Hey,
I'm having problems scripting the disable.
I'm using ksh. Here's what I'm doing:
$HOBBIT_HOME/bin/bb 198.168.0.222 "\"disable $machine.http -1 Running Deployment of from $FROM_STREAM to $TO_STREAM\""
Here's the debug output:
- machine=server1
- HOBBIT_HOME=/home/hobbit/client
- FROM_STREAM=TEST1
- TO_STREAM=TEST2
- /home/hobbit/client/bin/bb 198.168.0.222 "disable tiers_trnprd6.http -1 Running Deployment from TEST1 to TEST2"
It doesn't work. Now if I grab the bottom line using cut and paste, and execute it on the line manually, it works just fine.
I know it's the way you have to put the disable in double quotes, but I can't seem to get it to work.
Any help would be appreciated.
Thanks..James
-----Original Message----- From: James Wade [mailto:jkwade at futurefrontiers.com] Sent: Thursday, October 04, 2007 1:05 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Disable of http Test
What about disable until O.K.?
I looked at the manpage and didn't see it.
Thanks....James
-----Original Message----- From: Tom Georgoulias [mailto:tomg at mcclatchyinteractive.com] Sent: Thursday, October 04, 2007 11:54 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Disable of http Test
Josh Luthman wrote:
Just to clarify this, is this command
/home/shire/server/bin/bbcmd bin/bb 127.0.0.1 "disable foo.conn 60" then?
Is the 60 in seconds or minutes?
Minutes.
To run that command from a remote server and not on the hobbit server, you would need to use $BBDISP instead of 127.0.0.1.
Tom
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
I think you just need to remove the outer quotes...
$HOBBIT_HOME/bin/bb 198.168.0.222 \"disable $machine.http -1 Running Deployment of from $FROM_STREAM to $TO_STREAM\"
=G=
-----Original Message----- From: James Wade [mailto:jkwade at futurefrontiers.com] Sent: Friday, October 05, 2007 4:45 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Disable of http Test
Hey,
I'm having problems scripting the disable.
I'm using ksh. Here's what I'm doing:
$HOBBIT_HOME/bin/bb 198.168.0.222 "\"disable $machine.http -1 Running Deployment of from $FROM_STREAM to $TO_STREAM\""
Here's the debug output:
- machine=server1
- HOBBIT_HOME=/home/hobbit/client
- FROM_STREAM=TEST1
- TO_STREAM=TEST2
- /home/hobbit/client/bin/bb 198.168.0.222 "disable tiers_trnprd6.http -1 Running Deployment from TEST1 to TEST2"
It doesn't work. Now if I grab the bottom line using cut and paste, and execute it on the line manually, it works just fine.
I know it's the way you have to put the disable in double quotes, but I can't seem to get it to work.
Any help would be appreciated.
Thanks..James
-----Original Message----- From: James Wade [mailto:jkwade at futurefrontiers.com] Sent: Thursday, October 04, 2007 1:05 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Disable of http Test
What about disable until O.K.?
I looked at the manpage and didn't see it.
Thanks....James
-----Original Message----- From: Tom Georgoulias [mailto:tomg at mcclatchyinteractive.com] Sent: Thursday, October 04, 2007 11:54 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Disable of http Test
Josh Luthman wrote:
Just to clarify this, is this command
/home/shire/server/bin/bbcmd bin/bb 127.0.0.1 "disable foo.conn 60" then?
Is the 60 in seconds or minutes?
Minutes.
To run that command from a remote server and not on the hobbit server, you would need to use $BBDISP instead of 127.0.0.1.
Tom
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Also be aware that I believe Hobbit by default will not accept commands from remote hosts, only status updates. To enable a remote host to send commands, see the --admin-senders option of hobbitlaunch.cfg. Don't forget to restart hobbit to enable the change.
-Charles
I'm with Galen on this one.
Almost every time I encounter or see a situation where you can copy/paste a command into the shell but it doesn't work in a script using the same shell it tends to be some sort of formatting issue (in this case, quotes).
On 10/5/07, Charles Jones <jonescr at cisco.com> wrote:
Also be aware that I believe Hobbit by default will not accept commands from remote hosts, only status updates. To enable a remote host to send commands, see the --admin-senders option of hobbitlaunch.cfg. Don't forget to restart hobbit to enable the change.
-Charles
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
participants (4)
-
Galen.Johnson＠sas.com
-
jkwade＠futurefrontiers.com
-
jonescr＠cisco.com
-
josh＠imaginenetworksllc.com