how to see graphs for last week/month for perticular test ?snapshot report
hi, i have 2 problems.. 1)i want to see last month cpu utilization graph for the perticular host,how can i see that? 2)when i want to see snapshot report for say date 2dec09 7:30am,front pages(bb-html etc) shows time stamp of 2dec09 7:0am,but when i click to see status of perticular test of perticular host,it shows me status of 29oct09 12:40pm.how to overcome it?
-- Pankaj V. Dorlikar
On Thursday, 3 December 2009 02:41:03 pankaj dorlikar wrote:
hi, i have 2 problems.. 1)i want to see last month cpu utilization graph for the perticular host,how can i see that?
Use "Metrics Report".
2)when i want to see snapshot report for say date 2dec09 7:30am,front pages(bb-html etc) shows time stamp of 2dec09 7:0am,but when i click to see status of perticular test of perticular host,it shows me status of 29oct09 12:40pm.how to overcome it?
By default, Xymon only keeps the full status when the status changes colour. You can validate that by clicking the history button, and you should see that the test colour changed on 29 Oct, and has been the same colour since then until 2 Dec.
Enabling the bbstatus task in hobbitlaunch.cfg will make it keep all status messages, but I am not sure if this will affect the snapshot report ...
Regards, Buchan
I thought you could just add extra rrdtool graph commandline parameters to the hobbitgraph file for a graph section and hey presto it would use them. This seems to work for some and not for others. (eg -e and -A work)
It may be a more generic issue related to parameter assumptions within the code, but anyway, I added a some code to handle a couple of additional directives in hobbitgraph.cfg. (RSCALE, RFORMAT and RLABEL - in order to add a different scale to the right hand y axis.)
Should I look deeper into the code and see why --right-axis scale:shift, --right-axis-format and --right-axis-label seem to get ignored if I add them to hobbitgraph.cfg.
Or should I just use the code that I now have that uses my Hobbit specific directives.
Or am I missing something entirely altogether?
Hang on a sec....
Debugging shows that there is a special case for -l and -u where it picks up two tokens on the same line (ie -l 0). The default case is that hobbitgraph.c expects parameters to be separated on word per line:
--right-axis 10:-1000
Or
-c
CANVAS:#449900
Hmmm that seems a bit counterintuitive as it is almost like rrdtool but not quite, which can be confusing.
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: Sunday, 6 December 2009 5:11 PM To: hobbit at hswn.dk Subject: [hobbit] Extra graph parameters.
I thought you could just add extra rrdtool graph commandline parameters to the hobbitgraph file for a graph section and hey presto it would use them. This seems to work for some and not for others. (eg -e and -A work)
It may be a more generic issue related to parameter assumptions within the code, but anyway, I added a some code to handle a couple of additional directives in hobbitgraph.cfg. (RSCALE, RFORMAT and RLABEL - in order to add a different scale to the right hand y axis.)
Should I look deeper into the code and see why --right-axis scale:shift, --right-axis-format and --right-axis-label seem to get ignored if I add them to hobbitgraph.cfg.
Or should I just use the code that I now have that uses my Hobbit specific directives.
Or am I missing something entirely altogether?
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Hi,
Has anyone got a right-axis working in Xymon graphs? The nearest info I can find is the post below, but I still can't get it to work seperating --right-axis from the parameter with a line-break. Does anyone have a working example? If I put --right-axis in the graphs.cfg, it just does not display it.
Many thanks,
SebA
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: 06 December 2009 06:49 To: hobbit at hswn.dk Subject: RE: [hobbit] Extra graph parameters.
Hang on a sec....
Debugging shows that there is a special case for -l and -u where it picks up two tokens on the same line (ie -l 0). The default case is that hobbitgraph.c expects parameters to be separated on word per line:
--right-axis 10:-1000
Or
-c
CANVAS:#449900
Hmmm that seems a bit counterintuitive as it is almost like rrdtool but not quite, which can be confusing.
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: Sunday, 6 December 2009 5:11 PM To: hobbit at hswn.dk Subject: [hobbit] Extra graph parameters.
I thought you could just add extra rrdtool graph commandline parameters to the hobbitgraph file for a graph section and hey presto it would use them. This seems to work for some and not for others. (eg -e and -A work)
It may be a more generic issue related to parameter assumptions within the code, but anyway, I added a some code to handle a couple of additional directives in hobbitgraph.cfg. (RSCALE, RFORMAT and RLABEL - in order to add a different scale to the right hand y axis.)
Should I look deeper into the code and see why --right-axis scale:shift, --right-axis-format and --right-axis-label seem to get ignored if I add them to hobbitgraph.cfg.
Or should I just use the code that I now have that uses my Hobbit specific directives.
Or am I missing something entirely altogether?
I just tried it on a random temperature graph, and it seems to work as two lines:
--right-axis
10:-1000That definitely put an axis on the right side of the graph.
To set it up as a single line in graphs.cfg, you'll need to do some work on xymon-4.3.7/web/showgraph.c. Starting at line 1068, you can see how other options work, such as --title, height, width, upperlimit & lowerlimit. I think you'd need to add something to the gdef_t struct and some handling in load_gdefs at line 314. Dunno what else.
But that's just a wild guess... :-)
Ralph Mitchell
On Thu, Jun 7, 2012 at 12:05 PM, SebA <spah at syntec.co.uk> wrote:
Hi,
Has anyone got a right-axis working in Xymon graphs? The nearest info I can find is the post below, but I still can't get it to work seperating --right-axis from the parameter with a line-break. Does anyone have a working example? If I put --right-axis in the graphs.cfg, it just does not display it.
Many thanks,
SebA
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: 06 December 2009 06:49 To: hobbit at hswn.dk Subject: RE: [hobbit] Extra graph parameters.
Hang on a sec....
Debugging shows that there is a special case for -l and -u where it picks up two tokens on the same line (ie -l 0). The default case is that hobbitgraph.c expects parameters to be separated on word per line:
--right-axis 10:-1000
Or
-c
CANVAS:#449900
Hmmm that seems a bit counterintuitive as it is almost like rrdtool but not quite, which can be confusing.
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: Sunday, 6 December 2009 5:11 PM To: hobbit at hswn.dk Subject: [hobbit] Extra graph parameters.
I thought you could just add extra rrdtool graph commandline parameters to the hobbitgraph file for a graph section and hey presto it would use them. This seems to work for some and not for others. (eg -e and -A work)
It may be a more generic issue related to parameter assumptions within the code, but anyway, I added a some code to handle a couple of additional directives in hobbitgraph.cfg. (RSCALE, RFORMAT and RLABEL - in order to add a different scale to the right hand y axis.)
Should I look deeper into the code and see why --right-axis scale:shift, --right-axis-format and --right-axis-label seem to get ignored if I add them to hobbitgraph.cfg.
Or should I just use the code that I now have that uses my Hobbit specific directives.
Or am I missing something entirely altogether?
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Hi Ralph,
I tried it on the la (default CPU) graph (in various positions) and it does not work for me on Xymon 4.3.7. My rrd version is old but it does support right-axis. Can you share the entire graphs.cfg entry you have working (or preferably using one of the default graphs)?
I'm not quite sure what you mean by 'To set it up as a single line in graphs.cfg'... There's more to it than adding an axis and a label?
Kind regards,
SebA
From: Ralph Mitchell [mailto:ralphmitchell at gmail.com] Sent: 07 June 2012 19:40 To: SebA Cc: xymon at xymon.com Subject: Re: [Xymon] Graph right-axis in Xymon
I just tried it on a random temperature graph, and it seems to work as two lines:
--right-axis
10:-1000That definitely put an axis on the right side of the graph.
To set it up as a single line in graphs.cfg, you'll need to do some work on xymon-4.3.7/web/showgraph.c. Starting at line 1068, you can see how other options work, such as --title, height, width, upperlimit & lowerlimit. I think you'd need to add something to the gdef_t struct and some handling in load_gdefs at line 314. Dunno what else.
But that's just a wild guess... :-)
Ralph Mitchell
On Thu, Jun 7, 2012 at 12:05 PM, SebA <spah at syntec.co.uk> wrote:
Hi,
Has anyone got a right-axis working in Xymon graphs? The nearest info I can find is the post below, but I still can't get it to work seperating --right-axis from the parameter with a line-break. Does anyone have a working example? If I put --right-axis in the graphs.cfg, it just does not display it.
Many thanks,
SebA
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: 06 December 2009 06:49 To: hobbit at hswn.dk Subject: RE: [hobbit] Extra graph parameters.
Hang on a sec....
Debugging shows that there is a special case for -l and -u where it picks up two tokens on the same line (ie -l 0). The default case is that hobbitgraph.c expects parameters to be separated on word per line:
--right-axis 10:-1000
Or
-c
CANVAS:#449900
Hmmm that seems a bit counterintuitive as it is almost like rrdtool but not quite, which can be confusing.
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: Sunday, 6 December 2009 5:11 PM To: hobbit at hswn.dk Subject: [hobbit] Extra graph parameters.
I thought you could just add extra rrdtool graph commandline parameters to the hobbitgraph file for a graph section and hey presto it would use them. This seems to work for some and not for others. (eg -e and -A work)
It may be a more generic issue related to parameter assumptions within the code, but anyway, I added a some code to handle a couple of additional directives in hobbitgraph.cfg. (RSCALE, RFORMAT and RLABEL - in order to add a different scale to the right hand y axis.)
Should I look deeper into the code and see why --right-axis scale:shift, --right-axis-format and --right-axis-label seem to get ignored if I add them to hobbitgraph.cfg.
Or should I just use the code that I now have that uses my Hobbit specific directives.
Or am I missing something entirely altogether?
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
I don't have a working example handy where I could do a screenshot, but on my system at work I just modified the [la] entry with extra lines like this:
AREA:la#00CC00:CPU Load Average
-u 1.0
--right-axis
1:0
--right-axis-label
Load
GPRINT:la:LAST: \: %5.1lf (cur)and that gives me markers and a label on the right axis of the cpu graphs.
What I meant by "set it up as a single line" was to make it look similar the -u & -l options:
--right-axis 1:0
--right-axis-label LoadThat will require some code additions, as noted in my earlier email.
This is working in SLES11, with rrdtool-1.3.7
Ralph Mitchell
On Fri, Jun 8, 2012 at 8:12 AM, SebA <spah at syntec.co.uk> wrote:
** Hi Ralph,
I tried it on the la (default CPU) graph (in various positions) and it does not work for me on Xymon 4.3.7. My rrd version is old but it does support right-axis. Can you share the entire graphs.cfg entry you have working (or preferably using one of the default graphs)?
I'm not quite sure what you mean by 'To set it up as a single line in graphs.cfg'... There's more to it than adding an axis and a label?
Kind regards,
SebA
*From:* Ralph Mitchell [mailto:ralphmitchell at gmail.com] *Sent:* 07 June 2012 19:40 *To:* SebA *Cc:* xymon at xymon.com *Subject:* Re: [Xymon] Graph right-axis in Xymon
I just tried it on a random temperature graph, and it seems to work as two lines:
--right-axis 10:-1000That definitely put an axis on the right side of the graph.
To set it up as a single line in graphs.cfg, you'll need to do some work on xymon-4.3.7/web/showgraph.c. Starting at line 1068, you can see how other options work, such as --title, height, width, upperlimit & lowerlimit. I think you'd need to add something to the gdef_t struct and some handling in load_gdefs at line 314. Dunno what else.
But that's just a wild guess... :-)
Ralph Mitchell
On Thu, Jun 7, 2012 at 12:05 PM, SebA <spah at syntec.co.uk> wrote:
Hi,
Has anyone got a right-axis working in Xymon graphs? The nearest info I can find is the post below, but I still can't get it to work seperating --right-axis from the parameter with a line-break. Does anyone have a working example? If I put --right-axis in the graphs.cfg, it just does not display it.
Many thanks,
SebA
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: 06 December 2009 06:49 To: hobbit at hswn.dk Subject: RE: [hobbit] Extra graph parameters.
Hang on a sec....
Debugging shows that there is a special case for -l and -u where it picks up two tokens on the same line (ie -l 0). The default case is that hobbitgraph.c expects parameters to be separated on word per line:
--right-axis 10:-1000
Or
-c
CANVAS:#449900
Hmmm that seems a bit counterintuitive as it is almost like rrdtool but not quite, which can be confusing.
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: Sunday, 6 December 2009 5:11 PM To: hobbit at hswn.dk Subject: [hobbit] Extra graph parameters.
I thought you could just add extra rrdtool graph commandline parameters to the hobbitgraph file for a graph section and hey presto it would use them. This seems to work for some and not for others. (eg -e and -A work)
It may be a more generic issue related to parameter assumptions within the code, but anyway, I added a some code to handle a couple of additional directives in hobbitgraph.cfg. (RSCALE, RFORMAT and RLABEL - in order to add a different scale to the right hand y axis.)
Should I look deeper into the code and see why --right-axis scale:shift, --right-axis-format and --right-axis-label seem to get ignored if I add them to hobbitgraph.cfg.
Or should I just use the code that I now have that uses my Hobbit specific directives.
Or am I missing something entirely altogether?
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Hi Ralph,
So I tried your example and it didn't work for me. I therefore concluded there was a problem with my rrdtool. It turns out that the version used by xymon was not the version I thought - it was an even older one I had compiled way back when, rather than the newer version installed by yum. The older version didn't support the right-axis options! Doh! So I removed the compiled version, yum installed rrdtool-devel (which was missing) and reconfigured and recompiled xymon. Now right-axis works! (In multi-line format.)
I'm not too worried about getting it working in single-line format, but thanks so much for all the help! I would probably have given up without you assuring me it could work.
Kind regards,
SebA
From: Ralph Mitchell [mailto:ralphmitchell at gmail.com] Sent: 08 June 2012 18:06 To: SebA Cc: xymon at xymon.com Subject: Re: [Xymon] Graph right-axis in Xymon
I don't have a working example handy where I could do a screenshot, but on my system at work I just modified the [la] entry with extra lines like this:
AREA:la#00CC00:CPU Load Average
-u 1.0
--right-axis
1:0
--right-axis-label
Load
GPRINT:la:LAST: \: %5.1lf (cur)and that gives me markers and a label on the right axis of the cpu graphs.
What I meant by "set it up as a single line" was to make it look similar the -u & -l options:
--right-axis 1:0
--right-axis-label LoadThat will require some code additions, as noted in my earlier email.
This is working in SLES11, with rrdtool-1.3.7
Ralph Mitchell
On Fri, Jun 8, 2012 at 8:12 AM, SebA <spah at syntec.co.uk> wrote:
Hi Ralph,
I tried it on the la (default CPU) graph (in various positions) and it does not work for me on Xymon 4.3.7. My rrd version is old but it does support right-axis. Can you share the entire graphs.cfg entry you have working (or preferably using one of the default graphs)?
I'm not quite sure what you mean by 'To set it up as a single line in graphs.cfg'... There's more to it than adding an axis and a label?
Kind regards,
SebA
From: Ralph Mitchell [mailto:ralphmitchell at gmail.com] Sent: 07 June 2012 19:40 To: SebA Cc: xymon at xymon.com Subject: Re: [Xymon] Graph right-axis in Xymon
I just tried it on a random temperature graph, and it seems to work as two lines:
--right-axis
10:-1000That definitely put an axis on the right side of the graph.
To set it up as a single line in graphs.cfg, you'll need to do some work on xymon-4.3.7/web/showgraph.c. Starting at line 1068, you can see how other options work, such as --title, height, width, upperlimit & lowerlimit. I think you'd need to add something to the gdef_t struct and some handling in load_gdefs at line 314. Dunno what else.
But that's just a wild guess... :-)
Ralph Mitchell
On Thu, Jun 7, 2012 at 12:05 PM, SebA <spah at syntec.co.uk> wrote:
Hi,
Has anyone got a right-axis working in Xymon graphs? The nearest info I can find is the post below, but I still can't get it to work seperating --right-axis from the parameter with a line-break. Does anyone have a working example? If I put --right-axis in the graphs.cfg, it just does not display it.
Many thanks,
SebA
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: 06 December 2009 06:49 To: hobbit at hswn.dk Subject: RE: [hobbit] Extra graph parameters.
Hang on a sec....
Debugging shows that there is a special case for -l and -u where it picks up two tokens on the same line (ie -l 0). The default case is that hobbitgraph.c expects parameters to be separated on word per line:
--right-axis 10:-1000
Or
-c
CANVAS:#449900
Hmmm that seems a bit counterintuitive as it is almost like rrdtool but not quite, which can be confusing.
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: Sunday, 6 December 2009 5:11 PM To: hobbit at hswn.dk Subject: [hobbit] Extra graph parameters.
I thought you could just add extra rrdtool graph commandline parameters to the hobbitgraph file for a graph section and hey presto it would use them. This seems to work for some and not for others. (eg -e and -A work)
It may be a more generic issue related to parameter assumptions within the code, but anyway, I added a some code to handle a couple of additional directives in hobbitgraph.cfg. (RSCALE, RFORMAT and RLABEL - in order to add a different scale to the right hand y axis.)
Should I look deeper into the code and see why --right-axis scale:shift, --right-axis-format and --right-axis-label seem to get ignored if I add them to hobbitgraph.cfg.
Or should I just use the code that I now have that uses my Hobbit specific directives.
Or am I missing something entirely altogether?
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Excellent! I wondered if it might be rrdtool, which is why I posted OS and rrdtool version
Ralph Mitchell On Jun 11, 2012 10:33 AM, "SebA" <spah at syntec.co.uk> wrote:
Hi Ralph,
So I tried your example and it didn't work for me. I therefore concluded
there was a problem with my rrdtool. It turns out that the version used by xymon was not the version I thought - it was an even older one I had compiled way back when, rather than the newer version installed by yum. The older version didn't support the right-axis options! Doh! So I removed the compiled version, yum installed rrdtool-devel (which was missing) and reconfigured and recompiled xymon. Now right-axis works! (In multi-line format.)
I'm not too worried about getting it working in single-line format, but
thanks so much for all the help! I would probably have given up without you assuring me it could work.
Kind regards,
SebA
From: Ralph Mitchell [mailto:ralphmitchell at gmail.com] Sent: 08 June 2012 18:06
To: SebA Cc: xymon at xymon.com Subject: Re: [Xymon] Graph right-axis in Xymon
I don't have a working example handy where I could do a screenshot, but
on my system at work I just modified the [la] entry with extra lines like this:
AREA:la#00CC00:CPU Load Average -u 1.0 --right-axis 1:0 --right-axis-label Load GPRINT:la:LAST: \: %5.1lf (cur)and that gives me markers and a label on the right axis of the cpu
graphs.
What I meant by "set it up as a single line" was to make it look similar
the -u & -l options:
--right-axis 1:0 --right-axis-label LoadThat will require some code additions, as noted in my earlier email.
This is working in SLES11, with rrdtool-1.3.7
Ralph Mitchell
On Fri, Jun 8, 2012 at 8:12 AM, SebA <spah at syntec.co.uk> wrote:
Hi Ralph,
I tried it on the la (default CPU) graph (in various positions) and it
does not work for me on Xymon 4.3.7. My rrd version is old but it does support right-axis. Can you share the entire graphs.cfg entry you have working (or preferably using one of the default graphs)?
I'm not quite sure what you mean by 'To set it up as a single line in
graphs.cfg'... There's more to it than adding an axis and a label?
Kind regards,
SebA
From: Ralph Mitchell [mailto:ralphmitchell at gmail.com] Sent: 07 June 2012 19:40 To: SebA Cc: xymon at xymon.com Subject: Re: [Xymon] Graph right-axis in Xymon
I just tried it on a random temperature graph, and it seems to work as
two lines:
--right-axis 10:-1000That definitely put an axis on the right side of the graph.
To set it up as a single line in graphs.cfg, you'll need to do some
work on xymon-4.3.7/web/showgraph.c. Starting at line 1068, you can see how other options work, such as --title, height, width, upperlimit & lowerlimit. I think you'd need to add something to the gdef_t struct and some handling in load_gdefs at line 314. Dunno what else.
But that's just a wild guess... :-)
Ralph Mitchell
On Thu, Jun 7, 2012 at 12:05 PM, SebA <spah at syntec.co.uk> wrote:
Hi,
Has anyone got a right-axis working in Xymon graphs? The nearest
info I can
find is the post below, but I still can't get it to work seperating --right-axis from the parameter with a line-break. Does anyone have a working example? If I put --right-axis in the graphs.cfg, it just does not display it.
Many thanks,
SebA
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: 06 December 2009 06:49 To: hobbit at hswn.dk Subject: RE: [hobbit] Extra graph parameters.
Hang on a sec....
Debugging shows that there is a special case for -l and -u where it picks up two tokens on the same line (ie -l 0). The default case is that hobbitgraph.c expects parameters to be separated on word per line:
--right-axis 10:-1000
Or
-c
CANVAS:#449900
Hmmm that seems a bit counterintuitive as it is almost like rrdtool but not quite, which can be confusing.
-----Original Message----- From: David Peters [mailto:davidp at electronf.com] Sent: Sunday, 6 December 2009 5:11 PM To: hobbit at hswn.dk Subject: [hobbit] Extra graph parameters.
I thought you could just add extra rrdtool graph commandline parameters to the hobbitgraph file for a graph section and hey presto it would use them. This seems to work for some and not for others. (eg -e and -A work)
It may be a more generic issue related to parameter assumptions within the code, but anyway, I added a some code to handle a couple of additional directives in hobbitgraph.cfg. (RSCALE, RFORMAT and RLABEL - in order to add a different scale to the right hand y axis.)
Should I look deeper into the code and see why --right-axis scale:shift, --right-axis-format and --right-axis-label seem to get ignored if I add them to hobbitgraph.cfg.
Or should I just use the code that I now have that uses my Hobbit specific directives.
Or am I missing something entirely altogether?
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
participants (5)
-
bgmilne＠staff.telkomsa.net
-
davidp＠electronf.com
-
pankaj.dorlikar＠gmail.com
-
ralphmitchell＠gmail.com
-
spah＠syntec.co.uk