I'm sure I'm missing something simple, but trying to compile 4.3.26 fails:
gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -DLINUX -I/home/xymon/xymon-4.3.26/include -o
xymonnet -Wl,--rpath, xymonnet.o contest.o httptest.o httpresult.o
ldaptest.o dns.o dns2.o httpcookies.o -lcares ../lib/libxymontime.a
../lib/libxymoncomm.a -lssl -lcrypto ../lib/libxymon.a -lpcre
contest.o: In function setup_ssl': /home/xymon/xymon-4.3.26/xymonnet/contest.c:486: undefined reference to SSLv3_client_method'
collect2: error: ld returned 1 exit status
Makefile:33: recipe for target 'xymonnet' failed
make[1]: *** [xymonnet] Error 1
make[1]: Leaving directory '/home/xymon/xymon-4.3.26/xymonnet'
build/Makefile.rules:102: recipe for target 'xymonnet-build' failed
make: *** [xymonnet-build] Error 2
Any suggestions?
Do you have openssl_devel installed?
-----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Matthew Daubenspeck Sent: Friday, March 18, 2016 8:45 AM To: xymon at xymon.com Subject: [Xymon] 4.3.26 build fail
I'm sure I'm missing something simple, but trying to compile 4.3.26 fails:
gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -DLINUX -I/home/xymon/xymon-4.3.26/include -o
xymonnet -Wl,--rpath, xymonnet.o contest.o httptest.o httpresult.o
ldaptest.o dns.o dns2.o httpcookies.o -lcares ../lib/libxymontime.a
../lib/libxymoncomm.a -lssl -lcrypto ../lib/libxymon.a -lpcre
contest.o: In function setup_ssl': /home/xymon/xymon-4.3.26/xymonnet/contest.c:486: undefined reference to SSLv3_client_method'
collect2: error: ld returned 1 exit status
Makefile:33: recipe for target 'xymonnet' failed
make[1]: *** [xymonnet] Error 1
make[1]: Leaving directory '/home/xymon/xymon-4.3.26/xymonnet'
build/Makefile.rules:102: recipe for target 'xymonnet-build' failed
make: *** [xymonnet-build] Error 2
Any suggestions?
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
On Fri, Mar 18, 2016 at 02:32:32PM +0000, Root, Paul T wrote:
Do you have openssl_devel installed?
-----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Matthew Daubenspeck Sent: Friday, March 18, 2016 8:45 AM To: xymon at xymon.com Subject: [Xymon] 4.3.26 build fail
I'm sure I'm missing something simple, but trying to compile 4.3.26 fails:
gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DLINUX -I/home/xymon/xymon-4.3.26/include -o xymonnet -Wl,--rpath, xymonnet.o contest.o httptest.o httpresult.o ldaptest.o dns.o dns2.o httpcookies.o -lcares ../lib/libxymontime.a ../lib/libxymoncomm.a -lssl -lcrypto ../lib/libxymon.a -lpcre contest.o: In function
setup_ssl': /home/xymon/xymon-4.3.26/xymonnet/contest.c:486: undefined reference toSSLv3_client_method' collect2: error: ld returned 1 exit status Makefile:33: recipe for target 'xymonnet' failed make[1]: *** [xymonnet] Error 1 make[1]: Leaving directory '/home/xymon/xymon-4.3.26/xymonnet' build/Makefile.rules:102: recipe for target 'xymonnet-build' failed make: *** [xymonnet-build] Error 2
Yes, on Arch Linux, openssl is installed. It's worked perfectly with many previous versions.
On Fri, March 18, 2016 7:51 am, Matthew Daubenspeck wrote:
On Fri, Mar 18, 2016 at 02:32:32PM +0000, Root, Paul T wrote:
Do you have openssl_devel installed?
-----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Matthew Daubenspeck Sent: Friday, March 18, 2016 8:45 AM To: xymon at xymon.com Subject: [Xymon] 4.3.26 build fail
I'm sure I'm missing something simple, but trying to compile 4.3.26 fails:
gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DLINUX -I/home/xymon/xymon-4.3.26/include -o xymonnet -Wl,--rpath, xymonnet.o contest.o httptest.o httpresult.o ldaptest.o dns.o dns2.o httpcookies.o -lcares ../lib/libxymontime.a ../lib/libxymoncomm.a -lssl -lcrypto ../lib/libxymon.a -lpcre contest.o: In function
setup_ssl': /home/xymon/xymon-4.3.26/xymonnet/contest.c:486: undefined reference toSSLv3_client_method' collect2: error: ld returned 1 exit status Makefile:33: recipe for target 'xymonnet' failed make[1]: *** [xymonnet] Error 1 make[1]: Leaving directory '/home/xymon/xymon-4.3.26/xymonnet' build/Makefile.rules:102: recipe for target 'xymonnet-build' failed make: *** [xymonnet-build] Error 2Yes, on Arch Linux, openssl is installed. It's worked perfectly with many previous versions.
Dumb question, but does 'openssl' include the development files as well then on Arch? (Presumably, since it's worked before for you.)
Is it possible this is related to mitigation for DROWN or another openssl issue taken within Arch to disable SSLv3? I seem to recall a recent set of updates causing some unexpected ABI changes (functions disappearing without any stub replacements) on several distributions.
Can you see if a previous known-working release tarball recompiles successfully on this system?
Regards, -jc
On Fri, Mar 18, 2016 at 10:40:00AM -0700, J.C. Cleaver wrote:
Dumb question, but does 'openssl' include the development files as well then on Arch? (Presumably, since it's worked before for you.)
Yes it does. Package contents can be seen here if necessary:
https://www.archlinux.org/packages/core/x86_64/openssl/files/
Is it possible this is related to mitigation for DROWN or another openssl issue taken within Arch to disable SSLv3? I seem to recall a recent set of updates causing some unexpected ABI changes (functions disappearing without any stub replacements) on several distributions.
I am assuming you are correct. They have a git commit commented with "Let's try without SSLv3, too" on 2016-03-01.
Can you see if a previous known-working release tarball recompiles successfully on this system?
Just tried the already installed version, 4.3.24, and it fails the exact same way.
On Fri, March 18, 2016 10:51 am, Matthew Daubenspeck wrote:
On Fri, Mar 18, 2016 at 10:40:00AM -0700, J.C. Cleaver wrote:
Dumb question, but does 'openssl' include the development files as well then on Arch? (Presumably, since it's worked before for you.)
Yes it does. Package contents can be seen here if necessary:
https://www.archlinux.org/packages/core/x86_64/openssl/files/
Is it possible this is related to mitigation for DROWN or another openssl issue taken within Arch to disable SSLv3? I seem to recall a recent set of updates causing some unexpected ABI changes (functions disappearing without any stub replacements) on several distributions.
I am assuming you are correct. They have a git commit commented with "Let's try without SSLv3, too" on 2016-03-01.
Can you see if a previous known-working release tarball recompiles successfully on this system?
Just tried the already installed version, 4.3.24, and it fails the exact same way.
Ahh, that would explain it then.
Can you see if this patch lets you build successfully?
-jc
On Fri, Mar 18, 2016 at 11:32:34AM -0700, J.C. Cleaver wrote:
Ahh, that would explain it then.
Can you see if this patch lets you build successfully?
-jc
patching file xymonnet/contest.c patching file configure.server patching file build/ssl.sh patching file build/test-ssl3.c patching file build/Makefile.test-ssl3 patch unexpectedly ends in middle of line patch: **** malformed patch at line 114:
Did I patch it wrong?
On Fri, March 18, 2016 11:51 am, Matthew Daubenspeck wrote:
On Fri, Mar 18, 2016 at 11:32:34AM -0700, J.C. Cleaver wrote:
Ahh, that would explain it then.
Can you see if this patch lets you build successfully?
-jc
patching file xymonnet/contest.c patching file configure.server patching file build/ssl.sh patching file build/test-ssl3.c patching file build/Makefile.test-ssl3 patch unexpectedly ends in middle of line patch: **** malformed patch at line 114:
Did I patch it wrong?
Hmm. It's possible something went odd encoding-wise, but as long as the final lines of build/Makefile.test-ssl3 are:
clean: @rm -f test-ssl3.o test-ssl3
, then you should be fine. It's an svn diff and those last two are new files.
-jc
On 3/18/2016 10:51 AM, Matthew Daubenspeck wrote:
On Fri, Mar 18, 2016 at 11:32:34AM -0700, J.C. Cleaver wrote:
Ahh, that would explain it then.
Can you see if this patch lets you build successfully?
-jc
patching file xymonnet/contest.c patching file configure.server patching file build/ssl.sh patching file build/test-ssl3.c patching file build/Makefile.test-ssl3 patch unexpectedly ends in middle of line patch: **** malformed patch at line 114:
Did I patch it wrong?
I suspect you have a truncated patch file. The attached text is 115 lines long.
-- Do things because you should, not just because you can.
John Thurston 907-465-8591 John.Thurston at alaska.gov Enterprise Technology Services Department of Administration State of Alaska
On Fri, Mar 18, 2016 at 11:28:40AM -0800, John Thurston wrote:
patching file xymonnet/contest.c patching file configure.server patching file build/ssl.sh patching file build/test-ssl3.c patching file build/Makefile.test-ssl3 patch unexpectedly ends in middle of line patch: **** malformed patch at line 114:
Did I patch it wrong?
I suspect you have a truncated patch file. The attached text is 115 lines long.
I must be doing something wrong then. I downloaded the patch directly from the user list archives, and get the same error. Line 115 has nothing but a + and a blank line. I tried the patch attachment via mutt, and downloading it via here:
The attachment.bin from that link is 115 lines, but does not have a newline at the end of the 115th line. There have been a lot of versions of "patch" commands, and not all of them may be equally tolerant.
You could try getting a fresh copy of attachment.bin, and then modifying it by adding the newline echo >>attachment.bin
and then using that.
I don't recall having any problems, but I'm working on a Mac, which may have a different version of "patch" than what you're using.
On Mon, Mar 21, 2016 at 9:40 AM, Matthew Daubenspeck <matt at oddprocess.org> wrote:
On Fri, Mar 18, 2016 at 11:28:40AM -0800, John Thurston wrote:
patching file xymonnet/contest.c patching file configure.server patching file build/ssl.sh patching file build/test-ssl3.c patching file build/Makefile.test-ssl3 patch unexpectedly ends in middle of line patch: **** malformed patch at line 114:
Did I patch it wrong?
I suspect you have a truncated patch file. The attached text is 115 lines long.
I must be doing something wrong then. I downloaded the patch directly from the user list archives, and get the same error. Line 115 has nothing but a + and a blank line. I tried the patch attachment via mutt, and downloading it via here:
http://lists.xymon.com/archive/2016-March/043228.html
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Oops, my server is on Solaris 11 , not on a Mac; I would have been using GNU patch 2.7.5 probably. But I might have gotten the patch a different way (or even just copy/pasted it) when I got it.
On Mon, Mar 21, 2016 at 12:12 PM, Richard Hamilton <rlhamil2 at gmail.com> wrote:
The attachment.bin from that link is 115 lines, but does not have a newline at the end of the 115th line. There have been a lot of versions of "patch" commands, and not all of them may be equally tolerant.
You could try getting a fresh copy of attachment.bin, and then modifying it by adding the newline echo >>attachment.bin
and then using that.
I don't recall having any problems, but I'm working on a Mac, which may have a different version of "patch" than what you're using.
On Mon, Mar 21, 2016 at 9:40 AM, Matthew Daubenspeck <matt at oddprocess.org> wrote:
On Fri, Mar 18, 2016 at 11:28:40AM -0800, John Thurston wrote:
patching file xymonnet/contest.c patching file configure.server patching file build/ssl.sh patching file build/test-ssl3.c patching file build/Makefile.test-ssl3 patch unexpectedly ends in middle of line patch: **** malformed patch at line 114:
Did I patch it wrong?
I suspect you have a truncated patch file. The attached text is 115 lines long.
I must be doing something wrong then. I downloaded the patch directly from the user list archives, and get the same error. Line 115 has nothing but a + and a blank line. I tried the patch attachment via mutt, and downloading it via here:
http://lists.xymon.com/archive/2016-March/043228.html
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
On Mon, Mar 21, 2016 at 12:12:58PM -0400, Richard Hamilton wrote:
The attachment.bin from that link is 115 lines, but does not have a newline at the end of the 115th line. There have been a lot of versions of "patch" commands, and not all of them may be equally tolerant. You could try getting a fresh copy of attachment.bin, and then modifying it by adding the newline echo >>attachment.bin and then using that. I don't recall having any problems, but I'm working on a Mac, which may have a different version of "patch" than what you're using.
That worked, thanks a ton! Patched and compiled cleanly. Thanks for the help!
On Mon, March 21, 2016 10:42 am, Matthew Daubenspeck wrote:
On Mon, Mar 21, 2016 at 12:12:58PM -0400, Richard Hamilton wrote:
The attachment.bin from that link is 115 lines, but does not have a newline at the end of the 115th line.Ã There have been a lot of versions of "patch" commands, and not all of them may be equally tolerant. You could try getting a fresh copy of attachment.bin, and then modifying it by adding the newline echo >>attachment.bin and then using that. I don't recall having any problems, but I'm working on a Mac, which may have a different version of "patch" than what you're using.
That worked, thanks a ton! Patched and compiled cleanly. Thanks for the help!
Hi,
Just to confirm, there don't seem to be any issues at runtime either on the SSLv3-less system?
-jc
On Tue, March 22, 2016 7:15 am, Matthew Daubenspeck wrote:
On Mon, Mar 21, 2016 at 11:53:59AM -0700, J.C. Cleaver wrote:
Hi,
Just to confirm, there don't seem to be any issues at runtime either on the SSLv3-less system?
-jc
Correct. Compiled, installed, and is running fine on my devel server.
Perfect! Thanks for the confirmation.
-jc
participants (5)
-
cleaver＠terabithia.org
-
john.thurston＠alaska.gov
-
matt＠oddprocess.org
-
Paul.Root＠CenturyLink.com
-
rlhamil2＠gmail.com