hobbit, file and bbwin question

newer
No disk and cpu status from Linux...

rmcgraw＠purdue.edu

10 Jun 2008 10 Jun '08

4:55 p.m.

Is anyone in the hobbit world using BBWin in central mode to monitor the status of a file on the Window side and reporting back to a UNIX hobbit server? If so I could really use your help.

MYSETUP

CLIENT Hostname: mailrelay.math.purdue.edu OS: Microsoft Windows Server 2003, Standard Edition Service Pack 2 (build 3790) BBWin: BBWin V.12

SERVER Hostname: zorn.math.purdue.edu OS: SunOS zorn.math.purdue.edu 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-280R

On the server I have the following two files

client-local.cfg

[mailrelay.math.purdue.edu]
file:c:\testbbwin

hobbit-clients.cfg

HOST=mailrelay.math.purdue.edu
		UP 30m
		LOAD 40.0 70.0
		DISK    * 90 95
		FILE c:\testbbwin red MTIME&lt;600

On the BBwin client my clientlocal.cfg file has

file:c:\testbbwin

file:c:\testbbwin does not seem to add any information in the msg.mailrelay file.

QUESTIONS:

I do get any information in the msg.mailrelay file about the file:c:\testbbwin. Is the code built in BBWin to capture the file: information to add to the msg.mailrelay file or is this something that I have to write?

Can you provide your files so I can see an example.

I really need to monitor a file on the Window side and this would be a great help.

I also I am not a window type guy. We run as few window machines as possible and only where necessary.

Thanks

Robert

Robert P. McGraw, Jr. Manager, Computer System EMAIL: rmcgraw at purdue.edu Purdue University ROOM: MATH-807 Department of Mathematics PHONE: (765) 494-6055 150 N. University Street
West Lafayette, IN 47907-2067

Show replies by date

AaronZink＠eharmony.com

10 Jun 10 Jun

5:44 p.m.

New subject: [hobbit] hobbit, file and bbwin question

Robert,

I too have never been able to get this to work. The BBWin 0.11 release notes say it is supposed to, but I've had no luck. My clientlocal.cfg and hobbit-client.cfg look similar to yours. I've tried slashes, doublebackslashes, quotes, etc but it always shows up as "no files monitored".

It sounds like you are one step ahead of me since your clientlocal.cfg is actually being downloaded. Mine is 1 byte on the client.

If anyone has this working, would you mind posting client-local.cfg and hobbit-client.cfg snips?

Aaron Zink Corporate IT Manager eHarmony.com 626.795.4814

-----Original Message----- From: McGraw, Robert P [mailto:rmcgraw at purdue.edu] Sent: Tuesday, June 10, 2008 09:55 To: hobbit at hswn.dk Subject: [hobbit] hobbit, file and bbwin question

Is anyone in the hobbit world using BBWin in central mode to monitor the status of a file on the Window side and reporting back to a UNIX hobbit server? If so I could really use your help.

MYSETUP

CLIENT Hostname: mailrelay.math.purdue.edu OS: Microsoft Windows Server 2003, Standard Edition Service Pack 2 (build 3790) BBWin: BBWin V.12

SERVER Hostname: zorn.math.purdue.edu OS: SunOS zorn.math.purdue.edu 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-280R

On the server I have the following two files

client-local.cfg

    [mailrelay.math.purdue.edu]
    file:c:\testbbwin

hobbit-clients.cfg

    HOST=mailrelay.math.purdue.edu
            UP 30m
            LOAD 40.0 70.0
            DISK    * 90 95
            FILE c:\testbbwin red MTIME&lt;600

On the BBwin client my clientlocal.cfg file has

    file:c:\testbbwin

file:c:\testbbwin does not seem to add any information in the msg.mailrelay file.

QUESTIONS:

Can you provide your files so I can see an example.

I really need to monitor a file on the Window side and this would be a great help.

I also I am not a window type guy. We run as few window machines as possible and only where necessary.

Thanks

Robert

Galen.Johnson＠sas.com

6:08 p.m.

New subject: [hobbit] hobbit, file and bbwin question

There were some issues with bbwin .11 in this respect. BBWin .12 is currently available and I believe there were some patches applied to make this work...Etienne can speak to that better than I.

=G=

-----Original Message----- From: Aaron Zink [mailto:AaronZink at eharmony.com] Sent: Tuesday, June 10, 2008 1:45 PM To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

Robert,

It sounds like you are one step ahead of me since your clientlocal.cfg is actually being downloaded. Mine is 1 byte on the client.

If anyone has this working, would you mind posting client-local.cfg and hobbit-client.cfg snips?

Aaron Zink Corporate IT Manager eHarmony.com 626.795.4814

-----Original Message----- From: McGraw, Robert P [mailto:rmcgraw at purdue.edu] Sent: Tuesday, June 10, 2008 09:55 To: hobbit at hswn.dk Subject: [hobbit] hobbit, file and bbwin question

Is anyone in the hobbit world using BBWin in central mode to monitor the status of a file on the Window side and reporting back to a UNIX hobbit server? If so I could really use your help.

MYSETUP

CLIENT Hostname: mailrelay.math.purdue.edu OS: Microsoft Windows Server 2003, Standard Edition Service Pack 2 (build 3790) BBWin: BBWin V.12

SERVER Hostname: zorn.math.purdue.edu OS: SunOS zorn.math.purdue.edu 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-280R

On the server I have the following two files

client-local.cfg

    [mailrelay.math.purdue.edu]
    file:c:\testbbwin

hobbit-clients.cfg

    HOST=mailrelay.math.purdue.edu
            UP 30m
            LOAD 40.0 70.0
            DISK    * 90 95
            FILE c:\testbbwin red MTIME&lt;600

On the BBwin client my clientlocal.cfg file has

    file:c:\testbbwin

file:c:\testbbwin does not seem to add any information in the msg.mailrelay file.

QUESTIONS:

Can you provide your files so I can see an example.

I really need to monitor a file on the Window side and this would be a great help.

I also I am not a window type guy. We run as few window machines as possible and only where necessary.

Thanks

Robert

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

rmcgraw＠purdue.edu

6:48 p.m.

New subject: [hobbit] hobbit, file and bbwin question

Thanks for the input

I have install Win V.12 and it acts the same way.

Thanks again.

Robert

...

-----Original Message----- From: Galen Johnson [mailto:Galen.Johnson at sas.com] Sent: Tuesday, June 10, 2008 2:08 PM To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

There were some issues with bbwin .11 in this respect. BBWin .12 is currently available and I believe there were some patches applied to make this work...Etienne can speak to that better than I.

=G=

-----Original Message----- From: Aaron Zink [mailto:AaronZink at eharmony.com] Sent: Tuesday, June 10, 2008 1:45 PM To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

Robert,

I too have never been able to get this to work. The BBWin 0.11 release notes say it is supposed to, but I've had no luck. My clientlocal.cfg and hobbit-client.cfg look similar to yours. I've tried slashes, doublebackslashes, quotes, etc but it always shows up as "no files monitored".

It sounds like you are one step ahead of me since your clientlocal.cfg is actually being downloaded. Mine is 1 byte on the client.

If anyone has this working, would you mind posting client-local.cfg and hobbit-client.cfg snips?

Aaron Zink Corporate IT Manager eHarmony.com 626.795.4814

-----Original Message----- From: McGraw, Robert P [mailto:rmcgraw at purdue.edu] Sent: Tuesday, June 10, 2008 09:55 To: hobbit at hswn.dk Subject: [hobbit] hobbit, file and bbwin question

Is anyone in the hobbit world using BBWin in central mode to monitor the status of a file on the Window side and reporting back to a UNIX hobbit server? If so I could really use your help.

MYSETUP

CLIENT Hostname: mailrelay.math.purdue.edu OS: Microsoft Windows Server 2003, Standard Edition Service Pack 2 (build 3790) BBWin: BBWin V.12

SERVER Hostname: zorn.math.purdue.edu OS: SunOS zorn.math.purdue.edu 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-280R

On the server I have the following two files

client-local.cfg
    [mailrelay.math.purdue.edu]
    file:c:\testbbwin
hobbit-clients.cfg
    HOST=mailrelay.math.purdue.edu
            UP 30m
            LOAD 40.0 70.0
            DISK    * 90 95
            FILE c:\testbbwin red MTIME&lt;600
On the BBwin client my clientlocal.cfg file has
    file:c:\testbbwin
file:c:\testbbwin does not seem to add any information in the msg.mailrelay file.

QUESTIONS:

I do get any information in the msg.mailrelay file about the file:c:\testbbwin. Is the code built in BBWin to capture the file: information to add to the msg.mailrelay file or is this something that I have to write?

Can you provide your files so I can see an example.

I really need to monitor a file on the Window side and this would be a great help.

I also I am not a window type guy. We run as few window machines as possible and only where necessary.

Thanks

Robert

Robert P. McGraw, Jr. Manager, Computer System EMAIL: rmcgraw at purdue.edu Purdue University ROOM: MATH-807 Department of Mathematics PHONE: (765) 494-6055 150 N. University Street West Lafayette, IN 47907-2067

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

AaronZink＠eharmony.com

7:04 p.m.

New subject: [hobbit] hobbit, file and bbwin question

Thanks Galen, but I am also seeing the same result with BBWin 0.12. The downloaded clientlocal.cfg is still 1 byte and files aren't being checked.

FYI, filesystem.dll is loaded. BBWin.log with extended debugging looks normal:

2008/06/10 12:03:03 [DEBUG]: [cpu]: initialization cpu agent started 2008/06/10 12:03:03 [DEBUG]: [cpu]: initialization cpu agent ended 2008/06/10 12:03:03 [DEBUG]: [disk]: init disk agent AgentDisk::Init 2008/06/10 12:03:03 [INFO]: [filesystem]: failed to save logfetch status C:\Program Files\BBWin\tmp\logfetch.status : The system cannot find the file specified. 2008/06/10 12:03:03 [DEBUG]: [msgs]: Begin Msgs Initialization AgentMsgs::Init 2008/06/10 12:03:03 [DEBUG]: [msgs]: Ending Msgs Initialization 2008/06/10 12:03:03 [DEBUG]: Starting hobbit client agent. 2008/06/10 12:03:03 [INFO]: bbwin is started. 2008/06/10 12:03:03 [DEBUG]: [cpu]: cpu review started 2008/06/10 12:03:04 [DEBUG]: [cpu]: cpu review ended 2008/06/10 12:03:04 [DEBUG]: [disk]: drive string C:
2008/06/10 12:03:04 [DEBUG]: [disk]: drive string D:
2008/06/10 12:03:04 [DEBUG]: [filesystem]: start AgentFileSystem::InitCentralMode 2008/06/10 12:03:04 [DEBUG]: [filesystem]: checking file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:04 [DEBUG]: [filesystem]: reading file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:04 [DEBUG]: [msgs]: start AgentMsgs::InitCentralMode 2008/06/10 12:03:04 [DEBUG]: [msgs]: checking file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:04 [DEBUG]: [msgs]: reading file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:06 [DEBUG]: [svcs]: start AgentSvcs::InitCentralMode 2008/06/10 12:03:06 [DEBUG]: [svcs]: checking file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:06 [DEBUG]: [svcs]: reading file C:\Program Files\BBWin\tmp\clientlocal.cfg

Aaron Zink

-----Original Message----- From: McGraw, Robert P [mailto:rmcgraw at purdue.edu] Sent: Tuesday, June 10, 2008 11:48 To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

Thanks for the input

I have install Win V.12 and it acts the same way.

Thanks again.

Robert

...

-----Original Message----- From: Galen Johnson [mailto:Galen.Johnson at sas.com] Sent: Tuesday, June 10, 2008 2:08 PM To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

There were some issues with bbwin .11 in this respect. BBWin .12 is currently available and I believe there were some patches applied to make this work...Etienne can speak to that better than I.

=G=

-----Original Message----- From: Aaron Zink [mailto:AaronZink at eharmony.com] Sent: Tuesday, June 10, 2008 1:45 PM To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

Robert,

I too have never been able to get this to work. The BBWin 0.11 release notes say it is supposed to, but I've had no luck. My clientlocal.cfg and hobbit-client.cfg look similar to yours. I've tried slashes, doublebackslashes, quotes, etc but it always shows up as "no files monitored".

It sounds like you are one step ahead of me since your clientlocal.cfg is actually being downloaded. Mine is 1 byte on the client.

If anyone has this working, would you mind posting client-local.cfg and hobbit-client.cfg snips?

Aaron Zink Corporate IT Manager eHarmony.com 626.795.4814

-----Original Message----- From: McGraw, Robert P [mailto:rmcgraw at purdue.edu] Sent: Tuesday, June 10, 2008 09:55 To: hobbit at hswn.dk Subject: [hobbit] hobbit, file and bbwin question

Is anyone in the hobbit world using BBWin in central mode to monitor the status of a file on the Window side and reporting back to a UNIX hobbit server? If so I could really use your help.

MYSETUP

CLIENT Hostname: mailrelay.math.purdue.edu OS: Microsoft Windows Server 2003, Standard Edition Service Pack 2 (build 3790) BBWin: BBWin V.12

SERVER Hostname: zorn.math.purdue.edu OS: SunOS zorn.math.purdue.edu 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-280R

On the server I have the following two files

client-local.cfg
    [mailrelay.math.purdue.edu]
    file:c:\testbbwin
hobbit-clients.cfg
    HOST=mailrelay.math.purdue.edu
            UP 30m
            LOAD 40.0 70.0
            DISK    * 90 95
            FILE c:\testbbwin red MTIME&lt;600
On the BBwin client my clientlocal.cfg file has
    file:c:\testbbwin
file:c:\testbbwin does not seem to add any information in the msg.mailrelay file.

QUESTIONS:

I do get any information in the msg.mailrelay file about the file:c:\testbbwin. Is the code built in BBWin to capture the file: information to add to the msg.mailrelay file or is this something that I have to write?

Can you provide your files so I can see an example.

I really need to monitor a file on the Window side and this would be a great help.

I also I am not a window type guy. We run as few window machines as possible and only where necessary.

Thanks

Robert

Robert P. McGraw, Jr. Manager, Computer System EMAIL: rmcgraw at purdue.edu Purdue University ROOM: MATH-807 Department of Mathematics PHONE: (765) 494-6055 150 N. University Street West Lafayette, IN 47907-2067

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

rmcgraw＠purdue.edu

7:26 p.m.

New subject: [hobbit] hobbit, file and bbwin question

After thinking about this I also had the same problem where the clientlocal.cfg had nothing in the file.

The problem was the order of the entries in the client-local.cfg file.

I had put my hostname specific entry after the OS [win32] entry and that did not work. [win32] is blank and so the blank clientlocal.cfg file

mailrelay.math.purdue.edu is my Win host and so now I have

[mailrelay.math.purdue.edu]
file:c:\testbbwin

before

[win32]

...

From the client-local.cfg on the server it say:

# The client-local.cfg file contains configuration for
# the Hobbit clients running on monitored systems. When
# clients contact the Hobbit server, they get the section
# from this file which matches their hostname or operating
# system

The key word is "or" in the forth line "hostname or operating". I believe what it matches first is what will get used and searching stops or at least that is what I saw.

Hope this helps

Robert

...

-----Original Message----- From: Aaron Zink [mailto:AaronZink at eharmony.com] Sent: Tuesday, June 10, 2008 3:05 PM To: hobbit at hswn.dk Subject: RE: RE: [hobbit] hobbit, file and bbwin question

Thanks Galen, but I am also seeing the same result with BBWin 0.12. The downloaded clientlocal.cfg is still 1 byte and files aren't being checked.

FYI, filesystem.dll is loaded. BBWin.log with extended debugging looks normal:

2008/06/10 12:03:03 [DEBUG]: [cpu]: initialization cpu agent started 2008/06/10 12:03:03 [DEBUG]: [cpu]: initialization cpu agent ended 2008/06/10 12:03:03 [DEBUG]: [disk]: init disk agent AgentDisk::Init 2008/06/10 12:03:03 [INFO]: [filesystem]: failed to save logfetch status C:\Program Files\BBWin\tmp\logfetch.status : The system cannot find the file specified. 2008/06/10 12:03:03 [DEBUG]: [msgs]: Begin Msgs Initialization AgentMsgs::Init 2008/06/10 12:03:03 [DEBUG]: [msgs]: Ending Msgs Initialization 2008/06/10 12:03:03 [DEBUG]: Starting hobbit client agent. 2008/06/10 12:03:03 [INFO]: bbwin is started. 2008/06/10 12:03:03 [DEBUG]: [cpu]: cpu review started 2008/06/10 12:03:04 [DEBUG]: [cpu]: cpu review ended 2008/06/10 12:03:04 [DEBUG]: [disk]: drive string C:
2008/06/10 12:03:04 [DEBUG]: [disk]: drive string D:
2008/06/10 12:03:04 [DEBUG]: [filesystem]: start AgentFileSystem::InitCentralMode 2008/06/10 12:03:04 [DEBUG]: [filesystem]: checking file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:04 [DEBUG]: [filesystem]: reading file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:04 [DEBUG]: [msgs]: start AgentMsgs::InitCentralMode 2008/06/10 12:03:04 [DEBUG]: [msgs]: checking file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:04 [DEBUG]: [msgs]: reading file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:06 [DEBUG]: [svcs]: start AgentSvcs::InitCentralMode 2008/06/10 12:03:06 [DEBUG]: [svcs]: checking file C:\Program Files\BBWin\tmp\clientlocal.cfg 2008/06/10 12:03:06 [DEBUG]: [svcs]: reading file C:\Program Files\BBWin\tmp\clientlocal.cfg

Aaron Zink

-----Original Message----- From: McGraw, Robert P [mailto:rmcgraw at purdue.edu] Sent: Tuesday, June 10, 2008 11:48 To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

Thanks for the input

I have install Win V.12 and it acts the same way.

Thanks again.

Robert

...
-----Original Message----- From: Galen Johnson [mailto:Galen.Johnson at sas.com] Sent: Tuesday, June 10, 2008 2:08 PM To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

There were some issues with bbwin .11 in this respect. BBWin .12 is currently available and I believe there were some patches applied to make this work...Etienne can speak to that better than I.

=G=

-----Original Message----- From: Aaron Zink [mailto:AaronZink at eharmony.com] Sent: Tuesday, June 10, 2008 1:45 PM To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

Robert,

I too have never been able to get this to work. The BBWin 0.11 release notes say it is supposed to, but I've had no luck. My clientlocal.cfg and hobbit-client.cfg look similar to yours. I've tried slashes, doublebackslashes, quotes, etc but it always shows up as "no files monitored".

It sounds like you are one step ahead of me since your clientlocal.cfg is actually being downloaded. Mine is 1 byte on the client.

If anyone has this working, would you mind posting client-local.cfg and hobbit-client.cfg snips?

Aaron Zink Corporate IT Manager eHarmony.com 626.795.4814

-----Original Message----- From: McGraw, Robert P [mailto:rmcgraw at purdue.edu] Sent: Tuesday, June 10, 2008 09:55 To: hobbit at hswn.dk Subject: [hobbit] hobbit, file and bbwin question

Is anyone in the hobbit world using BBWin in central mode to monitor the status of a file on the Window side and reporting back to a UNIX hobbit server? If so I could really use your help.

MYSETUP

CLIENT Hostname: mailrelay.math.purdue.edu OS: Microsoft Windows Server 2003, Standard Edition Service Pack 2 (build 3790) BBWin: BBWin V.12

SERVER Hostname: zorn.math.purdue.edu OS: SunOS zorn.math.purdue.edu 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-280R

On the server I have the following two files

client-local.cfg
    [mailrelay.math.purdue.edu]
    file:c:\testbbwin
hobbit-clients.cfg
    HOST=mailrelay.math.purdue.edu
            UP 30m
            LOAD 40.0 70.0
            DISK    * 90 95
            FILE c:\testbbwin red MTIME&lt;600
On the BBwin client my clientlocal.cfg file has
    file:c:\testbbwin
file:c:\testbbwin does not seem to add any information in the msg.mailrelay file.

QUESTIONS:

I do get any information in the msg.mailrelay file about the file:c:\testbbwin. Is the code built in BBWin to capture the file: information to add to the msg.mailrelay file or is this something that I have to write?

Can you provide your files so I can see an example.

I really need to monitor a file on the Window side and this would be a great help.

I also I am not a window type guy. We run as few window machines as possible and only where necessary.

Thanks

Robert

Robert P. McGraw, Jr. Manager, Computer System EMAIL: rmcgraw at purdue.edu Purdue University ROOM: MATH-807 Department of Mathematics PHONE: (765) 494-6055 150 N. University Street West Lafayette, IN 47907-2067

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

rmcgraw＠purdue.edu

6:51 p.m.

New subject: [hobbit] hobbit, file and bbwin question

Aaron,

Thanks for you input.

Have installed BBWin V.12 and it behaves the same way.

I have sent this in to the BBwin mail list but had not hear back and so I want to ask others their experience.

I just did not want to be fighting windmills.

Thanks again

Robert

...

-----Original Message----- From: Aaron Zink [mailto:AaronZink at eharmony.com] Sent: Tuesday, June 10, 2008 1:45 PM To: hobbit at hswn.dk Subject: RE: [hobbit] hobbit, file and bbwin question

Robert,

I too have never been able to get this to work. The BBWin 0.11 release notes say it is supposed to, but I've had no luck. My clientlocal.cfg and hobbit-client.cfg look similar to yours. I've tried slashes, doublebackslashes, quotes, etc but it always shows up as "no files monitored".

It sounds like you are one step ahead of me since your clientlocal.cfg is actually being downloaded. Mine is 1 byte on the client.

If anyone has this working, would you mind posting client-local.cfg and hobbit-client.cfg snips?

Aaron Zink Corporate IT Manager eHarmony.com 626.795.4814

-----Original Message----- From: McGraw, Robert P [mailto:rmcgraw at purdue.edu] Sent: Tuesday, June 10, 2008 09:55 To: hobbit at hswn.dk Subject: [hobbit] hobbit, file and bbwin question

Is anyone in the hobbit world using BBWin in central mode to monitor the status of a file on the Window side and reporting back to a UNIX hobbit server? If so I could really use your help.

MYSETUP

CLIENT Hostname: mailrelay.math.purdue.edu OS: Microsoft Windows Server 2003, Standard Edition Service Pack 2 (build 3790) BBWin: BBWin V.12

SERVER Hostname: zorn.math.purdue.edu OS: SunOS zorn.math.purdue.edu 5.10 Generic_120011-14 sun4u sparc SUNW,Sun-Fire-280R

On the server I have the following two files

client-local.cfg
    [mailrelay.math.purdue.edu]
    file:c:\testbbwin
hobbit-clients.cfg
    HOST=mailrelay.math.purdue.edu
            UP 30m
            LOAD 40.0 70.0
            DISK    * 90 95
            FILE c:\testbbwin red MTIME&lt;600
On the BBwin client my clientlocal.cfg file has
    file:c:\testbbwin
file:c:\testbbwin does not seem to add any information in the msg.mailrelay file.

QUESTIONS:

I do get any information in the msg.mailrelay file about the file:c:\testbbwin. Is the code built in BBWin to capture the file: information to add to the msg.mailrelay file or is this something that I have to write?

Can you provide your files so I can see an example.

I really need to monitor a file on the Window side and this would be a great help.

I also I am not a window type guy. We run as few window machines as possible and only where necessary.

Thanks

Robert

Robert P. McGraw, Jr. Manager, Computer System EMAIL: rmcgraw at purdue.edu Purdue University ROOM: MATH-807 Department of Mathematics PHONE: (765) 494-6055 150 N. University Street West Lafayette, IN 47907-2067

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

6588

Age (days ago)

6588

Last active (days ago)

List overview

Download

6 comments

3 participants

participants (3)

AaronZink＠eharmony.com
Galen.Johnson＠sas.com
rmcgraw＠purdue.edu