Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
Bruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
Hi all,
Has anyone else seen this issue with their installation of xymon?
......Bruce
Bruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
From: White, Bruce [mailto:bewhite at fellowes.com] Sent: Friday, January 08, 2010 2:43 PM To: hobbit at hswn.dk Subject: [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
Bruce White
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
Maybe the FF 3.5 bug?
On 1/14/10, White, Bruce <bewhite at fellowes.com> wrote:
Hi all,
Has anyone else seen this issue with their installation of xymon?
......BruceBruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
From: White, Bruce [mailto:bewhite at fellowes.com] Sent: Friday, January 08, 2010 2:43 PM To: hobbit at hswn.dk Subject: [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
Bruce White
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
"The secret to creativity is knowing how to hide your sources." --- Albert Einstein
Josh,
What is the FF 3.5 bug?
.....Bruce
Bruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Thursday, January 14, 2010 4:36 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Problem with graph zoom on Network times
Maybe the FF 3.5 bug?
On 1/14/10, White, Bruce <bewhite at fellowes.com> wrote:
Hi all,
Has anyone else seen this issue with their installation of xymon?
......BruceBruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
From: White, Bruce [mailto:bewhite at fellowes.com] Sent: Friday, January 08, 2010 2:43 PM To: hobbit at hswn.dk Subject: [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
Bruce White
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
"The secret to creativity is knowing how to hide your sources." --- Albert Einstein
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
"The secret to creativity is knowing how to hide your sources." --- Albert Einstein
On Thu, Jan 14, 2010 at 6:31 PM, White, Bruce <bewhite at fellowes.com> wrote:
Josh,
What is the FF 3.5 bug?
.....Bruce
Bruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Thursday, January 14, 2010 4:36 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Problem with graph zoom on Network times
Maybe the FF 3.5 bug?
On 1/14/10, White, Bruce <bewhite at fellowes.com> wrote:
Hi all,
Has anyone else seen this issue with their installation of xymon?
......BruceBruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
From: White, Bruce [mailto:bewhite at fellowes.com] Sent: Friday, January 08, 2010 2:43 PM To: hobbit at hswn.dk Subject: [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
Bruce White
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
"The secret to creativity is knowing how to hide your sources." --- Albert Einstein
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
What is the FF 3.5 bug?
No, it's not that.
Bruce, yes I get the same problem.
Malcolm
-- Technical copy-editor & proofreader
KDE Proofreading Team KDE British English Translation Team
http://l10n.kde.org/team-infos.php?teamcode=en_GB
Facebook: http://www.facebook.com/FriendlyAtheist
Preisknaller: GMX DSL Flatrate für nur 16,99 Euro/mtl.! http://portal.gmx.net/de/go/dsl02
I can confirm the same behaviour w/ xymon-4.3.0 snapshot as of 2010-01-08.
Running on 32-bit Gentoo w/ rrdtool-1.3.8 Browser: seamonkey 1.1.18 on linux.
Same behaviour in a slightly different setup w/ 4.3.0_beta2 w/ FF 3.5.4.
AFAIR the FF 3.5 bug results in a completely blue graph, so this is something different.
Cheers,
Thomas
On Fri, 15 Jan 2010, Malcolm Hunter wrote:
What is the FF 3.5 bug?
No, it's not that.
Bruce, yes I get the same problem.
Malcolm
| IT-Beratung Eckert | Hartkirchweg 54 | fon: +49 (0)761/ 594 9898 | Thomas Eckert | 79111 Freiburg i.Br. | fax: +49 (0)761/ 594 9899 | | Germany | http://www.it-eckert.de/
Bruce,
I can confirm the same behaviour w/ xymon-4.3.0 snapshot as of 2010-01-08.
Running on Gentoo, vanilla-kernel: $ uname -r; epm -q rrdtool 2.6.31.1-install rrdtool-1.3.8 Browser: seamonkey 1.1.18 on linux (so most likely not a FF 3.5 bug).
Same behaviour in a slightly different setup w/ 4.3.0_beta2 w/ FF 3.5.4.
Cheers,
Thomas
White, Bruce wrote:
Hi all,
Has anyone else seen this issue with their installation of xymon?
……Bruce*Bruce White*
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
**Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
*From:* White, Bruce [mailto:bewhite at fellowes.com] *Sent:* Friday, January 08, 2010 2:43 PM *To:* hobbit at hswn.dk *Subject:* [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
**Bruce White**
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
Thought I had reported this to the list ;-) For the y-axis, the method parseFloat should be used instead of parseInt in zoom.js. [bb at iris web]$ pwd /soft/pub/BB/hobbit/server/web [bb at iris web]$ diff -u zoom.js.dist zoom.js --- zoom.js.dist Fri Mar 27 11:03:32 2009 +++ zoom.js Wed Apr 8 15:00:06 2009 @@ -587,8 +587,8 @@ graphStart = parseInt(gUrlObj.getUrlParameterValue("graph_start")); graphEnd = parseInt(gUrlObj.getUrlParameterValue("graph_end")); - graphTop = parseInt(gUrlObj.getUrlParameterValue("upper")); - graphBottom = parseInt(gUrlObj.getUrlParameterValue("lower")); + graphTop = parseFloat(gUrlObj.getUrlParameterValue("upper")); + graphBottom = parseFloat(gUrlObj.getUrlParameterValue("lower")); haveGraphLimits = (gUrlObj.getUrlParameterValue("upper") != undefined) && (gUrlObj.getUrlParameterValue("lower") != undefined); idxStr = ""; Dominique Thomas Eckert wrote:
Bruce,
I can confirm the same behaviour w/ xymon-4.3.0 snapshot as of 2010-01-08.
Running on Gentoo, vanilla-kernel: $ uname -r; epm -q rrdtool 2.6.31.1-install rrdtool-1.3.8 Browser: seamonkey 1.1.18 on linux (so most likely not a FF 3.5 bug).
Same behaviour in a slightly different setup w/ 4.3.0_beta2 w/ FF 3.5.4.
Cheers,
Thomas
White, Bruce wrote:
Hi all,
Has anyone else seen this issue with their installation of xymon?
……Bruce
*Bruce White*
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
**Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
------------------------------------------------------------------------
*From:* White, Bruce [mailto:bewhite at fellowes.com] *Sent:* Friday, January 08, 2010 2:43 PM *To:* hobbit at hswn.dk *Subject:* [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
**Bruce White**
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
I am running 4.3.0.0-beta2 and I too have the same zoom.js, although I see no difference when I modify. Do I have to restart my server? Does this now get entered into the latest version? .vadim
Thought I had reported this to the list ;-) For the y-axis, the method parseFloat should be used instead of parseInt in zoom.js.
[bb at iris web]$ pwd /soft/pub/BB/hobbit/server/web
[bb at iris web]$ diff -u zoom.js.dist zoom.js --- zoom.js.dist Fri Mar 27 11:03:32 2009 +++ zoom.js Wed Apr 8 15:00:06 2009 @@ -587,8 +587,8 @@
graphStart = parseInt(gUrlObj.getUrlParameterValue("graph_start")); graphEnd = parseInt(gUrlObj.getUrlParameterValue("graph_end")); - graphTop = parseInt(gUrlObj.getUrlParameterValue("upper")); - graphBottom = parseInt(gUrlObj.getUrlParameterValue("lower")); + graphTop = parseFloat(gUrlObj.getUrlParameterValue("upper")); + graphBottom = parseFloat(gUrlObj.getUrlParameterValue("lower")); haveGraphLimits = (gUrlObj.getUrlParameterValue("upper") != undefined) && (gUrlObj.getUrlParameterValue("lower") != undefined);
idxStr = "";
Dominique
Thomas Eckert wrote:
Bruce,
I can confirm the same behaviour w/ xymon-4.3.0 snapshot as of 2010-01-08.
Running on Gentoo, vanilla-kernel: $ uname -r; epm -q rrdtool 2.6.31.1-install rrdtool-1.3.8 Browser: seamonkey 1.1.18 on linux (so most likely not a FF 3.5 bug).
Same behaviour in a slightly different setup w/ 4.3.0_beta2 w/ FF 3.5.4.
Cheers,
Thomas
White, Bruce wrote:
Hi all,
Has anyone else seen this issue with their installation of xymon?
……Bruce
*Bruce White*
*From:* White, Bruce [mailto:bewhite at fellowes.com] *Sent:* Friday, January 08, 2010 2:43 PM *To:* hobbit at hswn.dk *Subject:* [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
Try a restart of your browser session. I applied the fix and it worked first time with a fresh browser session. Bruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/ Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc. -----Original Message----- From: wiskbroom at hotmail.com [mailto:wiskbroom at hotmail.com] Sent: Friday, January 15, 2010 8:14 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Problem with graph zoom on Network times I am running 4.3.0.0-beta2 and I too have the same zoom.js, although I see no difference when I modify. Do I have to restart my server? Does this now get entered into the latest version? .vadim
Thought I had reported this to the list ;-) For the y-axis, the method parseFloat should be used instead of parseInt in zoom.js.
[bb at iris web]$ pwd /soft/pub/BB/hobbit/server/web
[bb at iris web]$ diff -u zoom.js.dist zoom.js --- zoom.js.dist Fri Mar 27 11:03:32 2009 +++ zoom.js Wed Apr 8 15:00:06 2009 @@ -587,8 +587,8 @@
graphStart = parseInt(gUrlObj.getUrlParameterValue("graph_start")); graphEnd = parseInt(gUrlObj.getUrlParameterValue("graph_end")); - graphTop = parseInt(gUrlObj.getUrlParameterValue("upper")); - graphBottom = parseInt(gUrlObj.getUrlParameterValue("lower")); + graphTop = parseFloat(gUrlObj.getUrlParameterValue("upper")); + graphBottom = parseFloat(gUrlObj.getUrlParameterValue("lower")); haveGraphLimits = (gUrlObj.getUrlParameterValue("upper") != undefined) && (gUrlObj.getUrlParameterValue("lower") != undefined);
idxStr = "";
Dominique
Thomas Eckert wrote:
Bruce,
I can confirm the same behaviour w/ xymon-4.3.0 snapshot as of 2010-01-08.
Running on Gentoo, vanilla-kernel: $ uname -r; epm -q rrdtool 2.6.31.1-install rrdtool-1.3.8 Browser: seamonkey 1.1.18 on linux (so most likely not a FF 3.5 bug).
Same behaviour in a slightly different setup w/ 4.3.0_beta2 w/ FF 3.5.4.
Cheers,
Thomas
White, Bruce wrote:
Hi all,
Has anyone else seen this issue with their installation of xymon?
......Bruce
*Bruce White*
*From:* White, Bruce [mailto:bewhite at fellowes.com] *Sent:* Friday, January 08, 2010 2:43 PM *To:* hobbit at hswn.dk *Subject:* [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Much nicer, yes! Thank you, and thank you Dominique!
Try a restart of your browser session. I applied the fix and it worked first time with a fresh browser session.
Bruce White
-----Original Message----- From: wiskbroom at hotmail.com [mailto:wiskbroom at hotmail.com] Sent: Friday, January 15, 2010 8:14 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Problem with graph zoom on Network times
I am running 4.3.0.0-beta2 and I too have the same zoom.js, although I see no difference when I modify. Do I have to restart my server? Does this now get entered into the latest version?
.vadim
Thought I had reported this to the list ;-) For the y-axis, the method parseFloat should be used instead of parseInt in zoom.js.
[bb at iris web]$ pwd /soft/pub/BB/hobbit/server/web
[bb at iris web]$ diff -u zoom.js.dist zoom.js --- zoom.js.dist Fri Mar 27 11:03:32 2009 +++ zoom.js Wed Apr 8 15:00:06 2009 @@ -587,8 +587,8 @@
graphStart = parseInt(gUrlObj.getUrlParameterValue("graph_start")); graphEnd = parseInt(gUrlObj.getUrlParameterValue("graph_end")); - graphTop = parseInt(gUrlObj.getUrlParameterValue("upper")); - graphBottom = parseInt(gUrlObj.getUrlParameterValue("lower")); + graphTop = parseFloat(gUrlObj.getUrlParameterValue("upper")); + graphBottom = parseFloat(gUrlObj.getUrlParameterValue("lower")); haveGraphLimits = (gUrlObj.getUrlParameterValue("upper") != undefined) && (gUrlObj.getUrlParameterValue("lower") != undefined);
idxStr = "";
Dominique
Thomas Eckert wrote:
Bruce,
I can confirm the same behaviour w/ xymon-4.3.0 snapshot as of 2010-01-08.
Running on Gentoo, vanilla-kernel: $ uname -r; epm -q rrdtool 2.6.31.1-install rrdtool-1.3.8 Browser: seamonkey 1.1.18 on linux (so most likely not a FF 3.5 bug).
Same behaviour in a slightly different setup w/ 4.3.0_beta2 w/ FF 3.5.4.
Cheers,
Thomas
White, Bruce wrote:
Hi all,
Has anyone else seen this issue with their installation of xymon?
......Bruce
*From:* White, Bruce [mailto:bewhite at fellowes.com] *Sent:* Friday, January 08, 2010 2:43 PM *To:* hobbit at hswn.dk *Subject:* [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
Thanks all for confirming it was not just something in my installation. Dominique - I made the changes to my zoom.js file and it appears to have fixed the issue. Thanks for the fix! .....Bruce Bruce White Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | http://www.fellowes.com/ Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc. -----Original Message----- From: Dominique Frise [mailto:dominique.frise at unil.ch] Sent: Friday, January 15, 2010 1:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Problem with graph zoom on Network times Thought I had reported this to the list ;-) For the y-axis, the method parseFloat should be used instead of parseInt in zoom.js. [bb at iris web]$ pwd /soft/pub/BB/hobbit/server/web [bb at iris web]$ diff -u zoom.js.dist zoom.js --- zoom.js.dist Fri Mar 27 11:03:32 2009 +++ zoom.js Wed Apr 8 15:00:06 2009 @@ -587,8 +587,8 @@ graphStart = parseInt(gUrlObj.getUrlParameterValue("graph_start")); graphEnd = parseInt(gUrlObj.getUrlParameterValue("graph_end")); - graphTop = parseInt(gUrlObj.getUrlParameterValue("upper")); - graphBottom = parseInt(gUrlObj.getUrlParameterValue("lower")); + graphTop = parseFloat(gUrlObj.getUrlParameterValue("upper")); + graphBottom = parseFloat(gUrlObj.getUrlParameterValue("lower")); haveGraphLimits = (gUrlObj.getUrlParameterValue("upper") != undefined) && (gUrlObj.getUrlParameterValue("lower") != undefined); idxStr = ""; Dominique Thomas Eckert wrote:
Bruce,
I can confirm the same behaviour w/ xymon-4.3.0 snapshot as of 2010-01-08.
Running on Gentoo, vanilla-kernel: $ uname -r; epm -q rrdtool 2.6.31.1-install rrdtool-1.3.8 Browser: seamonkey 1.1.18 on linux (so most likely not a FF 3.5 bug).
Same behaviour in a slightly different setup w/ 4.3.0_beta2 w/ FF 3.5.4.
Cheers,
Thomas
White, Bruce wrote:
Hi all,
Has anyone else seen this issue with their installation of xymon?
......Bruce
*Bruce White*
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
**Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
--------------------------------------------------------------------- ---
*From:* White, Bruce [mailto:bewhite at fellowes.com] *Sent:* Friday, January 08, 2010 2:43 PM *To:* hobbit at hswn.dk *Subject:* [hobbit] Problem with graph zoom on Network times
Hi all,
I just noticed an issue with zooming into graphs of my ping time. When I zoom in, it loses the y-axis value of milliseconds and presents the data in just seconds. So what was a set of valleys and peaks becomes a straight line. I did a couple of searches of the archive, but have not found anyone reporting this issue. I am running Xymon 4.3.0-0.beta2 on a RedHat AS 5.2 server running 1.2.23 of the rrdtool. I am attaching png files of the graph before (conntime) and after the zoom (connzoom). It seems to be a problem with any of the graphs where the y-axiz is in milliseconds (TCP connection Time, bbgen run time, etc.). Has anyone else seen this issue?
Thanks,
Bruce
**Bruce White**
Senior Enterprise Systems Engineer | Phone: 630-671-5169 | Fax: 630-893-1648 | bewhite at fellowes.com | www.fellowes.com <http://www.fellowes.com/>
Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
participants (7)
-
bewhite@fellowes.com
-
dominique.frise@unil.ch
-
josh@imaginenetworksllc.com
-
malcolm.hunter@gmx.co.uk
-
thomas.eckert@IT-Eckert.de
-
tom@IT-Eckert.de
-
wiskbroom@hotmail.com