 failed (Permission denied), referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> Recipient '10.106.50.129', timeout 15, referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> 1st line: 'hostinfo clone=watchdog.stage.ppaws.net', referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

I have setup the host in /etc/hosts file, the name is resolvable, the 1984 port is opened and accepting connections. The only solution I could find online was to restart the server but that didn't help.

I'm fairly new to xymon, so if I missed something and if any additional info is required I'll be happy to provide.

Thanks._______________________________________________ Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

...

iain＠shihad.org

2:56 p.m.

Looks like selinux is denying the request.

On June 27, 2014 2:22:35 PM GMT+01:00, mania bogdan <bogymel at yahoo.com> wrote:

...

Hi,

Thank you for the quick response.

@Paul: nothing seems to be wrong with Apache, I played with the configuration to no avail. I'm attaching it for reference.

@JC: It seems xymon daemon is running ok, no errors in xymond.log. I can connect to the server on port 1984 both locally and remote. xymon 10.106.50.129 ping command returns the server version.

In audit.log I have this:

type=SYSCALL msg=audit(1403874936.111:817): arch=c000003e syscall=42 success=no exit=-13 a0=3 a1=7fff0a176f60 a2=10 a3=1999999999999999 items=0 ppid=18345 pid=18518 auid=500 uid=48 gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=1 comm="svcstatus.cgi" exe="/usr/libexec/xymon/svcstatus.cgi" subj=unconfined_u:system_r:httpd_sys_script_t:s0 key=(null) type=AVC msg=audit(1403874966.329:820): avc: denied { name_connect } for pid=18645 comm="svcstatus.cgi" dest=1984 scontext=unconfined_u:system_r:httpd_sys_script_t:s0 tcontext=system_u:object_r:port_t:s0 tclass=tcp_socket

I need to mention however that I installed xymon from a custom repo found online because, well, I was lazy to build from source :)

Thanks.

On Friday, June 27, 2014 1:09 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:

It seems like both xymonnet and the svcstatus.sh CGI are having problems communicating back with xymond.

First step, can you verify that xymond is in fact up and running OK? Is there any error output in xymond.log?

Based on the logs below, it seems 10.106.50.129 the server's own XYMONSERVER IP address? If so, can you connect locally on port 1984 to it? Or run 'xymon 10.106.50.129 ping' from the command line?

For svcstatus.sh, do you see any possible SELinux errors in /var/log/audit/audit.log indicated blocks?

HTH,

-jc

On Fri, June 27, 2014 2:06 am, mania bogdan wrote:

...
Hi,

I'm facing an issue with the xymon server.

I have setup a fresh installation of xymon 4.3.17 on a RHEL 6 box. I have only the server defined in hosts.cfg. The main page displays ok, but when I click on a "smiley" it just shows "Cannot load host configuration". In the xymonnet.log I get the following:

2014-06-27 04:24:51 -> Could not connect to Xymon daemon at 10.106.50.129:1984 (Connection refused) 2014-06-27 04:24:51 -> Recipient '10.106.50.129', timeout 15 2014-06-27 04:24:51 -> 1st line: 'extcombo 2000 2291 2617'

I also get this in the Apache error_log:

[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] 2014-06-27 05:01:01 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] -> connect to Xymon daemon at 10.106.50.129:1984 failed (Permission denied), referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> Recipient '10.106.50.129', timeout 15, referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> 1st line: 'hostinfo clone=watchdog.stage.ppaws.net', referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
I have setup the host in /etc/hosts file, the name is resolvable, the

1984

...
port is opened and accepting connections. The only solution I could find online was to restart the server but that didn't help.

I'm fairly new to xymon, so if I missed something and if any additional info is required I'll be happy to provide.

Thanks._______________________________________________ Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

...

Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

-- Sent from my Android phone with K-9 Mail. Please excuse my brevity.

cleaver＠terabithia.org

3:26 p.m.

Hmm. Can you run /usr/sbin/setsebool -P httpd_can_network_connect on? and report the output of: ls -lZ /usr/libexec/xymon/svcstatus.cgi

-jc

On Fri, June 27, 2014 7:56 am, Iain M. Conochie wrote:

...

Looks like selinux is denying the request.

On June 27, 2014 2:22:35 PM GMT+01:00, mania bogdan <bogymel at yahoo.com> wrote:

...
Hi,

Thank you for the quick response.Â

@Paul: nothing seems to be wrong with Apache, I played with the configuration to no avail. I'm attaching it for reference.

@JC: It seems xymon daemon is running ok, no errors in xymond.log. I can connect to the server on port 1984 both locally and remote.Â xymon 10.106.50.129 ping command returns the server version.

In audit.log I have this:

type=SYSCALL msg=audit(1403874936.111:817): arch=c000003e syscall=42 success=no exit=-13 a0=3 a1=7fff0a176f60 a2=10 a3=1999999999999999 items=0 ppid=18345 pid=18518 auid=500 uid=48 gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=1 comm="svcstatus.cgi" exe="/usr/libexec/xymon/svcstatus.cgi" subj=unconfined_u:system_r:httpd_sys_script_t:s0 key=(null) type=AVC msg=audit(1403874966.329:820): avc: Â denied Â { name_connect } for Â pid=18645 comm="svcstatus.cgi" dest=1984 scontext=unconfined_u:system_r:httpd_sys_script_t:s0 tcontext=system_u:object_r:port_t:s0 tclass=tcp_socket

I need to mention however that I installed xymon from a custom repo found online because, well, I was lazy to build from source :)Â

Thanks.

Â

On Friday, June 27, 2014 1:09 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:

It seems like both xymonnet and the svcstatus.sh CGI are having problems communicating back with xymond.

First step, can you verify that xymond is in fact up and running OK? Is there any error output in xymond.log?

Based on the logs below, it seems 10.106.50.129 the server's own XYMONSERVER IP address? If so, can you connect locally on port 1984 to it? Or run 'xymon 10.106.50.129 ping' from the command line?

For svcstatus.sh, do you see any possible SELinux errors in /var/log/audit/audit.log indicated blocks?

HTH,

-jc

On Fri, June 27, 2014 2:06 am, mania bogdan wrote:

...
Hi,

I'm facing an issue with the xymon server.Â

I have setup a fresh installation of xymon 4.3.17 on a RHEL 6 box. I have only the server defined in hosts.cfg. The main page displays ok, but when I click on a "smiley" it just shows "Cannot load host configuration". In the xymonnet.log I get the following:

2014-06-27 04:24:51 -> Â Could not connect to Xymon daemon at 10.106.50.129:1984 (Connection refused) 2014-06-27 04:24:51 -> Â Recipient '10.106.50.129', timeout 15 2014-06-27 04:24:51 -> Â 1st line: 'extcombo 2000 2291 2617'

I also get this in the Apache error_log:

[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] 2014-06-27 05:01:01 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] -> Â connect to Xymon daemon at 10.106.50.129:1984 failed (Permission denied), referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> Â Recipient '10.106.50.129', timeout 15, referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> Â 1st line: 'hostinfo clone=watchdog.stage.ppaws.net', referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
I have setup the host in /etc/hosts file, the name is resolvable, the

1984

...
port is opened and accepting connections. The only solution I could find online was to restart the server but that didn't help.

I'm fairly new to xymon, so if I missed something and if any additional info is required I'll be happy to provide.

Thanks._______________________________________________ Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

...

Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

-- Sent from my Android phone with K-9 Mail. Please excuse my brevity.

bogymel＠yahoo.com

30 Jun 30 Jun

6:26 a.m.

Hi,

J.C., the output of the command is:

ls -lZ /usr/libexec/xymon/svcstatus.cgi -rwxr-xr-x. xymon xymon system_u:object_r:bin_t:s0 /usr/libexec/xymon/svcstatus.cgi

I've disabled selinux though and everything seems in order.

Thanks everyone for the quick and helpful responses.

On Friday, June 27, 2014 6:26 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:

Hmm. Can you run /usr/sbin/setsebool -P httpd_can_network_connect on? and report the output of: ls -lZ /usr/libexec/xymon/svcstatus.cgi

-jc

On Fri, June 27, 2014 7:56 am, Iain M. Conochie wrote:

...

Looks like selinux is denying the request.

On June 27, 2014 2:22:35 PM GMT+01:00, mania bogdan <bogymel at yahoo.com> wrote:

...
Hi,

Thank you for the quick response.Â

@Paul: nothing seems to be wrong with Apache, I played with the configuration to no avail. I'm attaching it for reference.

@JC: It seems xymon daemon is running ok, no errors in xymond.log. I can connect to the server on port 1984 both locally and remote.Â xymon 10.106.50.129 ping command returns the server version.

In audit.log I have this:

type=SYSCALL msg=audit(1403874936.111:817): arch=c000003e syscall=42 success=no exit=-13 a0=3 a1=7fff0a176f60 a2=10 a3=1999999999999999 items=0 ppid=18345 pid=18518 auid=500 uid=48 gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=1 comm="svcstatus.cgi" exe="/usr/libexec/xymon/svcstatus.cgi" subj=unconfined_u:system_r:httpd_sys_script_t:s0 key=(null) type=AVC msg=audit(1403874966.329:820): avc: Â denied Â { name_connect } for Â pid=18645 comm="svcstatus.cgi" dest=1984 scontext=unconfined_u:system_r:httpd_sys_script_t:s0 tcontext=system_u:object_r:port_t:s0 tclass=tcp_socket

I need to mention however that I installed xymon from a custom repo found online because, well, I was lazy to build from source :)Â

Thanks.

Â

On Friday, June 27, 2014 1:09 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:

It seems like both xymonnet and the svcstatus.sh CGI are having problems communicating back with xymond.

First step, can you verify that xymond is in fact up and running OK? Is there any error output in xymond.log?

Based on the logs below, it seems 10.106.50.129 the server's own XYMONSERVER IP address? If so, can you connect locally on port 1984 to it? Or run 'xymon 10.106.50.129 ping' from the command line?

For svcstatus.sh, do you see any possible SELinux errors in /var/log/audit/audit.log indicated blocks?

HTH,

-jc

On Fri, June 27, 2014 2:06 am, mania bogdan wrote:

...
Hi,

I'm facing an issue with the xymon server.Â

I have setup a fresh installation of xymon 4.3.17 on a RHEL 6 box. I have only the server defined in hosts.cfg. The main page displays ok, but when I click on a "smiley" it just shows "Cannot load host configuration". In the xymonnet.log I get the following:

2014-06-27 04:24:51 -> Â Could not connect to Xymon daemon at 10.106.50.129:1984 (Connection refused) 2014-06-27 04:24:51 -> Â Recipient '10.106.50.129', timeout 15 2014-06-27 04:24:51 -> Â 1st line: 'extcombo 2000 2291 2617'

I also get this in the Apache error_log:

[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] 2014-06-27 05:01:01 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] -> Â connect to Xymon daemon at 10.106.50.129:1984 failed (Permission denied), referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> Â Recipient '10.106.50.129', timeout 15, referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] -> Â 1st

...

...
line:

...
'hostinfo clone=watchdog.stage.ppaws.net', referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
[Fri Jun 27 05:03:31 2014] [error] [client 10.106.0.214] 2014-06-27 05:03:31 , referer:

http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

...
I have setup the host in /etc/hosts file, the name is resolvable, the

1984

...
port is opened and accepting connections. The only solution I could find online was to restart the server but that didn't help.

I'm fairly new to xymon, so if I missed something and if any additional info is required I'll be happy to provide.

Thanks._______________________________________________ Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

...

Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

-- Sent from my Android phone with K-9 Mail. Please excuse my brevity.

Paul.Jacobs＠lchclearnet.com

27 Jun 27 Jun

9:48 a.m.

I had similar problems with RHEL7 and 4.3.17 , it was the apache config that turned out to be the culprit. I had to change some of the options for Xymon directories

Alias /xymon/ "/opt/xymon/server/www/" <Directory "/opt/xymon/server/www"> Options All AllowOverride All Require all granted </Directory>

ScriptAlias /xymon-cgi/ "/opt/xymon/cgi-bin/" <Directory "/opt/xymon/cgi-bin"> Allow from all Options All AllowOverride All Require all granted </Directory>

ScriptAlias /xymon-seccgi/ "/opt/xymon/cgi-secure/" <Directory "/opt/xymon/cgi-secure"> AllowOverride None Options ExecCGI Includes Order allow,deny Allow from all

From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of mania bogdan Sent: 27 June 2014 10:07 To: xymon at xymon.com Subject: [Xymon] xymon server "could not load hostdata" issue

Hi,

I'm facing an issue with the xymon server.

2014-06-27 04:24:51 -> Could not connect to Xymon daemon at 10.106.50.129:1984<mailto:daemon at 10.106.50.129:1984> (Connection refused) 2014-06-27 04:24:51 -> Recipient '10.106.50.129', timeout 15 2014-06-27 04:24:51 -> 1st line: 'extcombo 2000 2291 2617'

I also get this in the Apache error_log:

[Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] 2014-06-27 05:01:01 , referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p... [Fri Jun 27 05:01:01 2014] [error] [client 10.106.0.214] -> connect to Xymon daemon at 10.106.50.129:1984<mailto:daemon at 10.106.50.129:1984> failed (Permission denied), referer: http://watchdog.stage.ppaws.net/xymon-cgi/svcstatus.sh?HOST=watchdog.stage.p...

I'm fairly new to xymon, so if I missed something and if any additional info is required I'll be happy to provide.

Thanks.

A copy of the LCH.Clearnet e-mail disclaimer can be found at: www.lchclearnet.com/disclaimer/email

LCH.Clearnet Limited, Registered Office: Aldgate House, 33 Aldgate High Street, London EC3N 1EA. Recognised as a Clearing House under the Financial Services & Markets Act 2000. Reg. in England No. 25932. LCH.Clearnet SA, Siège Social: 18 rue du Quatre Septembre, 75002 Paris, Chambre de Compensation conformément au Code Monétaire et Financier. LCH.Clearnet LLC, Principal Office: 17 State Street, New York, NY 10004. Registered with the U.S. Commodity Futures Trading Commission as a derivatives clearing organization under the U.S. Commodity Exchange Act.

4377

Age (days ago)

4380

Last active (days ago)

List overview

Download

6 comments

4 participants

participants (4)

bogymel＠yahoo.com
cleaver＠terabithia.org
iain＠shihad.org
Paul.Jacobs＠lchclearnet.com