Hi,
I am using xymon 4.3.28 and unable to disable services. I access the URL at /xymon-seccgi/enadis.sh from "Enable/disable" under the Administration menu. The page seems to load fine and I can select the hosts/tests and fill out the details below. The issue is nothing happens after clicking apply.
Regards
Can you disable from the command line?
xymon <xymon server> "disable <client>.<test> <time to disable> <message>"
So something like xymon 127.0.0.1 "disable myhost.comm -1 powered down for now"
From: Uddin, Enaze <Enaze.Uddin at experian.com> Sent: Thursday, October 10, 2019 10:09 AM To: xymon at xymon.com Subject: Enable/disable Issue
Hi,
I am using xymon 4.3.28 and unable to disable services. I access the URL at /xymon-seccgi/enadis.sh from "Enable/disable" under the Administration menu. The page seems to load fine and I can select the hosts/tests and fill out the details below. The issue is nothing happens after clicking apply.
Regards This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
Would this be through the binary located in /xymon/server/bin?
From: Root, Paul T <Paul.Root at CenturyLink.com> Sent: Thursday, October 10, 2019 11:21 AM To: Uddin, Enaze <Enaze.Uddin at experian.com>; xymon at xymon.com Subject: RE: Enable/disable Issue
Can you disable from the command line?
xymon <xymon server> "disable <client>.<test> <time to disable> <message>"
So something like xymon 127.0.0.1 "disable myhost.comm -1 powered down for now"
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 10:09 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Enable/disable Issue
Hi,
I am using xymon 4.3.28 and unable to disable services. I access the URL at /xymon-seccgi/enadis.sh from "Enable/disable" under the Administration menu. The page seems to load fine and I can select the hosts/tests and fill out the details below. The issue is nothing happens after clicking apply.
Regards This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
If that's where your xymon binaries are.
From: Uddin, Enaze <Enaze.Uddin at experian.com> Sent: Thursday, October 10, 2019 11:48 AM To: Root, Paul T <Paul.Root at CenturyLink.com>; xymon at xymon.com Subject: RE: Enable/disable Issue
Would this be through the binary located in /xymon/server/bin?
From: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>> Sent: Thursday, October 10, 2019 11:21 AM To: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Can you disable from the command line?
xymon <xymon server> "disable <client>.<test> <time to disable> <message>"
So something like xymon 127.0.0.1 "disable myhost.comm -1 powered down for now"
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 10:09 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Enable/disable Issue
Hi,
I am using xymon 4.3.28 and unable to disable services. I access the URL at /xymon-seccgi/enadis.sh from "Enable/disable" under the Administration menu. The page seems to load fine and I can select the hosts/tests and fill out the details below. The issue is nothing happens after clicking apply.
Regards This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
It did not return anything nor do I see any changes on the Enable/disable page.
From: Root, Paul T <Paul.Root at CenturyLink.com> Sent: Thursday, October 10, 2019 12:15 PM To: Uddin, Enaze <Enaze.Uddin at experian.com>; xymon at xymon.com Subject: RE: Enable/disable Issue
If that's where your xymon binaries are.
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 11:48 AM To: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Would this be through the binary located in /xymon/server/bin?
From: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>> Sent: Thursday, October 10, 2019 11:21 AM To: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Can you disable from the command line?
xymon <xymon server> "disable <client>.<test> <time to disable> <message>"
So something like xymon 127.0.0.1 "disable myhost.comm -1 powered down for now"
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 10:09 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Enable/disable Issue
Hi,
I am using xymon 4.3.28 and unable to disable services. I access the URL at /xymon-seccgi/enadis.sh from "Enable/disable" under the Administration menu. The page seems to load fine and I can select the hosts/tests and fill out the details below. The issue is nothing happens after clicking apply.
Regards This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
Look in your logs then.
From: Uddin, Enaze <Enaze.Uddin at experian.com> Sent: Thursday, October 10, 2019 12:37 PM To: Root, Paul T <Paul.Root at CenturyLink.com>; xymon at xymon.com Subject: RE: Enable/disable Issue
It did not return anything nor do I see any changes on the Enable/disable page.
From: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>> Sent: Thursday, October 10, 2019 12:15 PM To: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
If that's where your xymon binaries are.
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 11:48 AM To: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Would this be through the binary located in /xymon/server/bin?
From: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>> Sent: Thursday, October 10, 2019 11:21 AM To: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Can you disable from the command line?
xymon <xymon server> "disable <client>.<test> <time to disable> <message>"
So something like xymon 127.0.0.1 "disable myhost.comm -1 powered down for now"
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 10:09 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Enable/disable Issue
Hi,
I am using xymon 4.3.28 and unable to disable services. I access the URL at /xymon-seccgi/enadis.sh from "Enable/disable" under the Administration menu. The page seems to load fine and I can select the hosts/tests and fill out the details below. The issue is nothing happens after clicking apply.
Regards This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
Ok I tried again and I get this:
$ ./xymon 127.0.0.1 "disable xymon.comm -1 powered down for now" Unknown option -1 Xymon version 4.3.28 Usage: ./xymon [--debug] [--merge] [--proxy=http://ip.of.the.proxy:port/] RECIPIENT DATA RECIPIENT: IP-address, hostname or URL DATA: Message to send, or "-" to read from stdin
Is my syntax incorrect?
From: Root, Paul T <Paul.Root at CenturyLink.com> Sent: Thursday, October 10, 2019 1:16 PM To: Uddin, Enaze <Enaze.Uddin at experian.com>; xymon at xymon.com Subject: RE: Enable/disable Issue
Look in your logs then.
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 12:37 PM To: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
It did not return anything nor do I see any changes on the Enable/disable page.
From: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>> Sent: Thursday, October 10, 2019 12:15 PM To: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
If that's where your xymon binaries are.
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 11:48 AM To: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Would this be through the binary located in /xymon/server/bin?
From: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>> Sent: Thursday, October 10, 2019 11:21 AM To: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Can you disable from the command line?
xymon <xymon server> "disable <client>.<test> <time to disable> <message>"
So something like xymon 127.0.0.1 "disable myhost.comm -1 powered down for now"
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 10:09 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Enable/disable Issue
Hi,
I am using xymon 4.3.28 and unable to disable services. I access the URL at /xymon-seccgi/enadis.sh from "Enable/disable" under the Administration menu. The page seems to load fine and I can select the hosts/tests and fill out the details below. The issue is nothing happens after clicking apply.
Regards This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
Looks ok. Other than you copied my typo of 'comm' instead of 'conn'.
Oh, it looks like it doesn't like your double-quotes. I copied and pasted your command into mine (yes, my main server is called xymon as well - a CNAME anyway), and I got the error. It looks like you have the opening double quotes instead of a "normal" double quote
So here is a history of three command. The first failed - I copied and pasted yours and changed xymon (hostname) to wilee, and 'comm' (test) to conn.
The first command failed, the other two succeeded.
1009 xymon 127.0.0.1 "disable wilee.conn -1 powered down for now" 1010 xymon xymon "disable wilee.conn -1 powered down for now" 1011 xymon 127.0.0.1 "disable wilee.conn -1 powered down for now"
BTW, the man pages are in your GUI, under 'HELP'. All of the wonderful things you can do on the command line, and how the syntax works in all the config files. Use it, they are the very rare well written Unix man pages.
From: Uddin, Enaze <Enaze.Uddin at experian.com> Sent: Thursday, October 10, 2019 1:53 PM To: Root, Paul T <Paul.Root at CenturyLink.com>; xymon at xymon.com Subject: RE: Enable/disable Issue
Ok I tried again and I get this:
$ ./xymon 127.0.0.1 "disable xymon.comm -1 powered down for now" Unknown option -1 Xymon version 4.3.28 Usage: ./xymon [--debug] [--merge] [--proxy=https://imss91-ctp.trendmicro.com:443/wis/clicktime/v1/query?url=http%3a%2f%... RECIPIENT: IP-address, hostname or URL DATA: Message to send, or "-" to read from stdin
Is my syntax incorrect?
From: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>> Sent: Thursday, October 10, 2019 1:16 PM To: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Look in your logs then.
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 12:37 PM To: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
It did not return anything nor do I see any changes on the Enable/disable page.
From: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>> Sent: Thursday, October 10, 2019 12:15 PM To: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
If that's where your xymon binaries are.
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 11:48 AM To: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Would this be through the binary located in /xymon/server/bin?
From: Root, Paul T <Paul.Root at CenturyLink.com<mailto:Paul.Root at CenturyLink.com>> Sent: Thursday, October 10, 2019 11:21 AM To: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: RE: Enable/disable Issue
Can you disable from the command line?
xymon <xymon server> "disable <client>.<test> <time to disable> <message>"
So something like xymon 127.0.0.1 "disable myhost.comm -1 powered down for now"
From: Uddin, Enaze <Enaze.Uddin at experian.com<mailto:Enaze.Uddin at experian.com>> Sent: Thursday, October 10, 2019 10:09 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Enable/disable Issue
Hi,
I am using xymon 4.3.28 and unable to disable services. I access the URL at /xymon-seccgi/enadis.sh from "Enable/disable" under the Administration menu. The page seems to load fine and I can select the hosts/tests and fill out the details below. The issue is nothing happens after clicking apply.
Regards This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments. This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
participants (2)
-
Enaze.Uddin＠experian.com
-
Paul.Root＠CenturyLink.com