Im using xymon for many years I just wondering is there a easy way to make the output more readable?
Filesystem 1024-blocks Used Available Capacity Mounted on /dev/mapper/sysvg-root 10321208 4397592 5399328 45% / /dev/sda1 1032088 152244 827416 16% /boot /dev/mapper/sysvg-vz 1898719656 249544968 1552725360 14% /vz
As you see there is no scaling in the output to GB etc
Thanxs
Steffan
Steffan
The table shown in the disk test page is directly from the "df" command executed on the client. This can't be modified without also changing the parser (in xymond_client), because it assumes that the numbers are in blocks.
It would be possible to make your own test column to use in place of "disk" and then reformat the client data message to your liking - perhaps even constructing an HTML table. However you'd either have to name it something other than "disk" and have two tests almost the same, or you'd need to somehow suppress the "disk" message from the xymond_client process. I'm not sure how you would do this.
Of course it's open source, so you're free to adjust xymond_client to reformat the disk status message any way you see fit. In short, I don't see any easy way to do this.
Cheers Jeremy
On 30 August 2017 at 18:27, Steffan Noord <steffannoord at gmail.com> wrote:
Im using xymon for many years I just wondering is there a easy way to make the output more readable?
Filesystem 1024-blocks Used Available Capacity Mounted on /dev/mapper/sysvg-root 10321208 4397592 5399328 45% / /dev/sda1 1032088 152244 827416 16% /boot /dev/mapper/sysvg-vz 1898719656 249544968 1552725360 14% /vz
As you see there is no scaling in the output to GB etc
Thanxs
Steffan
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
That's the advantage of using df -B G. It's still working in blocks and just increases the size of the blocks. Jeremy Ruffer
On 3 September 2017 at 10:48, Jeremy Laidman <jlaidman at rebel-it.com.au> wrote:
Steffan
The table shown in the disk test page is directly from the "df" command executed on the client. This can't be modified without also changing the parser (in xymond_client), because it assumes that the numbers are in blocks.
It would be possible to make your own test column to use in place of "disk" and then reformat the client data message to your liking - perhaps even constructing an HTML table. However you'd either have to name it something other than "disk" and have two tests almost the same, or you'd need to somehow suppress the "disk" message from the xymond_client process. I'm not sure how you would do this.
Of course it's open source, so you're free to adjust xymond_client to reformat the disk status message any way you see fit. In short, I don't see any easy way to do this.
Cheers Jeremy
On 30 August 2017 at 18:27, Steffan Noord <steffannoord at gmail.com> wrote:
Im using xymon for many years I just wondering is there a easy way to make the output more readable?
Filesystem 1024-blocks Used Available Capacity Mounted on /dev/mapper/sysvg-root 10321208 4397592 5399328 45% / /dev/sda1 1032088 152244 827416 16% /boot /dev/mapper/sysvg-vz 1898719656 249544968 1552725360 14% /vz
As you see there is no scaling in the output to GB etc
Thanxs
Steffan
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Thanxs all
Van: Xymon [mailto:xymon-bounces at xymon.com] Namens Jeremy Laidman Verzonden: zondag 3 september 2017 11:48 Aan: Steffan Noord <steffannoord at gmail.com> CC: xymon at xymon.com Onderwerp: Re: [Xymon] Human readable disk space
Steffan
The table shown in the disk test page is directly from the "df" command executed on the client. This can't be modified without also changing the parser (in xymond_client), because it assumes that the numbers are in blocks.
It would be possible to make your own test column to use in place of "disk" and then reformat the client data message to your liking - perhaps even constructing an HTML table. However you'd either have to name it something other than "disk" and have two tests almost the same, or you'd need to somehow suppress the "disk" message from the xymond_client process. I'm not sure how you would do this.
Of course it's open source, so you're free to adjust xymond_client to reformat the disk status message any way you see fit. In short, I don't see any easy way to do this.
Cheers
Jeremy
On 30 August 2017 at 18:27, Steffan Noord <steffannoord at gmail.com <mailto:steffannoord at gmail.com> > wrote:
Im using xymon for many years I just wondering is there a easy way to make the output more readable?
Filesystem 1024-blocks Used Available Capacity Mounted on /dev/mapper/sysvg-root 10321208 4397592 5399328 45% / /dev/sda1 1032088 152244 827416 16% /boot /dev/mapper/sysvg-vz 1898719656 249544968 1552725360 14% /vz
As you see there is no scaling in the output to GB etc
Thanxs
Steffan
Xymon mailing list Xymon at xymon.com <mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
participants (4)
-
jeremy.ruffer＠gmail.com
-
jlaidman＠rebel-it.com.au
-
mailinglist＠tikklik.nl
-
steffannoord＠gmail.com