On 7/20/07, Martijn Moret <martijn at mmoret.com> wrote:

...

Hi,

I'm trying to write a template for the Brocade silkworm 3900/4100.

All is going well, except for the thresholds.

Here is my config: Example for the fans: oids FanDescr : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4.2 : branch FanState : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5.2 : branch

message TABLE: Fan location|Fan state {FanDescr}|{FanState.color}{FanState}

threshold FanState : red : 3200 : High rpm

When running devmon in the forground, the following message appears when activating this threshold: Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894.

There are six fans, this line appears one time for each fan.

Don't worry about those errors. I get those too but it is working just fine. What problem are you having besides those messages?

Thanks for your quick reply. The thresholds are not working. I setup a test with the fans (they are running between 3000 and 3250 rpm). If I set the threshold yellow to >3200 no fan is turning yellow. I think the thresholds are not being used as no comparison is being made.

Regards Martijn

On 7/20/07, Martijn Moret <martijn at mmoret.com> wrote:

...

On 7/20/07, Martijn Moret <martijn at mmoret.com> wrote:

...

Hi,

I'm trying to write a template for the Brocade silkworm 3900/4100.

All is going well, except for the thresholds.

Here is my config: Example for the fans: oids FanDescr : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4.2 : branch FanState : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5.2 : branch

message TABLE: Fan location|Fan state {FanDescr}|{FanState.color}{FanState}

threshold FanState : red : 3200 : High rpm

When running devmon in the forground, the following message appears

when

...

activating this threshold: Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894. Use of uninitialized value in numeric gt (>) at /home/hobbit/devmon-0.3.0-beta2/modules/dm_tests.pm line 2314, <$__ANONIO__> line 21894.

There are six fans, this line appears one time for each fan.

Don't worry about those errors. I get those too but it is working just fine. What problem are you having besides those messages?

Some more info: It works fine with 'leave' oids and fails with 'branch' oids.

I only used leaf. And before you use a oid you want to make sure snmpget gives you valid output with that `oid'

Here is an example of a custom template I use for Arbor DOS routers

(hobbit)@hobbit:~/server/etc$ cat /usr/local/devmon/templates/arbor-lead/cpu/thresholds

CPULoadAvg5Min : red : >800 : CPU utilization is high: {CPULoadAvg5Min}

sysUpTimeSecs : red : <600 : Device rebooted recently. System uptime: {UpTimeTxt} sysUpTimeSecs : yellow : <5000 : Device rebooted recently. System uptime: {UpTimeTxt} sysUpTimeSecs : green : : System uptime: {UpTimeTxt}

(hobbit)@hobbit:~/server/etc$ cat /usr/local/devmon/templates/arbor-lead/cpu/oids

sysDescr : .1.3.6.1.2.1.1.1.0 : leaf sysUpTime : .1.3.6.1.2.1.1.3.0 : leaf CPULoadAvg1Min : .1.3.6.1.4.1.9694.1.4.2.1.1.0 : leaf CPULoadAvg5Min : .1.3.6.1.4.1.9694.1.4.2.1.2.0 : leaf CPULoadAvg15Min : .1.3.6.1.4.1.9694.1.4.2.1.3.0 : leaf

Regards

Martijn

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

-- Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu

On Fri, 2007-07-20 at 19:03 +0200, Martijn Moret wrote:

...

Hi,

I'm trying to write a template for the Brocade silkworm 3900/4100.

All is going well, except for the thresholds.

Here is my config: Example for the fans: oids FanDescr : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.4.2 : branch FanState : .1.3.6.1.4.1.1588.2.1.1.1.10.3.1.5.2 : branch

message TABLE: Fan location|Fan state {FanDescr}|{FanState.color}{FanState}

threshold FanState : red : 3200 : High rpm

This should be >3200

Trent

The documentation states thats the default behaviour is 'greater than'.

I think I found the problem: The snmp branch does not start with .1 but .2 I will look in the Brocade MIB some more.... Martijn