Lars Ebeling wrote:

From: "martin roby" <stonepound at gmail.com>

...

Hello Everyone,

I am wondering if I can get the binaries for the hobbit client for hp-ux B.11 ? Try http://leopg9.no-ip.org/client.tar it is for HP-UX 11.11 on 32-bits PA-RISC processor.

SD depots are here: http://www.razorsedge.org/~mike/software/hobbit/hpux/

-- -mike

Just wonder if my tarfile worked?

Lars

----- Original Message ----- From: "Camp, Neil D. (ManTech) CTR" <neil.camp.ctr at deca.mil> To: <hobbit at hswn.dk> Sent: Tuesday, May 08, 2007 1:39 PM Subject: RE: [hobbit] hp-ux B.11 port?

Compiling on HP-UP has become a lot easier. Just use a recent GCC and you should be good. We are primarily an HP-UX shop and Hobbit is our primary monitoring software.

-----Original Message----- From: martin roby [mailto:stonepound at gmail.com] Sent: Monday, May 07, 2007 10:36 AM To: hobbit at hswn.dk Subject: [hobbit] hp-ux B.11 port?

Hello Everyone,

I am wondering if I can get the binaries for the hobbit client for hp-ux B.11 ?

Martin Roby

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

----- Original Message ----- From: "martin roby" <stonepound at gmail.com> To: <hobbit at hswn.dk> Sent: Tuesday, May 08, 2007 9:50 PM Subject: Re: [hobbit] hp-ux B.11 port?

I got that working, It keeps saying I'm low on memory, is that a bug? [swapinfo] Mb Mb Mb PCT START/ Mb TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME dev 8192 0 8192 0% 0 - 1 /dev/vg00/lvol2 reserve - 4886 -4886 total 8192 4886 3306 60% - 0 - [

Is the warning for physical memory or swap? HP-UX has a special memory handling. It allocates some of the physiacal memory as sawp. Named pseudoswap. Also when a process is started swapspace is reserved, (reserve above).

So I have changed MEMPHYS in hobbit-clients.cfg to: MEMPHYS 100 101 to not get any warnings.

Lars