Hi all
Has anyone got Xymon monitoring HP Proliant power supplies under Linux?
Also, has anyone got monitoring of HP Proliant RAID and or power supplies under Windows? (Win 2003 and 2008R2)
Still trying to get role based views going. Has anyone done this?
Thanks
CC
-- RHCE#805007969328369
Colin,
Hi all
Has anyone got Xymon monitoring HP Proliant power supplies under Linux?
Also, has anyone got monitoring of HP Proliant RAID and or power supplies under Windows? (Win 2003 and 2008R2)
This is possible using devmon, assuming you have Linux proliant service pack installed or Windows SNMP service installed and running and HP agents. Covers DL series Proliant servers. devmon takes a bit of fiddling to get running but is very good once you've got it right.
ML servers are another can of worms entirely... You can choose between IPMI or parsing web pages from ILO100 cards. RAID checking requires running hpacucli utility.
Still trying to get role based views going. Has anyone done this?
Not sure I understand what you mean. Are you talking about generating custom views for particular groups - e.g. admins, management, etc?
David.
-- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617
Keep up to date with what's happening in Australian sport visit http://www.ausport.gov.au
This message is intended for the addressee named and may contain confidential and privileged information. If you are not the intended recipient please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. If you receive this message in error, please delete it and notify the sender.
On Thu, Sep 23, 2010 at 9:07 AM, David Baldwin <david.baldwin at ausport.gov.au> wrote:
Colin,
Hi all
Has anyone got Xymon monitoring HP Proliant power supplies under Linux?
Also, has anyone got monitoring of HP Proliant RAID and or power supplies under Windows? (Win 2003 and 2008R2)
This is possible using devmon, assuming you have Linux proliant service pack installed or Windows SNMP service installed and running and HP agents. Covers DL series Proliant servers. devmon takes a bit of fiddling to get running but is very good once you've got it right.
ML servers are another can of worms entirely... You can choose between IPMI or parsing web pages from ILO100 cards. RAID checking requires running hpacucli utility.
Still trying to get role based views going. Has anyone done this?
Not sure I understand what you mean. Are you talking about generating custom views for particular groups - e.g. admins, management, etc?
David.
-- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617
Hi David
I can't use SNMP as the security policy does not allow SNMP traffic in the network where these servers are located. The servers are all either DL380G5 or G6 with some new DL385s likely to land soon.
I'd like to prevent user group A viewing user group B's systems and visa versa. This is where to roles come in, if there is another solution I'd be happy to hear it.
I've just got the HP RAID checks working on a couple of test (Linux based) Proliants. As we've had a couple of power supplies fail, I was hoping to monitor these as well.
Thanks
CC
-- RHCE#805007969328369
Colin,
I can't use SNMP as the security policy does not allow SNMP traffic in the network where these servers are located. The servers are all either DL380G5 or G6 with some new DL385s likely to land soon.
Without SNMP across the network, you could use SNMP just to localhost (i.e. install devmon locally on each host), or you would need to work out what CLI utils were available to display status and then parse output, etc to create your own test. There may already be something on xymonton or deadcat.net - I haven't checked.
hpasmcli(4) hpasm commands
hpasmcli(4)
NAME hpasmcli - HP management CLI
SYNOPSIS hpasmcli [-s "<command1>;<command2>;...<commandN>"]
DESCRIPTION hpasmcli is a scriptable command line interface for interacting with the hpasmd or hpasmxld management daemons. It is used to view/set/mod- ify BIOS settings such as hyperthreading, boot control, and UID LEDs. It can be used to display hardware status, such as fans, power sup- plies, etc. It also can show, repair, and clear the IML.
The CLI supports TAB completion of command names and has a
history buffer that can be accessed using the up/down arrows.
In addition to the command line interface, hpasmcli also
supports a mode that is usable for incorporating into basic shell scripts. The return value of hpasmcli in script mode can be used to verify a command executed successfully. If multiple commands are executed, only the sta- tus of the last command is returned to the shell. As an example, the following first executes the <SHOW SERVER> command to retrieve basic system information, and next reads the status of the UID:
hpasmcli -s "show server; show uid"
OPTIONS -s "<command1>;<command2;...<commandN>"
Enables script mode. hpasmcli will execute the commands listed as
argu- ments in the order written. At least one command must be specified.
COMMANDS [ CLEAR | DISABLE | ENABLE | EXIT | HELP | NOTE | QUIT |REPAIR | SET | SHOW ]
CLEAR [ IML ]
Clears the specified feature.
DISABLE [ ASR | HT | PXE [ NIC1 | NIC2 | NIC3 | NIC4 | NIC5 ] | WOL ]
Disables the specified feature.
ASR - Disables Automatic Server Recovery.
HT - Disables Processor Hyper-Threading.
PXE - Disables PXE BOOT on specified NIC.
WOL - Disables Wake-On-Lan feature.
ENABLE [ ASR | HT | PXE [ NIC1 | NIC2 | NIC3 | NIC4 | NIC5 ] | WOL ]
Enables the specified feature.
ASR - Enables Automatic Server Recovery.
HT - Enables Processor Hyper-Threading.
PXE - Enables PXE BOOT on specified NIC.
WOL - Enables Wake-On-Lan feature.
EXIT - Quit the program.
HELP - Provides assistance on the available commands.
NOTE [ IML ]
IML - Add a maintenance note to the IML.
QUIT - Exit the program.
REPAIR [ IML ]
IML <entry> - Mark an IML entry as repaired.
SET [ ASR <timeout> | BOOT [ FIRST [ CDROM | FLOPPY | HDD |
PXE | USBKEY ] | ONCE [ CDROM | FLOPPY | HDD | PXE | RBSU ] ] | F1 [ ENABLED | DELAYED | DISABLED ] | NAME <string> | SERIAL [ BIOS | EMBEDDED | VIRTUAL ] | UID [ ON | OFF ] Sets or configured the feature as specified.
ASR <timeout> sets the timeout value of ASR.
BOOT sets the first boot device or the onetime boot option.
FIRST sets the first boot device. ONCE sets the next boot device.
F1 sets the desired POST F1 prompt behavior.
ENABLED means to enable POST F1 prompt.
DELAYED means to enable F1 prompt but timeout and
continue booting if no input.
DISABLED means don’t stop POST at F1.
NAME <string> - Set the system name.
SET SERIAL BIOS [ COM1 BAUD | COM2 BAUD | DISABLED ] -
Set the BIOS serial COM port baud rate. Baud rate must be either 9600, 19200, 57600 or 115200.
SET SERIAL EMBEDDED [ PORTA | PORTB ]. - Set the embedded
serial port to COM1, COM2, COM3, COM4, or DISABLED.
SET SERIAL VIRTUAL [ COM1 | COM2 | DISABLED ] - Set
virtual COM port to COM1, COM2, or DISABLED.
UID [ ON | OFF ] - Turn the UID on/off.
SHOW [ ASR | BOOT | DIMM <SPD> | F1 | FANS | HT | IML | IPL |
NAME | PORTMAP | POWERSUPPLY | PXE | SERIAL [ BIOS | EMBEDDED | VIRTUAL ] | SERVER | TEMP | UID | WOL ] Show the current status or configuration of the selected feature.
ASR - Displays the Automatic System Recovery status and timeout.
BOOT - Displays the current first boot device and one
time boot option.
DIMM - Displays the current memory dimm configuration.
Optionally will dump the SPD bytes if available.
F1 - Displays the configuration of the POST F1 prompt.
FANS - Displays the current status and fan configuration.
HT - Displays the status of Processor Hyper-Threading.
IML - Displays the Integrated Management Log.
IPL - Displays the current boot order.
NAME - Displays the System Name.
PORTMAP - Displays the NIC port Mapping information.
POWERSUPPLY - Displays current Powersupply status and
configura- tion.
PXE - Displays the PXE configuration of each embedded NIC.
SERIAL BIOS - Displays the current BIOS console
redirection port setting.
SERIAL EMBEDDED - Displays the current embedded serial
port set- ting.
SERIAL VIRTUAL - Displays the current virtual serial port
setting.
SERVER - Displays various information about the system.
TEMP - Displays the current status of the temperature sensors.
UID - Displays the current status of the UID LED.
WOL - Displays the current Wake-On-Lan configuration.
EXAMPLES Show the system fan and temp status. hpasmcli -s <SHOW FANS; SHOW TEMP>
Turn the UID on.
hpasmcli -s <SET UID ON>
LIMITATIONS This utility requires the health driver (hpasmd, hpasmxld or hpasm- lited) to be loaded. Some commands may not be supported on all servers. This includes commands that use features only available on servers with an iLo chip. Other commands may only make sense on certain specific Proliant servers.
AUTHOR Hewlett-Packard Company <http://www.hp.com/linux>.
COPYRIGHT Copyright (c) 2004-2007 Hewlett-Packard Development Company, L.P.
hpasmcli
HP management CLI for Linux (v2.0) Copyright 2008 Hewlett-Packard Development Group, L.P.
NOTE: Some hpasmcli commands may not be supported on all Proliant servers. Type 'help' to get a list of all top level commands.
hpasmcli> show fans Fan Location Present Speed of max Redundant Partner Hot-pluggable
#1 SYSTEM Yes NORMAL 20% Yes 0
No
#2 SYSTEM Yes NORMAL 20% Yes 0
No
#3 SYSTEM Yes NORMAL 20% Yes 0
No
hpasmcli> show powersupply Power supply #1 Present : Yes Redundant: Yes Condition: Ok Hotplug : Supported Power : 35 Watts Power supply #2 Present : Yes Redundant: Yes Condition: Ok Hotplug : Supported Power : 60 Watts
I'd like to prevent user group A viewing user group B's systems and visa versa. This is where to roles come in, if there is another solution I'd be happy to hear it.
See http://sourceforge.net/apps/mediawiki/xymon/index.php?title=XymonFaq#How_do_...
At worst, you may need separate bbgen commands to create the exact combination/layout of pages you need. See bbgen man page.
I've just got the HP RAID checks working on a couple of test (Linux based) Proliants. As we've had a couple of power supplies fail, I was hoping to monitor these as well.
_Always_ a good idea to monitor hardware!
David.
-- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617
Keep up to date with what's happening in Australian sport visit http://www.ausport.gov.au
This message is intended for the addressee named and may contain confidential and privileged information. If you are not the intended recipient please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. If you receive this message in error, please delete it and notify the sender.
Hi Colin
Unless there is some method of checking the hardware from command line, SNMP might be your only answer. Have you tried to snmpwalk localhost? If SNMP is being blocked at firewall or network level, a server may still be able to interrogate itself. It's a long shot, but give it a try. It depends on where your SNMP traffic is being blocked. If you have to interrogate a LOM, try doing it from something on the same subnet. If it works, you can then write a client script that does snmpget, and you can that to send a test to Xymon server in the usual way.
Regards multiple views, the feature you are looking for is described in the bbgen(1) man-page, look for the "BUILDING ALTERNATE PAGESETS" section. At our last mutual contract, you may recall, we did exactly that.
Also, search the archives. http://www.xymon.com/archive/ There are a few good descriptions floating about of how to do it. Password access to the different pages is handled by your web server.
Cheers Vernon
On Thu, Sep 23, 2010 at 9:46 AM, Colin Coe <colin.coe at gmail.com> wrote:
On Thu, Sep 23, 2010 at 9:07 AM, David Baldwin <david.baldwin at ausport.gov.au> wrote:
Colin,
Hi all
Has anyone got Xymon monitoring HP Proliant power supplies under Linux?
Also, has anyone got monitoring of HP Proliant RAID and or power supplies under Windows? (Win 2003 and 2008R2)
This is possible using devmon, assuming you have Linux proliant service pack installed or Windows SNMP service installed and running and HP agents. Covers DL series Proliant servers. devmon takes a bit of fiddling to get running but is very good once you've got it right.
ML servers are another can of worms entirely... You can choose between IPMI or parsing web pages from ILO100 cards. RAID checking requires running hpacucli utility.
Still trying to get role based views going. Has anyone done this?
Not sure I understand what you mean. Are you talking about generating custom views for particular groups - e.g. admins, management, etc?
David.
-- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617
Hi David
I can't use SNMP as the security policy does not allow SNMP traffic in the network where these servers are located. The servers are all either DL380G5 or G6 with some new DL385s likely to land soon.
I'd like to prevent user group A viewing user group B's systems and visa versa. This is where to roles come in, if there is another solution I'd be happy to hear it.
I've just got the HP RAID checks working on a couple of test (Linux based) Proliants. As we've had a couple of power supplies fail, I was hoping to monitor these as well.
Thanks
CC
-- RHCE#805007969328369
To unsubscribe from the xymon list, send an e-mail to xymon-unsubscribe at xymon.com
Thanks David, I had overlooked the hpasmcli command. Working on the script now.
SNMP is simply not allowed. Blocked by firewalls and disallowed by policy.
CC
On Thu, Sep 23, 2010 at 10:25 AM, Vernon Everett <everett.vernon at gmail.com> wrote:
Hi Colin
Unless there is some method of checking the hardware from command line, SNMP might be your only answer. Have you tried to snmpwalk localhost? If SNMP is being blocked at firewall or network level, a server may still be able to interrogate itself. It's a long shot, but give it a try. It depends on where your SNMP traffic is being blocked. If you have to interrogate a LOM, try doing it from something on the same subnet. If it works, you can then write a client script that does snmpget, and you can that to send a test to Xymon server in the usual way.
Regards multiple views, the feature you are looking for is described in the bbgen(1) man-page, look for the "BUILDING ALTERNATE PAGESETS" section. At our last mutual contract, you may recall, we did exactly that.
Also, search the archives. http://www.xymon.com/archive/ There are a few good descriptions floating about of how to do it. Password access to the different pages is handled by your web server.
Cheers Vernon
On Thu, Sep 23, 2010 at 9:46 AM, Colin Coe <colin.coe at gmail.com> wrote:
On Thu, Sep 23, 2010 at 9:07 AM, David Baldwin <david.baldwin at ausport.gov.au> wrote:
Colin,
Hi all
Has anyone got Xymon monitoring HP Proliant power supplies under Linux?
Also, has anyone got monitoring of HP Proliant RAID and or power supplies under Windows? (Win 2003 and 2008R2)
This is possible using devmon, assuming you have Linux proliant service pack installed or Windows SNMP service installed and running and HP agents. Covers DL series Proliant servers. devmon takes a bit of fiddling to get running but is very good once you've got it right.
ML servers are another can of worms entirely... You can choose between IPMI or parsing web pages from ILO100 cards. RAID checking requires running hpacucli utility.
Still trying to get role based views going. Has anyone done this?
Not sure I understand what you mean. Are you talking about generating custom views for particular groups - e.g. admins, management, etc?
David.
-- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617
Hi David
I can't use SNMP as the security policy does not allow SNMP traffic in the network where these servers are located. The servers are all either DL380G5 or G6 with some new DL385s likely to land soon.
I'd like to prevent user group A viewing user group B's systems and visa versa. This is where to roles come in, if there is another solution I'd be happy to hear it.
I've just got the HP RAID checks working on a couple of test (Linux based) Proliants. As we've had a couple of power supplies fail, I was hoping to monitor these as well.
Thanks
CC
-- RHCE#805007969328369
To unsubscribe from the xymon list, send an e-mail to xymon-unsubscribe at xymon.com
-- RHCE#805007969328369
Hi Vernon
Yep, I recalled that it could be done not how.
CC
On Thu, Sep 23, 2010 at 10:58 AM, Colin Coe <colin.coe at gmail.com> wrote:
Thanks David, I had overlooked the hpasmcli command. Working on the script now.
SNMP is simply not allowed. Blocked by firewalls and disallowed by policy.
CC
On Thu, Sep 23, 2010 at 10:25 AM, Vernon Everett <everett.vernon at gmail.com> wrote:
Hi Colin
Unless there is some method of checking the hardware from command line, SNMP might be your only answer. Have you tried to snmpwalk localhost? If SNMP is being blocked at firewall or network level, a server may still be able to interrogate itself. It's a long shot, but give it a try. It depends on where your SNMP traffic is being blocked. If you have to interrogate a LOM, try doing it from something on the same subnet. If it works, you can then write a client script that does snmpget, and you can that to send a test to Xymon server in the usual way.
Regards multiple views, the feature you are looking for is described in the bbgen(1) man-page, look for the "BUILDING ALTERNATE PAGESETS" section. At our last mutual contract, you may recall, we did exactly that.
Also, search the archives. http://www.xymon.com/archive/ There are a few good descriptions floating about of how to do it. Password access to the different pages is handled by your web server.
Cheers Vernon
On Thu, Sep 23, 2010 at 9:46 AM, Colin Coe <colin.coe at gmail.com> wrote:
On Thu, Sep 23, 2010 at 9:07 AM, David Baldwin <david.baldwin at ausport.gov.au> wrote:
Colin,
Hi all
Has anyone got Xymon monitoring HP Proliant power supplies under Linux?
Also, has anyone got monitoring of HP Proliant RAID and or power supplies under Windows? (Win 2003 and 2008R2)
This is possible using devmon, assuming you have Linux proliant service pack installed or Windows SNMP service installed and running and HP agents. Covers DL series Proliant servers. devmon takes a bit of fiddling to get running but is very good once you've got it right.
ML servers are another can of worms entirely... You can choose between IPMI or parsing web pages from ILO100 cards. RAID checking requires running hpacucli utility.
Still trying to get role based views going. Has anyone done this?
Not sure I understand what you mean. Are you talking about generating custom views for particular groups - e.g. admins, management, etc?
David.
-- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617
Hi David
I can't use SNMP as the security policy does not allow SNMP traffic in the network where these servers are located. The servers are all either DL380G5 or G6 with some new DL385s likely to land soon.
I'd like to prevent user group A viewing user group B's systems and visa versa. This is where to roles come in, if there is another solution I'd be happy to hear it.
I've just got the HP RAID checks working on a couple of test (Linux based) Proliants. As we've had a couple of power supplies fail, I was hoping to monitor these as well.
Thanks
CC
-- RHCE#805007969328369
To unsubscribe from the xymon list, send an e-mail to xymon-unsubscribe at xymon.com
-- RHCE#805007969328369
-- RHCE#805007969328369
Haven't done it since that time, so I am probably not going to be much help. I do recall we needed a seperate bb-hosts and hobbitserver.cfg We then ran another instance of bbgen (per view) to generate the new views.
However, reading the bb-gen man page, it look likes that's the old way, and there is a simpler method.
Cheers Vernon
On Thu, Sep 23, 2010 at 11:29 AM, Colin Coe <colin.coe at gmail.com> wrote:
Hi Vernon
Yep, I recalled that it could be done not how.
CC
On Thu, Sep 23, 2010 at 10:58 AM, Colin Coe <colin.coe at gmail.com> wrote:
Thanks David, I had overlooked the hpasmcli command. Working on the script now.
SNMP is simply not allowed. Blocked by firewalls and disallowed by policy.
CC
On Thu, Sep 23, 2010 at 10:25 AM, Vernon Everett <everett.vernon at gmail.com> wrote:
Hi Colin
Unless there is some method of checking the hardware from command line, SNMP might be your only answer. Have you tried to snmpwalk localhost? If SNMP is being blocked at firewall or network level, a server may still be able to interrogate itself. It's a long shot, but give it a try. It depends on where your SNMP traffic is being blocked. If you have to interrogate a LOM, try doing it from something on the same subnet. If it works, you can then write a client script that does snmpget, and you can that to send a test to Xymon server in the usual way.
Regards multiple views, the feature you are looking for is described in the bbgen(1) man-page, look for the "BUILDING ALTERNATE PAGESETS" section. At our last mutual contract, you may recall, we did exactly that.
Also, search the archives. http://www.xymon.com/archive/ There are a few good descriptions floating about of how to do it. Password access to the different pages is handled by your web server.
Cheers Vernon
On Thu, Sep 23, 2010 at 9:46 AM, Colin Coe <colin.coe at gmail.com> wrote:
On Thu, Sep 23, 2010 at 9:07 AM, David Baldwin <david.baldwin at ausport.gov.au> wrote:
Colin,
Hi all
Has anyone got Xymon monitoring HP Proliant power supplies under
Linux?
Also, has anyone got monitoring of HP Proliant RAID and or power supplies under Windows? (Win 2003 and 2008R2)
This is possible using devmon, assuming you have Linux proliant service pack installed or Windows SNMP service installed and running and HP agents. Covers DL series Proliant servers. devmon takes a bit of fiddling to get running but is very good once you've got it right.
ML servers are another can of worms entirely... You can choose between IPMI or parsing web pages from ILO100 cards. RAID checking requires running hpacucli utility.
Still trying to get role based views going. Has anyone done this?
Not sure I understand what you mean. Are you talking about generating custom views for particular groups - e.g. admins, management, etc?
David.
-- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617
Hi David
I can't use SNMP as the security policy does not allow SNMP traffic in the network where these servers are located. The servers are all either DL380G5 or G6 with some new DL385s likely to land soon.
I'd like to prevent user group A viewing user group B's systems and visa versa. This is where to roles come in, if there is another solution I'd be happy to hear it.
I've just got the HP RAID checks working on a couple of test (Linux based) Proliants. As we've had a couple of power supplies fail, I was hoping to monitor these as well.
Thanks
CC
-- RHCE#805007969328369
To unsubscribe from the xymon list, send an e-mail to xymon-unsubscribe at xymon.com
-- RHCE#805007969328369
-- RHCE#805007969328369
To unsubscribe from the xymon list, send an e-mail to xymon-unsubscribe at xymon.com
Don't forget the scripts at deadcat and xymonton that talk directly to hpacucli and other similar HP utilities.
We used the hpacucli to get info from the RAID controllers. Saved my butt on failing hard drives more than once.
--j
On Sep 22, 2010, at 10:58 PM, Colin Coe wrote:
Thanks David, I had overlooked the hpasmcli command. Working on the script now.
SNMP is simply not allowed. Blocked by firewalls and disallowed by policy.
CC
On Thu, Sep 23, 2010 at 10:25 AM, Vernon Everett <everett.vernon at gmail.com> wrote:
Hi Colin
Unless there is some method of checking the hardware from command line, SNMP might be your only answer. Have you tried to snmpwalk localhost? If SNMP is being blocked at firewall or network level, a server may still be able to interrogate itself. It's a long shot, but give it a try. It depends on where your SNMP traffic is being blocked. If you have to interrogate a LOM, try doing it from something on the same subnet. If it works, you can then write a client script that does snmpget, and you can that to send a test to Xymon server in the usual way.
Regards multiple views, the feature you are looking for is described in the bbgen(1) man-page, look for the "BUILDING ALTERNATE PAGESETS" section. At our last mutual contract, you may recall, we did exactly that.
Also, search the archives. http://www.xymon.com/archive/ There are a few good descriptions floating about of how to do it. Password access to the different pages is handled by your web server.
Cheers Vernon
On Thu, Sep 23, 2010 at 9:46 AM, Colin Coe <colin.coe at gmail.com> wrote:
On Thu, Sep 23, 2010 at 9:07 AM, David Baldwin <david.baldwin at ausport.gov.au> wrote:
Colin,
Hi all
Has anyone got Xymon monitoring HP Proliant power supplies under Linux?
Also, has anyone got monitoring of HP Proliant RAID and or power supplies under Windows? (Win 2003 and 2008R2)
This is possible using devmon, assuming you have Linux proliant service pack installed or Windows SNMP service installed and running and HP agents. Covers DL series Proliant servers. devmon takes a bit of fiddling to get running but is very good once you've got it right.
ML servers are another can of worms entirely... You can choose between IPMI or parsing web pages from ILO100 cards. RAID checking requires running hpacucli utility.
Still trying to get role based views going. Has anyone done this?
Not sure I understand what you mean. Are you talking about generating custom views for particular groups - e.g. admins, management, etc?
David.
-- David Baldwin - IT Unit Australian Sports Commission www.ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617
Hi David
I can't use SNMP as the security policy does not allow SNMP traffic in the network where these servers are located. The servers are all either DL380G5 or G6 with some new DL385s likely to land soon.
I'd like to prevent user group A viewing user group B's systems and visa versa. This is where to roles come in, if there is another solution I'd be happy to hear it.
I've just got the HP RAID checks working on a couple of test (Linux based) Proliants. As we've had a couple of power supplies fail, I was hoping to monitor these as well.
Thanks
CC
-- RHCE#805007969328369
To unsubscribe from the xymon list, send an e-mail to xymon-unsubscribe at xymon.com
-- RHCE#805007969328369
To unsubscribe from the xymon list, send an e-mail to xymon-unsubscribe at xymon.com
participants (5)
-
colin.coe@gmail.com
-
david.baldwin@ausport.gov.au
-
everett.vernon@gmail.com
-
mailinglist0@skurfer.com
-
questy@gmail.com