ofc, thx for the help, everything is working now :)

On Tue, Nov 6, 2012 at 4:13 PM, W.J.M. Nelis <Wim.Nelis at nlr.nl> wrote:

Hello Heine,

Great ! now im getting data in two rrd files, i just cant display them,

...

this is what i put in my graphs.cfg

[mqnet] FNPATTERN ^mqnet.(.+).rrd TITLE MQ Put Get Times YAXIS ms DEF:put at RRDIDX@=@RRDFN@:ms:**AVERAGE DEF:get at RRDIDX@=@RRDFN@:ms:**AVERAGE LINE2:put at RRDIDX@#@COLOR@:@**RRDPARAM@ LINE2:get at RRDIDX@#@COLOR@:@**RRDPARAM@ GPRINT:put at RRDIDX@:LAST:Put \: %5.1lf%s (cur) GPRINT:put at RRDIDX@:MAX: \: %5.1lf%s (max) GPRINT:put at RRDIDX@:MIN: \: %5.1lf%s (min) GPRINT:put at RRDIDX@:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:get at RRDIDX@:LAST:Get\: %5.1lf%s (cur) GPRINT:get at RRDIDX@:MAX: \: %5.1lf%s (max) GPRINT:get at RRDIDX@:MIN: \: %5.1lf%s (min) GPRINT:get at RRDIDX@:AVERAGE: \: %5.1lf%s (avg)\n

the graphs are just blank, any tips on how to debug this ?

Assuming you've used the DEVMON way as described below, you will have two datasets (DS) in both RRD files. The DS-names are 'put' and 'get'. You can check this by using 'rrdtool info mqnet*rrd'. If this is correct, you can change the DEF lines in the graph-definition accordingly, that is replace ms by put or get.

HTH, Wim Nelis.

On Tue, Nov 6, 2012 at 1:51 PM, W.J.M. Nelis <Wim.Nelis at nlr.nl

...

<mailto:Wim.Nelis at nlr.nl>> wrote:

Hello,


    I'm trying to write a server side script to monitor MQ put/get
    status and
    times,
    the script output looks like this :


    Tue Nov 6 09:08:38 CET 2012


    MQ1 - OK

    put : 21
    get : 20
    MQ2 - OK

    put : 20
    get : 20


    The script works well, but i can't figure out how to do the graphs
    the same
    way as the built in
    http, that is with multiple test showing up in the same graph, is

that possible ?

I can think of three different ways to do this type of work in Xymon.

A relative simple way is to use the same way devmon is using.

If you make the output of the script to contain something like:

<!-- linecount=2 -->
<!--DEVMON RRD: XYZ 0 0
DS:put:GAUGE:600:0:U DS:get:GAUGE:600:0:U
mq1 21:20
mq2 20:20
-->

and add to xymonserver.cfg:
TEST2RRD= ...,ABC=devmon

(in which ABC is the name of the test / column), you're done. It will
create for the host for which this test is reported two RRD's called
XYZ.mq1.rrd and XYZ.mq2.rrd. With a suitable graph definition you can
show this in one graph.

HTH,
Wim Nelis.

---

---

The NLR disclaimer is valid for NLR e-mail messages.

This message is only meant for providing information. Nothing in this e-mail message amounts to a contractual or legal commitment on the part of the sender. This message may contain information that is not intended for you. If you are not the addressee or if this message was sent to you by mistake, you are requested to inform the sender and delete the message. Sender accepts no liability for damage of any kind resulting from the risks inherent in the electronic transmission of messages.

---

---