That's not what I was saying...I was pointing out that Eric has included a perl script with a couple of his monitors that does what you are looking for.

=G=

From: Klomp, H. [mailto:klomph at nlr.nl] Sent: Tuesday, September 11, 2007 9:13 AM To: hobbit at hswn.dk Subject: RE: [hobbit] How to graph RRD data from DEVMON

Thanks for your answer, but I know that there are some scripts what I can use to monitor network interfaces of routers and switches.

I would like to use devmon instead, because with devmon I don't have to know which interfaces I must monitor, devmon will do if for me.

But How to get this information into a rrd graph ?

There is a document from xbgmsharp on the mailing list (http://permalink.gmane.org/gmane.comp.monitoring.hobbit/10245) which describes how to if_* grpah from devmon to hobbit. In this document he mentions the extra-rrd.pl file. But I can't get it working.

Is there anyone who knows of this file, of knows how to get it working ?

regards,

Bert

From: Galen Johnson [mailto:Galen.Johnson at sas.com] 
Sent: dinsdag 11 september 2007 14:41
To: hobbit at hswn.dk
Subject: RE: [hobbit] How to graph RRD data from DEVMON

Not sure what the extra-rrd.pl script is but on The Shire, Eric

Meddaugh has a couple of monitors (zonestat, for instance) that includes a perl script that probably can be used either as is or at least as a baseline.

=G=

 

From: Klomp, H. [mailto:klomph at nlr.nl] 
Sent: Tuesday, September 11, 2007 5:38 AM
To: hobbit at hswn.dk
Subject: [hobbit] How to graph RRD data from DEVMON

 

I would like to create graphs from the devmon output of cisco

switches. For this, I found a document "How to if_* grpah from Devmon to Hobbit".

However I can't find the extra-rrd.pl program 

Is there anyone outthere who is able to tell me how to use the

data from devmon to create a rrd graph ?

Regards, 

Bert Klomp 
NLR 

Thank's to all for your help.

Galen, you are right, Eric has some simaler scripts at the shire.

I wil try to setup the rrd graphs with this script and inform you on my progress.

Regards,

Bert

-----Original Message----- From: Trent Melcher [mailto:trent.melcher at sitel.com] Sent: dinsdag 11 september 2007 15:34 To: hobbit at hswn.dk Subject: RE: [hobbit] How to graph RRD data from DEVMON

Here is the extra-rrd.pl script, give Thanks to KaYa (xbgmsharp at gmail.com) for sending this to me originally. I put just the if_load test in the script however you can add more for other graphs, I have about 15 other stats that I graph this way now. Mostly for our oracle databases.

------------cut------------------ #!/usr/bin/perl

Input parameters: Hostname, testname (column), and messagefile

#$HOSTNAME=$ARGV[0]; ; $TESTNAME=$ARGV[1]; ; $FNAME=$ARGV[2]; ; $filename="/tmp/if_log";

Read the entire files

open (FILEHANDLE,$FNAME) || die ("cant read file\n"); @input = <FILEHANDLE>; close (FILEHANDLE);

if ( $TESTNAME eq "if_load") {

       # Analyze the message we got
       open(OUT, ">", $filename);
       foreach $line (@input) {
               if ($line =~ /(^[A-Z].*) (\d+):(\d+)$/ ) {
                       # The RRD dataset definitions
                       print "DS:in:DERIVE:600:0:U\n";
                       print "DS:out:DERIVE:600:0:U\n";

                       # The filename
                       print "if_load_$1.rrd\n";

                       # The data
                       print "$2:$3\n";
               }
       }
    close (OUT);

} ------------cut------------------

HTH

Trent

On Tue, 2007-09-11 at 15:12 +0200, Klomp, H. wrote:

Thanks for your answer, but I know that there are some scripts what I can use to monitor network interfaces of routers and switches. I would like to use devmon instead, because with devmon I don't have to know which interfaces I must monitor, devmon will do if for me. But How to get this information into a rrd graph ?

There is a document from xbgmsharp on the mailing list (http://permalink.gmane.org/gmane.comp.monitoring.hobbit/10245) which describes how to if_* grpah from devmon to hobbit. In this document he mentions the extra-rrd.pl file. But I can't get it working.

Is there anyone who knows of this file, of knows how to get it working ?

regards,

Bert

    ______________________________________________________________
    From: Galen Johnson [mailto:Galen.Johnson at sas.com] 
    Sent: dinsdag 11 september 2007 14:41
    To: hobbit at hswn.dk
    Subject: RE: [hobbit] How to graph RRD data from DEVMON
    
    
    
    Not sure what the extra-rrd.pl script is but on The Shire,
    Eric Meddaugh has a couple of monitors (zonestat, for
    instance) that includes a perl script that probably can be
    used either as is or at least as a baseline.
    
     
    
    =G=
    
     
    
    From: Klomp, H. [mailto:klomph at nlr.nl] 
    Sent: Tuesday, September 11, 2007 5:38 AM
    To: hobbit at hswn.dk
    Subject: [hobbit] How to graph RRD data from DEVMON
    
    
     
    
    I would like to create graphs from the devmon output of cisco
    switches. For this, I found a document "How to if_* grpah from
    Devmon to Hobbit". 
    
    However I can't find the extra-rrd.pl program 
    
    Is there anyone outthere who is able to tell me how to use the
    data from devmon to create a rrd graph ? 
    
    Regards, 
    
    Bert Klomp 
    NLR 
    
    

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

Again, thank you all for your help. I have the graphs I wanted.

Regards,

Bert

-----Original Message----- From: Eric Meddaugh [mailto:etmsys at rit.edu] Sent: dinsdag 11 september 2007 15:44 To: hobbit at hswn.dk Subject: RE: [hobbit] How to graph RRD data from DEVMON

I made the perl script to handle multiple inputs from other "data" providers. It'd flexible enough that should be able to handle most data sent to it. There is a certain "format" you'd need to follow to use it, but it can be modified to fit most everything.

I wrote it since only one data reader is allowed to be defined and must be able to handle all the different data types sent to it.

---Eric

-----Original Message----- From: Klomp, H. [mailto:klomph at nlr.nl] Sent: Tuesday, September 11, 2007 09:38 To: hobbit at hswn.dk Subject: RE: [hobbit] How to graph RRD data from DEVMON

Thank's to all for your help.

Galen, you are right, Eric has some simaler scripts at the shire.

I wil try to setup the rrd graphs with this script and inform you on my progress.

Regards,

Bert

-----Original Message----- From: Trent Melcher [mailto:trent.melcher at sitel.com] Sent: dinsdag 11 september 2007 15:34 To: hobbit at hswn.dk Subject: RE: [hobbit] How to graph RRD data from DEVMON

Here is the extra-rrd.pl script, give Thanks to KaYa (xbgmsharp at gmail.com) for sending this to me originally. I put just the if_load test in the script however you can add more for other graphs, I have about 15 other stats that I graph this way now. Mostly for our oracle databases.

------------cut------------------ #!/usr/bin/perl

Input parameters: Hostname, testname (column), and messagefile

#$HOSTNAME=$ARGV[0]; ; $TESTNAME=$ARGV[1]; ; $FNAME=$ARGV[2]; ; $filename="/tmp/if_log";

Read the entire files

open (FILEHANDLE,$FNAME) || die ("cant read file\n"); @input = <FILEHANDLE>; close (FILEHANDLE);

if ( $TESTNAME eq "if_load") {

       # Analyze the message we got
       open(OUT, ">", $filename);
       foreach $line (@input) {
               if ($line =~ /(^[A-Z].*) (\d+):(\d+)$/ ) {
                       # The RRD dataset definitions
                       print "DS:in:DERIVE:600:0:U\n";
                       print "DS:out:DERIVE:600:0:U\n";

                       # The filename
                       print "if_load_$1.rrd\n";

                       # The data
                       print "$2:$3\n";
               }
       }
    close (OUT);

} ------------cut------------------

HTH

Trent

On Tue, 2007-09-11 at 15:12 +0200, Klomp, H. wrote:

Thanks for your answer, but I know that there are some scripts what I can use to monitor network interfaces of routers and switches. I would like to use devmon instead, because with devmon I don't have to know which interfaces I must monitor, devmon will do if for me. But How to get this information into a rrd graph ?

There is a document from xbgmsharp on the mailing list (http://permalink.gmane.org/gmane.comp.monitoring.hobbit/10245) which describes how to if_* grpah from devmon to hobbit. In this document he mentions the extra-rrd.pl file. But I can't get it working.

Is there anyone who knows of this file, of knows how to get it working ?

regards,

Bert

    ______________________________________________________________
    From: Galen Johnson [mailto:Galen.Johnson at sas.com] 
    Sent: dinsdag 11 september 2007 14:41
    To: hobbit at hswn.dk
    Subject: RE: [hobbit] How to graph RRD data from DEVMON
    
    
    
    Not sure what the extra-rrd.pl script is but on The Shire,
    Eric Meddaugh has a couple of monitors (zonestat, for
    instance) that includes a perl script that probably can be
    used either as is or at least as a baseline.
    
     
    
    =G=
    
     
    
    From: Klomp, H. [mailto:klomph at nlr.nl] 
    Sent: Tuesday, September 11, 2007 5:38 AM
    To: hobbit at hswn.dk
    Subject: [hobbit] How to graph RRD data from DEVMON
    
    
     
    
    I would like to create graphs from the devmon output of cisco
    switches. For this, I found a document "How to if_* grpah from
    Devmon to Hobbit". 
    
    However I can't find the extra-rrd.pl program 
    
    Is there anyone outthere who is able to tell me how to use the
    data from devmon to create a rrd graph ? 
    
    Regards, 
    
    Bert Klomp 
    NLR 
    
    

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

Hi Thomas,

Thomas Séglard wrote :

I'm just asking if some of you are using 'jstat' to monitor and graph datas about heap/gc. I'm using Tomcat 6 with jdk1.6 under debian linux. Thanks for your help.

I do, with tomcat 4/5, but it's mostly useless. I can send you the scripts privately if you wish.

-- Charles Goyard - charles.goyard at orange-ftgroup.com - (+33) 1 45 38 01 31 Orange Business Services - online multimedia // ingénierie

On 9/11/07, Charles Goyard <charles.goyard at orange-ftgroup.com> wrote:

Hi Thomas,

Thomas Séglard wrote :

...

I'm just asking if some of you are using 'jstat' to monitor and graph datas about heap/gc. I'm using Tomcat 6 with jdk1.6 under debian linux. Thanks for your help.

I do, with tomcat 4/5, but it's mostly useless. I can send you the scripts privately if you wish.

I am interested to look at it as well

-- Charles Goyard - charles.goyard at orange-ftgroup.com - (+33) 1 45 38 01 31 Orange Business Services - online multimedia // ingénierie

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk

-- Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu