Do you have ISEE installed on these servers? If so your hardware will be automatically monitored and alerts will go out to HP automatically.

ISEE comes with your support contract and is easy to set up.

Robert Manocchia UNIX System Administrator IDEXX Laboratories 207 556-6860 EMail Robert-Manocchia at idexx.com

-----Original Message----- From: T.J. Yang [mailto:tj_yang at hotmail.com] Sent: Friday, September 14, 2007 9:04 AM To: hobbit at hswn.dk Subject: RE: [hobbit] HP PA-RISC Hardware monitoring ?

Hi, Thomas

But ioscan is jus a scan of existing hardwares, it doesn't tell if each component is ok or not. following is an example of a C3600.

root at 8519> uname -a HP-UX ilad8519 B.11.11 U 9000/785 2013140223 unlimited-user license root at 8519> model 9000/785/C3600 root at 8519> ioscan -k H/W Path Class Description

           bc

10 ioa System Bus Adapter (582) 10/0 ba Local PCI Bus Adapter (782) 10/0/12/0 lan HP PCI 10/100Base-TX Core 10/0/13/0 audio Built-in Audio 10/0/14/0 ext_bus IDE Primary Channel 10/0/14/0.0 target 10/0/14/0.0.0 disk TEAC CD-532E-B 10/0/14/0.7 target 10/0/14/0.7.0 ctl Initiator 10/0/14/1 ba PCI Core I/O Adapter 10/0/14/1/1 tty Built-in RS-232C 10/0/14/1/2 tty Built-in RS-232C 10/0/14/1/3 ext_bus Built-in Parallel Interface 10/0/14/1/4 siopc Built-in Floppy Drive 10/0/14/1/4.1 floppy HP_PC_FDC_FLOPPY 10/0/14/2 usb Built-in USB Interface 10/0/14/2.1 usbhub USB Root Hub 10/0/15/0 ext_bus SCSI C896 Ultra Narrow Single-Ended 10/0/15/0.7 target 10/0/15/0.7.0 ctl Initiator 10/0/15/1 ext_bus SCSI C896 Ultra2 Wide LVD 10/0/15/1.5 target 10/0/15/1.5.0 disk QUANTUM ATLAS10K-9LVD 10/0/15/1.6 target 10/0/15/1.6.0 disk QUANTUM ATLAS10K-9LVD 10/0/15/1.7 target 10/0/15/1.7.0 ctl Initiator 10/1 ba Local PCI Bus Adapter (782) 10/1/4/0 lan PCI Ethernet (11484320) 10/4 ba Local PCI Bus Adapter (782) 10/6 ba Local PCI Bus Adapter (782) 10/6/2/0 graphics PCI Display (103c108b) 32 processor Processor 49 memory Memory root at 8519>

T.J. Yang

Date: Fri, 14 Sep 2007 10:26:49 +0200 From: thomas.seglard at mxp4.com To: hobbit at hswn.dk Subject: Re: [hobbit] HP PA-RISC Hardware monitoring ?

Hi !

the magical command on HP-UX (PA-RISC) is 'ioscan' on HP-UX (IA64) it's 'machinfo'. For example, if you want information on processors or fc hba, you could make :

ioscan -fknC processor | grep -i processor

ioscan -fknC fc | grep -i fc

or simply :

ioscan -fknC

to see all possibilities. Hobbit runs just fine on this kind of hardware, I've tested it for months on HP-UX 10.20, 11.00, 11i. You just need 'gcc' and GNU 'make' to build clients and that's all. Sincerly,

ThomaS

T.J. Yang a écrit :

...

Anyone know is there a module (bb or hb) to monitor HP hardware ? May be better question is what is the similar command for ipmitool or prtdiage in HP-UX ?

T.J. Yang

---

Capture your memories in an online journal! http://www.reallivemoms.com?ocid=TXT_TAGHM&loc=us To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

Kick back and relax with hot games and cool activities at the Messenger Café. http://www.cafemessenger.com?ocid=TXT_TAGLM_SeptWLtagline To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk