On Fri, 2 Mar 2012, Venkatesh Subbaramu wrote:

Thanks Chris  ! Somebody had changed the bbwin.cfg which was causing the problem .Thanks again for your input .

 

I did have another question .I have many counters like dbcheck ,xymond ,port which I do not want to display .How can this be hidden ?

General, you put only the test you want to see with group-only in your host.cfg http://www.xymon.com/xymon/help/manpages/man5/hosts.cfg.5.html group-only COLUMN1|COLUMN2|COLUMN3 [group-title] Same as the "group" and "group-compress" lines, but includes only the columns explicitly listed in the group. Any columns not listed will be ignored for these hosts. cheers, martin

 

Regards,

Venkatesh

 

From: Chris.Morris at rwe.com [mailto:Chris.Morris at rwe.com] Sent: Friday, March 02, 2012 2:22 PM To: Venkatesh Subbaramu Cc: xymon at xymon.com Subject: RE: [Xymon] (no subject)

 

The xymon client isn't running hence not sending data to the server! Or the xymon client is running but sending data to the wrong place!

 

_____________________________________________________________________________________________________________________________________________________

From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Venkatesh Subbaramu Sent: 01 March 2012 11:00 To: xymon at xymon.com Subject: [Xymon] (no subject)

Hi All , The xymon counters (like CPU,disk, memory etc ) being monitored for remote server  (2nd server in the list ) is not getting updated .However the server is available .Could you pls suggest dome troubleshooting tips ?

 

 

Regards,

Venkatesh

 

****************************************************************************

The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system.Please note that neither the RWE Group of Companies nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any).

 

*****************************************************************************

 

**************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS***

use the :- group-except COLUMN1|COLUMN2|COLUMN3 [group-title] Same as the "group-only" lines, but includes all columns EXCEPT those explicitly listed in the group. Any columns listed will be ignored for these hosts - all other columns are shown. in hosts.cfg on the xymon server. Try reading the xymon help pages or man pages before posting here - these are really basic questions. ________________________________ From: Venkatesh Subbaramu [mailto:Venkatesh_S04 at infosys.com] Sent: 02 March 2012 10:13 To: Morris, Chris (SS-IS) Cc: xymon at xymon.com Subject: RE: [Xymon] (no subject) Thanks Chris ! Somebody had changed the bbwin.cfg which was causing the problem .Thanks again for your input . I did have another question .I have many counters like dbcheck ,xymond ,port which I do not want to display .How can this be hidden ? Regards, Venkatesh From: Chris.Morris at rwe.com [mailto:Chris.Morris at rwe.com] Sent: Friday, March 02, 2012 2:22 PM To: Venkatesh Subbaramu Cc: xymon at xymon.com Subject: RE: [Xymon] (no subject) The xymon client isn't running hence not sending data to the server! Or the xymon client is running but sending data to the wrong place! ________________________________ From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Venkatesh Subbaramu Sent: 01 March 2012 11:00 To: xymon at xymon.com Subject: [Xymon] (no subject) Hi All , The xymon counters (like CPU,disk, memory etc ) being monitored for remote server (2nd server in the list ) is not getting updated .However the server is available .Could you pls suggest dome troubleshooting tips ? Regards, Venkatesh ************************************************************************ **** The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system.Please note that neither the RWE Group of Companies nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any). ************************************************************************ ***** **************** CAUTION - Disclaimer ***************** This e-mail contains PRIVILEGED AND CONFIDENTIAL INFORMATION intended solely for the use of the addressee(s). If you are not the intended recipient, please notify the sender by e-mail and delete the original message. Further, you are not to copy, disclose, or distribute this e-mail or its contents to any other person and any such actions are unlawful. This e-mail may contain viruses. Infosys has taken every reasonable precaution to minimize this risk, but is not liable for any damage you may sustain as a result of any virus in this e-mail. You should carry out your own virus checks before opening the e-mail or attachment. Infosys reserves the right to monitor and review the content of all messages sent to or from this e-mail address. Messages sent to or from this e-mail address may be stored on the Infosys e-mail system. ***INFOSYS******** End of Disclaimer ********INFOSYS*** **************************************************************************** The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system.Please note that neither the RWE Group of Companies nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any). *****************************************************************************