[hobbit] client disk graph differences
I had this same problem, didn't notice it until adding a new client, it seemed some graphs were all mixed in where they had been split before. Some where split as usual. I am not sure if this was the fix, but I had stopped the hobbit server, cleaned $HOBBIT/tmp (all except the chk files), and then restarted. After this, all the graphs were back to being split out.
HTH.
Al
-----Original Message----- From: Michael Nemeth [mailto:michael.nemeth at lmco.com] Sent: Tuesday, October 18, 2005 9:12 AM To: hobbit at hswn.dk Subject: Re: [hobbit] client disk graph differences
Did you get an answer to this ? If you did can you tell me it! Ive got the same problem!
Pat Vaughan wrote:
I don't know if any else had noticed this, but I just started experimenting with the hobbit client in 4.1.2. I've found that the Hobbit server generates the disk RRD graphs in seperate graphs of 4 filesystems each. Which is a behavior I'd like to use in some of my custom graphs, but I don't see how to set that.
But, on the server with the new Hobbit client, all of the filesystems are thrown into one big graph. With over 40 filesystems on this one server, the graph isn't too usefull.
Is there a setting somewhere to tell Hobbit to split up X rrd files into seperate graphs?
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | _p_ Mike Nemeth | ___| |_____ email(w) michael.nemeth at lmco.com Work: 856 359-1425
|><___________) | Home Page:http://www.geocities.com/mjnemeth/ | Work Page:http://faraday.motown.lmco.com:3000/~nemethm/ | Work Page:http://ortsweb/~mnemeth/ |++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
No didn't work for me .
Jeffcoat, Al wrote:
I had this same problem, didn't notice it until adding a new client, it seemed some graphs were all mixed in where they had been split before. Some where split as usual. I am not sure if this was the fix, but I had stopped the hobbit server, cleaned $HOBBIT/tmp (all except the chk files), and then restarted. After this, all the graphs were back to being split out.
HTH.
Al
-----Original Message----- From: Michael Nemeth [mailto:michael.nemeth at lmco.com] Sent: Tuesday, October 18, 2005 9:12 AM To: hobbit at hswn.dk Subject: Re: [hobbit] client disk graph differences
Did you get an answer to this ? If you did can you tell me it! Ive got the same problem!
Pat Vaughan wrote:
I don't know if any else had noticed this, but I just started experimenting with the hobbit client in 4.1.2. I've found that the
Hobbit
server generates the disk RRD graphs in seperate graphs of 4
filesystems
each. Which is a behavior I'd like to use in some of my custom graphs, but I don't see how to set that.
But, on the server with the new Hobbit client, all of the filesystems
are
thrown into one big graph. With over 40 filesystems on this one
server,
the graph isn't too usefull.
Is there a setting somewhere to tell Hobbit to split up X rrd files
into
seperate graphs?
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
--
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
| _p_ Mike Nemeth
| ___| |_____ email(w) michael.nemeth at lmco.com Work: 856 359-1425
|><___________) | Home Page:http://www.geocities.com/mjnemeth/
| Work Page:http://faraday.motown.lmco.com:3000/~nemethm/
| Work Page:http://ortsweb/~mnemeth/
|++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Me either.
No didn't work for me .
Jeffcoat, Al wrote:
I had this same problem, didn't notice it until adding a new client, it seemed some graphs were all mixed in where they had been split before. Some where split as usual. I am not sure if this was the fix, but I had stopped the hobbit server, cleaned $HOBBIT/tmp (all except the chk files), and then restarted. After this, all the graphs were back to being split out.
HTH.
Al
-----Original Message----- From: Michael Nemeth [mailto:michael.nemeth at lmco.com] Sent: Tuesday, October 18, 2005 9:12 AM To: hobbit at hswn.dk Subject: Re: [hobbit] client disk graph differences
Did you get an answer to this ? If you did can you tell me it! Ive got the same problem!
Pat Vaughan wrote:
I don't know if any else had noticed this, but I just started experimenting with the hobbit client in 4.1.2. I've found that the
Hobbit
server generates the disk RRD graphs in seperate graphs of 4
filesystems
each. Which is a behavior I'd like to use in some of my custom graphs, but I don't see how to set that.
But, on the server with the new Hobbit client, all of the filesystems
are
thrown into one big graph. With over 40 filesystems on this one
server,
the graph isn't too usefull.
Is there a setting somewhere to tell Hobbit to split up X rrd files
into
seperate graphs?
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | _p_ Mike Nemeth | ___| |_____ email(w) michael.nemeth at lmco.com Work: 856 359-1425 |><___________) | Home Page:http://www.geocities.com/mjnemeth/ | Work Page:http://faraday.motown.lmco.com:3000/~nemethm/ | Work Page:http://ortsweb/~mnemeth/ |++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Hi
You are probably looking for the "--multigraphs" option specified as part of "CGI_SVC_OPTS" variable within "hobbitcgi.cfg".
For example if you have a custom test called "myextratest" you should specify something like this: CGI_SVC_OPTS="--env=/opt/hobbit/server/etc/hobbitserver.cfg --no-svcid --history=top --multigraphs=myextratest,disk"
Remember to include "disk", since by specifying this option you overwrite the default values and disk will be no longer split up. You can also find the description for this option within the HOBBITD_FILESTORE man page.
Best wishes, Anatoli Bogajewski
michael.nemeth at lmco.com schrieb am 19.10.2005 11:51:10:
No didn't work for me .
Jeffcoat, Al wrote: I had this same problem, didn't notice it until adding a new client, it seemed some graphs were all mixed in where they had been split before. Some where split as usual. I am not sure if this was the fix, but I had stopped the hobbit server, cleaned $HOBBIT/tmp (all except the chk files), and then restarted. After this, all the graphs were back to being split out.
HTH.
Al
-----Original Message----- From: Michael Nemeth [mailto:michael.nemeth at lmco.com] Sent: Tuesday, October 18, 2005 9:12 AM To: hobbit at hswn.dk Subject: Re: [hobbit] client disk graph differences
Did you get an answer to this ? If you did can you tell me it! Ive got the same problem!
Pat Vaughan wrote:
I don't know if any else had noticed this, but I just started experimenting with the hobbit client in 4.1.2. I've found that the
Hobbit
server generates the disk RRD graphs in seperate graphs of 4
filesystems
each. Which is a behavior I'd like to use in some of my custom graphs, but I don't see how to set that.
But, on the server with the new Hobbit client, all of the filesystems
are
thrown into one big graph. With over 40 filesystems on this one
server,
the graph isn't too usefull.
Is there a setting somewhere to tell Hobbit to split up X rrd files
into
seperate graphs?
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ | _p_ Mike Nemeth | ___| |_____ email(w) michael.nemeth at lmco.com Work: 856 359-1425
|><___________) | Home Page:http://www. geocities.com/mjnemeth/ | Work Page:http://faraday.motown.lmco.com:3000/~nemethm/ | Work Page:http://ortsweb/~mnemeth/ |++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
That almost works. What I get when I enable that option is a single graph with only the first rrd file on it. I use it to graph error counts on each port of a fibre switch. The graph now shows only the first port on each switch. If I remove this option, it displays all of the ports on a single graph. Here is my graph definition:
[diagshow] FNPATTERN diagshow,port(.*).rrd TITLE Port LLI Errors YAXIS Errors DEF:LLIERRORS at RRDIDX@=@RRDFN@:LLIERRORS:AVERAGE LINE2:LLIERRORS at RRDIDX@#@COLOR@:@RRDPARAM@ COMMENT:\n GPRINT:LLIERRORS at RRDIDX@:LAST:LLI Errors \: %5.1lf (cur) GPRINT:LLIERRORS at RRDIDX@:MAX: \: %5.1lf (max) GPRINT:LLIERRORS at RRDIDX@:MIN: \: %5.1lf (min) GPRINT:LLIERRORS at RRDIDX@:AVERAGE: \: %5.1lf (avg)\n
Hi
You are probably looking for the "--multigraphs" option specified as part of "CGI_SVC_OPTS" variable within "hobbitcgi.cfg".
For example if you have a custom test called "myextratest" you should specify something like this: CGI_SVC_OPTS="--env=/opt/hobbit/server/etc/hobbitserver.cfg --no-svcid --history=top --multigraphs=myextratest,disk"
Remember to include "disk", since by specifying this option you overwrite the default values and disk will be no longer split up. You can also find the description for this option within the HOBBITD_FILESTORE man page.
Best wishes, Anatoli Bogajewski
Hi
What happens if you use "FNPATTERN diagshow.(.*).rrd" ?
This is my working definition for system activity reporter:
[sar] FNPATTERN sar.(.*).rrd TITLE Device Workload YAXIS % Busy DEF:sar at RRDIDX@=@RRDFN@:sar:AVERAGE LINE2:sar at RRDIDX@#@COLOR@:@RRDPARAM@ -u 100 -l 0 GPRINT:sar at RRDIDX@:LAST: \: %5.1lf (cur) GPRINT:sar at RRDIDX@:MAX: \: %5.1lf (max) GPRINT:sar at RRDIDX@:MIN: \: %5.1lf (min) GPRINT:sar at RRDIDX@:AVERAGE: \: %5.1lf (avg)\n
Rrds are dropped with names like sar,DEVICENR.rrd. At the moment about 20 devices displayed well in groups of four graphs.
But this is for hobbit 4.0.4. Just noticed, that there are some problems with displaying disks graphs on another system running hobbit 4.1.2. Not sure that both things are correlated, but as you discussed prior, all of the disk graphs for remote clients are displayed in one single graph.
Still investigating.
So long, Anatoli
patrick_a_vaughan at hotmail.com schrieb am 20.10.2005 15:22:43:
That almost works. What I get when I enable that option is a single graph with only the first rrd file on it. I use it to graph error counts on each port of a fibre switch. The graph now shows only the first port on each switch. If I remove this option, it displays all of the ports on a single graph. Here is my graph definition:
[diagshow] FNPATTERN diagshow,port(.*).rrd TITLE Port LLI Errors YAXIS Errors DEF:LLIERRORS at RRDIDX@=@RRDFN@:LLIERRORS:AVERAGE LINE2:LLIERRORS at RRDIDX@#@COLOR@:@RRDPARAM@ COMMENT:\n GPRINT:LLIERRORS at RRDIDX@:LAST:LLI Errors \: %5.1lf (cur) GPRINT:LLIERRORS at RRDIDX@:MAX: \: %5.1lf (max) GPRINT:LLIERRORS at RRDIDX@:MIN: \: %5.1lf (min) GPRINT:LLIERRORS at RRDIDX@:AVERAGE: \: %5.1lf (avg)\n
Hi
You are probably looking for the "--multigraphs" option specified as part of "CGI_SVC_OPTS" variable within "hobbitcgi.cfg".
For example if you have a custom test called "myextratest" you should specify something like this: CGI_SVC_OPTS="--env=/opt/hobbit/server/etc/hobbitserver.cfg --no-svcid --history=top --multigraphs=myextratest,disk"
Remember to include "disk", since by specifying this option you overwrite the default values and disk will be no longer split up. You can also find the description for this option within the HOBBITD_FILESTORE man page.
Best wishes, Anatoli Bogajewski
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
I get the same results with either expression. Either I get one big graph, or only the first rrd file is graphed with the --multigraphs option in hobbitcgi.cfg
What happens if you use "FNPATTERN diagshow.(.*).rrd" ?
This is my working definition for system activity reporter:
[sar] FNPATTERN sar.(.*).rrd TITLE Device Workload YAXIS % Busy DEF:sar at RRDIDX@=@RRDFN@:sar:AVERAGE LINE2:sar at RRDIDX@#@COLOR@:@RRDPARAM@ -u 100 -l 0 GPRINT:sar at RRDIDX@:LAST: \: %5.1lf (cur) GPRINT:sar at RRDIDX@:MAX: \: %5.1lf (max) GPRINT:sar at RRDIDX@:MIN: \: %5.1lf (min) GPRINT:sar at RRDIDX@:AVERAGE: \: %5.1lf (avg)\n
Rrds are dropped with names like sar,DEVICENR.rrd. At the moment about 20 devices displayed well in groups of four graphs.
But this is for hobbit 4.0.4. Just noticed, that there are some problems with displaying disks graphs on another system running hobbit 4.1.2. Not sure that both things are correlated, but as you discussed prior, all of the disk graphs for remote clients are displayed in one single graph.
Still investigating.
So long, Anatoli
patrick_a_vaughan at hotmail.com schrieb am 20.10.2005 15:22:43:
That almost works. What I get when I enable that option is a single graph with only the first rrd file on it. I use it to graph error counts on each port of a fibre switch. The graph now shows only the first port on each switch. If I remove this option, it displays all of the ports on a single graph. Here is my graph definition:
[diagshow] FNPATTERN diagshow,port(.*).rrd TITLE Port LLI Errors YAXIS Errors DEF:LLIERRORS at RRDIDX@=@RRDFN@:LLIERRORS:AVERAGE LINE2:LLIERRORS at RRDIDX@#@COLOR@:@RRDPARAM@ COMMENT:\n GPRINT:LLIERRORS at RRDIDX@:LAST:LLI Errors \: %5.1lf (cur) GPRINT:LLIERRORS at RRDIDX@:MAX: \: %5.1lf (max) GPRINT:LLIERRORS at RRDIDX@:MIN: \: %5.1lf (min) GPRINT:LLIERRORS at RRDIDX@:AVERAGE: \: %5.1lf (avg)\n
Hi
You are probably looking for the "--multigraphs" option specified as part of "CGI_SVC_OPTS" variable within "hobbitcgi.cfg".
For example if you have a custom test called "myextratest" you should specify something like this: CGI_SVC_OPTS="--env=/opt/hobbit/server/etc/hobbitserver.cfg --no-svcid --history=top --multigraphs=myextratest,disk"
Remember to include "disk", since by specifying this option you overwrite the default values and disk will be no longer split up. You can also find the description for this option within the HOBBITD_FILESTORE man page.
Best wishes, Anatoli Bogajewski
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
participants (4)
-
Al.Jeffcoat＠orhs.org
-
cits.bogajewski＠daimlerchrysler.com
-
michael.nemeth＠lmco.com
-
patrick_a_vaughan＠hotmail.com