hello all, the last 4-5 days, i have a major problem with my xymon server. I run it for several years, monitoring connectivity on misc servers on my local network. Xymon server is connected to my local network via a VPN, and it seems that the problem is with the computers that have a private ip (10.xx.xx.xx).
when i restart xymon, everything seems ok for a few minutes. after this, all become red and i have a "flapping status" warning.
i tried to change values in tasks.cfg with no result. i unistalled/installed xymon, with no result. my configuration is very close to the default, except hosts.cfg of course. i tried to ping for hours a host on my localnet, from xymon server, successfully, with no packet lost..
can anyone help me with this ?
--
regards, Metron 6 (six)
Metron6 at gmail.com
This could be a number of things. The obvious question is what has changed (that you can see)? Any new routers, changes to the VPN setup? What tests are showing red/flapping? Are all tests for these affected hosts red/flapping? You say it is only those systems with a private network, do you have others that aren't a private network through the same VPN that are OK? What is happening at the VPN gateways at each end, can you run tcpdump on these systems to find any patterns? If tests are flapping, that means some packets are getting through, you should be able to see this on the gateways.
hope this helps, Phil
From: Xymon <xymon-bounces at xymon.com> on behalf of Metron 6 (six) <metron6 at gmail.com> Sent: Sunday, 30 July 2017 2:03 AM To: xymon at xymon.com Subject: [Xymon] flapping status
hello all, the last 4-5 days, i have a major problem with my xymon server. I run it for several years, monitoring connectivity on misc servers on my local network. Xymon server is connected to my local network via a VPN, and it seems that the problem is with the computers that have a private ip (10.xx.xx.xx).
when i restart xymon, everything seems ok for a few minutes. after this, all become red and i have a "flapping status" warning.
i tried to change values in tasks.cfg with no result. i unistalled/installed xymon, with no result. my configuration is very close to the default, except hosts.cfg of course. i tried to ping for hours a host on my localnet, from xymon server, successfully, with no packet lost..
can anyone help me with this ?
--
regards, Metron 6 (six)
Metron6 at gmail.com<mailto:Metron6 at gmail.com>
hello,
nothing changed.. ping tests are showing red/flapping, these are the only tests i run.. all hosts with real ips are green. the strange is that i run a ping test for hours, and says 0% packet loss, but xymon keeps the host in ref/flapping condition..
--- 10.122.2.1 ping statistics ---
104332 packets transmitted, 104261 received, 0% packet loss, time 104457908ms
rtt min/avg/max/mdev = 70.537/74.760/110.730/1.034 ms
On Mon, Jul 31, 2017 at 4:16 AM, Phil Crooker <Phil.Crooker at orix.com.au> wrote:
This could be a number of things. The obvious question is what has changed (that you can see)? Any new routers, changes to the VPN setup? What tests are showing red/flapping? Are all tests for these affected hosts red/flapping? You say it is only those systems with a private network, do you have others that aren't a private network through the same VPN that are OK? What is happening at the VPN gateways at each end, can you run tcpdump on these systems to find any patterns? If tests are flapping, that means some packets are getting through, you should be able to see this on the gateways.
hope this helps, Phil
*From:* Xymon <xymon-bounces at xymon.com> on behalf of Metron 6 (six) < metron6 at gmail.com> *Sent:* Sunday, 30 July 2017 2:03 AM *To:* xymon at xymon.com *Subject:* [Xymon] flapping status
hello all, the last 4-5 days, i have a major problem with my xymon server. I run it for several years, monitoring connectivity on misc servers on my local network. Xymon server is connected to my local network via a VPN, and it seems that the problem is with the computers that have a private ip (10.xx.xx.xx).
when i restart xymon, everything seems ok for a few minutes. after this, all become red and i have a "flapping status" warning.
i tried to change values in tasks.cfg with no result. i unistalled/installed xymon, with no result. my configuration is very close to the default, except hosts.cfg of course. i tried to ping for hours a host on my localnet, from xymon server, successfully, with no packet lost..
can anyone help me with this ?
--
regards, Metron 6 (six)
Metron6 at gmail.com
--
Please consider the environment before printing this e-mail
This message from ORIX Australia may contain confidential and/or privileged information. If you are not the intended recipient, any use, disclosure or copying of this message (or of any attachments to it) is not authorised. If you have received this message in error, please notify the sender immediately and delete the message and any attachments from your system. Please inform the sender if you do not wish to receive further communications by email.
ORIX has a Privacy Policy which outlines what kinds of personal information we collect and hold, how we may collect and handle it, and your rights regarding personal information. Please let us know if you would like a copy. The Privacy Policy and a Collection Statement are also available on our website <http://www.orix.com.au>.
We do not accept liability for any loss or damage caused by any computer viruses or defects that may be transmitted with this message. We recommend you carry out your own checks for viruses or defects.
--
regards, Metron 6 (six)
Metron6 at gmail.com
Are you running the ping test from multiple xymon servers?
I do that, my main server is on one network, and I have 2 hybrid proxy/backup servers on the more protected network.
Where is the NAT going on for this machine? Could it be a DNS issue? Have you tried “testip” in hosts.cfg?
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Metron 6 (six) Sent: Monday, July 31, 2017 11:03 AM To: Phil Crooker Cc: xymon at xymon.com Subject: Re: [Xymon] flapping status
hello,
nothing changed.. ping tests are showing red/flapping, these are the only tests i run.. all hosts with real ips are green. the strange is that i run a ping test for hours, and says 0% packet loss, but xymon keeps the host in ref/flapping condition..
--- 10.122.2.1 ping statistics ---
104332 packets transmitted, 104261 received, 0% packet loss, time 104457908ms
rtt min/avg/max/mdev = 70.537/74.760/110.730/1.034 ms
On Mon, Jul 31, 2017 at 4:16 AM, Phil Crooker <Phil.Crooker at orix.com.au<mailto:Phil.Crooker at orix.com.au>> wrote:
This could be a number of things. The obvious question is what has changed (that you can see)? Any new routers, changes to the VPN setup? What tests are showing red/flapping? Are all tests for these affected hosts red/flapping? You say it is only those systems with a private network, do you have others that aren't a private network through the same VPN that are OK? What is happening at the VPN gateways at each end, can you run tcpdump on these systems to find any patterns? If tests are flapping, that means some packets are getting through, you should be able to see this on the gateways.
hope this helps, Phil
From: Xymon <xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>> on behalf of Metron 6 (six) <metron6 at gmail.com<mailto:metron6 at gmail.com>> Sent: Sunday, 30 July 2017 2:03 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: [Xymon] flapping status
hello all, the last 4-5 days, i have a major problem with my xymon server. I run it for several years, monitoring connectivity on misc servers on my local network. Xymon server is connected to my local network via a VPN, and it seems that the problem is with the computers that have a private ip (10.xx.xx.xx).
when i restart xymon, everything seems ok for a few minutes. after this, all become red and i have a "flapping status" warning.
i tried to change values in tasks.cfg with no result. i unistalled/installed xymon, with no result. my configuration is very close to the default, except hosts.cfg of course. i tried to ping for hours a host on my localnet, from xymon server, successfully, with no packet lost..
can anyone help me with this ?
--
regards, Metron 6 (six)
Metron6 at gmail.com<mailto:Metron6 at gmail.com>
[http://web.orix.com.au/_resource/email/email-banner.jpg?rnd=201703091]
Please consider the environment before printing this e-mail
This message from ORIX Australia may contain confidential and/or privileged information. If you are not the intended recipient, any use, disclosure or copying of this message (or of any attachments to it) is not authorised. If you have received this message in error, please notify the sender immediately and delete the message and any attachments from your system. Please inform the sender if you do not wish to receive further communications by email.
ORIX has a Privacy Policy which outlines what kinds of personal information we collect and hold, how we may collect and handle it, and your rights regarding personal information. Please let us know if you would like a copy. The Privacy Policy and a Collection Statement are also available on our website<http://www.orix.com.au>.
We do not accept liability for any loss or damage caused by any computer viruses or defects that may be transmitted with this message. We recommend you carry out your own checks for viruses or defects.
--
regards, Metron 6 (six)
Metron6 at gmail.com<mailto:Metron6 at gmail.com> This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
hello all,
this was it.. few days ago, i started another xymon server, on another host, using the same config, with minor changes.. it was also checking my vpn hosts from the internet.. when i stopped this second server, everything started to work ok, on the first one, no red/flapping, etc..
can someone explain this ?
On Mon, Jul 31, 2017 at 7:22 PM, Root, Paul T <Paul.Root at centurylink.com> wrote:
Are you running the ping test from multiple xymon servers?
I do that, my main server is on one network, and I have 2 hybrid proxy/backup servers on the more protected network.
Where is the NAT going on for this machine?
Could it be a DNS issue? Have you tried “testip” in hosts.cfg?
*From:* Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Metron 6 (six) *Sent:* Monday, July 31, 2017 11:03 AM *To:* Phil Crooker *Cc:* xymon at xymon.com *Subject:* Re: [Xymon] flapping status
hello,
nothing changed.. ping tests are showing red/flapping, these are the only tests i run..
all hosts with real ips are green.
the strange is that i run a ping test for hours, and says 0% packet loss, but xymon keeps the host in ref/flapping condition..
--- 10.122.2.1 ping statistics ---
104332 packets transmitted, 104261 received, 0% packet loss, time 104457908ms
rtt min/avg/max/mdev = 70.537/74.760/110.730/1.034 ms
On Mon, Jul 31, 2017 at 4:16 AM, Phil Crooker <Phil.Crooker at orix.com.au> wrote:
This could be a number of things. The obvious question is what has changed (that you can see)? Any new routers, changes to the VPN setup? What tests are showing red/flapping? Are all tests for these affected hosts red/flapping? You say it is only those systems with a private network, do you have others that aren't a private network through the same VPN that are OK? What is happening at the VPN gateways at each end, can you run tcpdump on these systems to find any patterns? If tests are flapping, that means some packets are getting through, you should be able to see this on the gateways.
hope this helps, Phil
*From:* Xymon <xymon-bounces at xymon.com> on behalf of Metron 6 (six) < metron6 at gmail.com> *Sent:* Sunday, 30 July 2017 2:03 AM *To:* xymon at xymon.com *Subject:* [Xymon] flapping status
hello all,
the last 4-5 days, i have a major problem with my xymon server.
I run it for several years, monitoring connectivity on misc servers on my local network.
Xymon server is connected to my local network via a VPN, and it seems that the problem is with the computers that have a private ip (10.xx.xx.xx).
when i restart xymon, everything seems ok for a few minutes.
after this, all become red and i have a "flapping status" warning.
i tried to change values in tasks.cfg with no result.
i unistalled/installed xymon, with no result.
my configuration is very close to the default, except hosts.cfg of course.
i tried to ping for hours a host on my localnet, from xymon server, successfully, with no packet lost..
can anyone help me with this ?
--
regards, Metron 6 (six)
Metron6 at gmail.com
--
*Please consider the environment before printing this e-mail*
This message from ORIX Australia may contain confidential and/or privileged information. If you are not the intended recipient, any use, disclosure or copying of this message (or of any attachments to it) is not authorised. If you have received this message in error, please notify the sender immediately and delete the message and any attachments from your system. Please inform the sender if you do not wish to receive further communications by email.
ORIX has a Privacy Policy which outlines what kinds of personal information we collect and hold, how we may collect and handle it, and your rights regarding personal information. Please let us know if you would like a copy. The Privacy Policy and a Collection Statement are also available on our website <http://www.orix.com.au>.
We do not accept liability for any loss or damage caused by any computer viruses or defects that may be transmitted with this message. We recommend you carry out your own checks for viruses or defects.
--
regards, Metron 6 (six)
Metron6 at gmail.com This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
--
regards, Metron 6 (six)
Metron6 at gmail.com
Your new server has the configuration of your first server, so it has the original servers name and IP address as where to send.
XYMONSERVERHOSTNAME and XYMONSERVERIP in your xymonserver.cfg file.
From: Metron 6 (six) [mailto:metron6 at gmail.com] Sent: Monday, July 31, 2017 1:48 PM To: Root, Paul T Cc: Phil Crooker; xymon at xymon.com Subject: Re: [Xymon] flapping status
hello all,
this was it.. few days ago, i started another xymon server, on another host, using the same config, with minor changes.. it was also checking my vpn hosts from the internet.. when i stopped this second server, everything started to work ok, on the first one, no red/flapping, etc..
can someone explain this ?
On Mon, Jul 31, 2017 at 7:22 PM, Root, Paul T <Paul.Root at centurylink.com<mailto:Paul.Root at centurylink.com>> wrote: Are you running the ping test from multiple xymon servers?
I do that, my main server is on one network, and I have 2 hybrid proxy/backup servers on the more protected network.
Where is the NAT going on for this machine? Could it be a DNS issue? Have you tried “testip” in hosts.cfg?
From: Xymon [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] On Behalf Of Metron 6 (six) Sent: Monday, July 31, 2017 11:03 AM To: Phil Crooker Cc: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] flapping status
hello,
nothing changed.. ping tests are showing red/flapping, these are the only tests i run.. all hosts with real ips are green. the strange is that i run a ping test for hours, and says 0% packet loss, but xymon keeps the host in ref/flapping condition..
--- 10.122.2.1 ping statistics ---
104332 packets transmitted, 104261 received, 0% packet loss, time 104457908ms
rtt min/avg/max/mdev = 70.537/74.760/110.730/1.034 ms
On Mon, Jul 31, 2017 at 4:16 AM, Phil Crooker <Phil.Crooker at orix.com.au<mailto:Phil.Crooker at orix.com.au>> wrote:
This could be a number of things. The obvious question is what has changed (that you can see)? Any new routers, changes to the VPN setup? What tests are showing red/flapping? Are all tests for these affected hosts red/flapping? You say it is only those systems with a private network, do you have others that aren't a private network through the same VPN that are OK? What is happening at the VPN gateways at each end, can you run tcpdump on these systems to find any patterns? If tests are flapping, that means some packets are getting through, you should be able to see this on the gateways.
hope this helps, Phil
From: Xymon <xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>> on behalf of Metron 6 (six) <metron6 at gmail.com<mailto:metron6 at gmail.com>> Sent: Sunday, 30 July 2017 2:03 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: [Xymon] flapping status
hello all, the last 4-5 days, i have a major problem with my xymon server. I run it for several years, monitoring connectivity on misc servers on my local network. Xymon server is connected to my local network via a VPN, and it seems that the problem is with the computers that have a private ip (10.xx.xx.xx).
when i restart xymon, everything seems ok for a few minutes. after this, all become red and i have a "flapping status" warning.
i tried to change values in tasks.cfg with no result. i unistalled/installed xymon, with no result. my configuration is very close to the default, except hosts.cfg of course. i tried to ping for hours a host on my localnet, from xymon server, successfully, with no packet lost..
can anyone help me with this ?
--
regards, Metron 6 (six)
Metron6 at gmail.com<mailto:Metron6 at gmail.com>
[Image removed by sender.]
Please consider the environment before printing this e-mail
This message from ORIX Australia may contain confidential and/or privileged information. If you are not the intended recipient, any use, disclosure or copying of this message (or of any attachments to it) is not authorised. If you have received this message in error, please notify the sender immediately and delete the message and any attachments from your system. Please inform the sender if you do not wish to receive further communications by email.
ORIX has a Privacy Policy which outlines what kinds of personal information we collect and hold, how we may collect and handle it, and your rights regarding personal information. Please let us know if you would like a copy. The Privacy Policy and a Collection Statement are also available on our website<http://www.orix.com.au>.
We do not accept liability for any loss or damage caused by any computer viruses or defects that may be transmitted with this message. We recommend you carry out your own checks for viruses or defects.
--
regards, Metron 6 (six)
Metron6 at gmail.com<mailto:Metron6 at gmail.com> This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
--
regards, Metron 6 (six)
Metron6 at gmail.com<mailto:Metron6 at gmail.com> This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
hello all,
it was this thing, i changed XYMONSERVERHOSTNAME and everything is fine now.. thank you all...
On Mon, Jul 31, 2017 at 10:02 PM, Root, Paul T <Paul.Root at centurylink.com> wrote:
Your new server has the configuration of your first server, so it has the original servers name and IP address as where to send.
XYMONSERVERHOSTNAME and XYMONSERVERIP in your xymonserver.cfg file.
*From:* Metron 6 (six) [mailto:metron6 at gmail.com] *Sent:* Monday, July 31, 2017 1:48 PM *To:* Root, Paul T *Cc:* Phil Crooker; xymon at xymon.com
*Subject:* Re: [Xymon] flapping status
hello all,
this was it.. few days ago, i started another xymon server, on another host, using the same config, with minor changes..
it was also checking my vpn hosts from the internet..
when i stopped this second server, everything started to work ok, on the first one, no red/flapping, etc..
can someone explain this ?
On Mon, Jul 31, 2017 at 7:22 PM, Root, Paul T <Paul.Root at centurylink.com> wrote:
Are you running the ping test from multiple xymon servers?
I do that, my main server is on one network, and I have 2 hybrid proxy/backup servers on the more protected network.
Where is the NAT going on for this machine?
Could it be a DNS issue? Have you tried “testip” in hosts.cfg?
*From:* Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Metron 6 (six) *Sent:* Monday, July 31, 2017 11:03 AM *To:* Phil Crooker *Cc:* xymon at xymon.com *Subject:* Re: [Xymon] flapping status
hello,
nothing changed.. ping tests are showing red/flapping, these are the only tests i run..
all hosts with real ips are green.
the strange is that i run a ping test for hours, and says 0% packet loss, but xymon keeps the host in ref/flapping condition..
--- 10.122.2.1 ping statistics ---
104332 packets transmitted, 104261 received, 0% packet loss, time 104457908ms
rtt min/avg/max/mdev = 70.537/74.760/110.730/1.034 ms
On Mon, Jul 31, 2017 at 4:16 AM, Phil Crooker <Phil.Crooker at orix.com.au> wrote:
This could be a number of things. The obvious question is what has changed (that you can see)? Any new routers, changes to the VPN setup? What tests are showing red/flapping? Are all tests for these affected hosts red/flapping? You say it is only those systems with a private network, do you have others that aren't a private network through the same VPN that are OK? What is happening at the VPN gateways at each end, can you run tcpdump on these systems to find any patterns? If tests are flapping, that means some packets are getting through, you should be able to see this on the gateways.
hope this helps, Phil
*From:* Xymon <xymon-bounces at xymon.com> on behalf of Metron 6 (six) < metron6 at gmail.com> *Sent:* Sunday, 30 July 2017 2:03 AM *To:* xymon at xymon.com *Subject:* [Xymon] flapping status
hello all,
the last 4-5 days, i have a major problem with my xymon server.
I run it for several years, monitoring connectivity on misc servers on my local network.
Xymon server is connected to my local network via a VPN, and it seems that the problem is with the computers that have a private ip (10.xx.xx.xx).
when i restart xymon, everything seems ok for a few minutes.
after this, all become red and i have a "flapping status" warning.
i tried to change values in tasks.cfg with no result.
i unistalled/installed xymon, with no result.
my configuration is very close to the default, except hosts.cfg of course.
i tried to ping for hours a host on my localnet, from xymon server, successfully, with no packet lost..
can anyone help me with this ?
--
regards, Metron 6 (six)
Metron6 at gmail.com
--
[image: Image removed by sender.] *Please consider the environment before printing this e-mail*
This message from ORIX Australia may contain confidential and/or privileged information. If you are not the intended recipient, any use, disclosure or copying of this message (or of any attachments to it) is not authorised. If you have received this message in error, please notify the sender immediately and delete the message and any attachments from your system. Please inform the sender if you do not wish to receive further communications by email.
ORIX has a Privacy Policy which outlines what kinds of personal information we collect and hold, how we may collect and handle it, and your rights regarding personal information. Please let us know if you would like a copy. The Privacy Policy and a Collection Statement are also available on our website <http://www.orix.com.au>.
We do not accept liability for any loss or damage caused by any computer viruses or defects that may be transmitted with this message. We recommend you carry out your own checks for viruses or defects.
--
regards, Metron 6 (six)
Metron6 at gmail.com
This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
--
regards, Metron 6 (six)
Metron6 at gmail.com This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
--
regards, Metron 6 (six)
Metron6 at gmail.com
participants (3)
-
metron6＠gmail.com
-
Paul.Root＠CenturyLink.com
-
Phil.Crooker＠orix.com.au