Multiple graphs per column

Galen.Johnson＠sas.com

22 Sep 2015 22 Sep '15

9:45 p.m.

Has anyone gotten the multiple graphs per column to work? I tried using the example in the xymonserver.cfg file but it still only shows a single graph...for example, if I want the la graph and vmstat1 I should be able to add the line:

GRAPH_cpu="la,vmstat1"

As I understand it, that should give me both graphs when I click on the test. Did I just miss a step (yes, I restarted xymon)?

thanks

=G=

Show replies by date

rectifier＠gmail.com

22 Sep 22 Sep

10:44 p.m.

Did you use multigraphs option in cgioptions.cfg?

ex:

*CGI_SVC_OPTS=”… **--multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"*

On Tue, Sep 22, 2015 at 11:45 PM, Galen Johnson <Galen.Johnson at sas.com> wrote:

...

Has anyone gotten the multiple graphs per column to work? I tried using the example in the xymonserver.cfg file but it still only shows a single graph...for example, if I want the la graph and vmstat1 I should be able to add the line:

GRAPH_cpu="la,vmstat1"

As I understand it, that should give me both graphs when I click on the test. Did I just miss a step (yes, I restarted xymon)?

thanks

=G=

Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

cleaver＠terabithia.org

10:50 p.m.

Galen,

Actually, it's a documentation bug :/

The proper flag is "GRAPHS_[xxx]" (to mirror the general 'GRAPHS' variable). That *should* work for you going forward.

Thanks for catching this.

-jc

On 9/22/2015 3:44 PM, Steve B wrote:

...

Did you use multigraphs option in cgioptions.cfg?

ex: /CGI_SVC_OPTS=”… //--multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"/

On Tue, Sep 22, 2015 at 11:45 PM, Galen Johnson <Galen.Johnson at sas.com <mailto:Galen.Johnson at sas.com>> wrote:
Has anyone gotten the multiple graphs per column to work?  I tried
using the example in the xymonserver.cfg file but it still only
shows a single graph...for example, if I want the la graph and
vmstat1 I should be able to add the line:


GRAPH_cpu="la,vmstat1"


As I understand it, that should give me both graphs when I click
on the test.  Did I just miss a step (yes, I restarted xymon)?


thanks


=G=



_______________________________________________
Xymon mailing list
Xymon at xymon.com &lt;mailto:Xymon at xymon.com>
http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

Galen.Johnson＠sas.com

11:03 p.m.

Alrighty...it's "documented" in the xymonserver.cfg file :-). And for the sake of completeness, I only needed to fix that. Adding the multigraphs option didn't help in this case.

thanks

=G=

From: Japheth Cleaver <cleaver at terabithia.org> Sent: Tuesday, September 22, 2015 6:50 PM To: rectifier at gmail.com; Galen Johnson Cc: xymon at xymon.com Subject: Re: [Xymon] Multiple graphs per column

Galen,

Actually, it's a documentation bug :/

The proper flag is "GRAPHS_[xxx]" (to mirror the general 'GRAPHS' variable). That *should* work for you going forward.

Thanks for catching this.

-jc

On 9/22/2015 3:44 PM, Steve B wrote: Did you use multigraphs option in cgioptions.cfg?

ex:

CGI_SVC_OPTS="... --multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"

On Tue, Sep 22, 2015 at 11:45 PM, Galen Johnson <Galen.Johnson at sas.com<mailto:Galen.Johnson at sas.com>> wrote:

GRAPH_cpu="la,vmstat1"

As I understand it, that should give me both graphs when I click on the test. Did I just miss a step (yes, I restarted xymon)?

thanks

=G=

Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon

cleaver＠terabithia.org

11:21 p.m.

Yeah, that was definitely my error :) Fixed in r7674: https://sourceforge.net/p/xymon/code/7674/

Regards, -jc

On 9/22/2015 4:03 PM, Galen Johnson wrote:

...

Alrighty...it's "documented" in the xymonserver.cfg file :-). And for the sake of completeness, I only needed to fix that. Adding the multigraphs option didn't help in this case.

thanks

=G=

*From:* Japheth Cleaver <cleaver at terabithia.org> *Sent:* Tuesday, September 22, 2015 6:50 PM *To:* rectifier at gmail.com; Galen Johnson *Cc:* xymon at xymon.com *Subject:* Re: [Xymon] Multiple graphs per column Galen,

Actually, it's a documentation bug :/

The proper flag is "GRAPHS_[xxx]" (to mirror the general 'GRAPHS' variable). That *should* work for you going forward.

Thanks for catching this.

-jc

On 9/22/2015 3:44 PM, Steve B wrote:

...
Did you use multigraphs option in cgioptions.cfg?

ex: /CGI_SVC_OPTS=”… //--multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"/

On Tue, Sep 22, 2015 at 11:45 PM, Galen Johnson <Galen.Johnson at sas.com <mailto:Galen.Johnson at sas.com>> wrote:
Has anyone gotten the multiple graphs per column to work?  I
tried using the example in the xymonserver.cfg file but it still
only shows a single graph...for example, if I want the la graph
and vmstat1 I should be able to add the line:


GRAPH_cpu="la,vmstat1"


As I understand it, that should give me both graphs when I click
on the test.  Did I just miss a step (yes, I restarted xymon)?


thanks


=G=



_______________________________________________
Xymon mailing list
Xymon at xymon.com &lt;mailto:Xymon at xymon.com>
http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

Galen.Johnson＠sas.com

23 Sep 23 Sep

2:33 p.m.

Ok...running into a different issue. I'd like to define the GRAPHS for my test to do a single graph per entry...

As I understand it, it should follow this format

GRAPHS_omabasic="omabasic,omabasic1::1"

yet, when I go to the page, it tries to call the "omabasic1::1" graph instead of breaking it out to a single graph per line. Note, it shouldn't matter but these are NCVs.

=G=

From: Japheth Cleaver <cleaver at terabithia.org> Sent: Tuesday, September 22, 2015 7:21 PM To: Galen Johnson; rectifier at gmail.com Cc: xymon at xymon.com Subject: Re: [Xymon] Multiple graphs per column

Yeah, that was definitely my error :) Fixed in r7674: https://sourceforge.net/p/xymon/code/7674/

Regards, -jc

On 9/22/2015 4:03 PM, Galen Johnson wrote:

Alrighty...it's "documented" in the xymonserver.cfg file :-). And for the sake of completeness, I only needed to fix that. Adding the multigraphs option didn't help in this case.

thanks

=G=

From: Japheth Cleaver <cleaver at terabithia.org><mailto:cleaver at terabithia.org> Sent: Tuesday, September 22, 2015 6:50 PM To: rectifier at gmail.com<mailto:rectifier at gmail.com>; Galen Johnson Cc: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] Multiple graphs per column

Galen,

Actually, it's a documentation bug :/

The proper flag is "GRAPHS_[xxx]" (to mirror the general 'GRAPHS' variable). That *should* work for you going forward.

Thanks for catching this.

-jc

On 9/22/2015 3:44 PM, Steve B wrote: Did you use multigraphs option in cgioptions.cfg?

ex:

CGI_SVC_OPTS="... --multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"

On Tue, Sep 22, 2015 at 11:45 PM, Galen Johnson <Galen.Johnson at sas.com<mailto:Galen.Johnson at sas.com>> wrote:

GRAPH_cpu="la,vmstat1"

As I understand it, that should give me both graphs when I click on the test. Did I just miss a step (yes, I restarted xymon)?

thanks

=G=

Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon

cleaver＠terabithia.org

7 p.m.

I can confirm this.

Even specifying 'omabasic1::1' as such in the regular 'GRAPHS' variable won't affect the override here in htmllog.c, since we're not isolating that name the way we are on the initial load. This will require a patch to fix, unfortunately.

-jc

On 9/23/2015 7:33 AM, Galen Johnson wrote:

...

Ok...running into a different issue. I'd like to define the GRAPHS for my test to do a single graph per entry...

As I understand it, it should follow this format

GRAPHS_omabasic="omabasic,omabasic1::1"

yet, when I go to the page, it tries to call the "omabasic1::1" graph instead of breaking it out to a single graph per line. Note, it shouldn't matter but these are NCVs.

=G=

*From:* Japheth Cleaver <cleaver at terabithia.org> *Sent:* Tuesday, September 22, 2015 7:21 PM *To:* Galen Johnson; rectifier at gmail.com *Cc:* xymon at xymon.com *Subject:* Re: [Xymon] Multiple graphs per column Yeah, that was definitely my error :) Fixed in r7674: https://sourceforge.net/p/xymon/code/7674/

Regards, -jc

On 9/22/2015 4:03 PM, Galen Johnson wrote:

...
Alrighty...it's "documented" in the xymonserver.cfg file :-). And for the sake of completeness, I only needed to fix that. Adding the multigraphs option didn't help in this case.

thanks

=G=

*From:* Japheth Cleaver <cleaver at terabithia.org> *Sent:* Tuesday, September 22, 2015 6:50 PM *To:* rectifier at gmail.com; Galen Johnson *Cc:* xymon at xymon.com *Subject:* Re: [Xymon] Multiple graphs per column Galen,

Actually, it's a documentation bug :/

The proper flag is "GRAPHS_[xxx]" (to mirror the general 'GRAPHS' variable). That *should* work for you going forward.

Thanks for catching this.

-jc

On 9/22/2015 3:44 PM, Steve B wrote:

...
Did you use multigraphs option in cgioptions.cfg?

ex: /CGI_SVC_OPTS=”… //--multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"/

On Tue, Sep 22, 2015 at 11:45 PM, Galen Johnson <Galen.Johnson at sas.com <mailto:Galen.Johnson at sas.com>> wrote:
Has anyone gotten the multiple graphs per column to work?  I
tried using the example in the xymonserver.cfg file but it still
only shows a single graph...for example, if I want the la graph
and vmstat1 I should be able to add the line:


GRAPH_cpu="la,vmstat1"


As I understand it, that should give me both graphs when I click
on the test.  Did I just miss a step (yes, I restarted xymon)?


thanks


=G=



_______________________________________________
Xymon mailing list
Xymon at xymon.com &lt;mailto:Xymon at xymon.com>
http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

Galen.Johnson＠sas.com

7:01 p.m.

?Thanks...I can brute force it for now.

=G=

From: Japheth Cleaver <cleaver at terabithia.org> Sent: Wednesday, September 23, 2015 3:00 PM To: Galen Johnson; rectifier at gmail.com Cc: xymon at xymon.com Subject: Re: [Xymon] Multiple graphs per column

I can confirm this.

-jc

On 9/23/2015 7:33 AM, Galen Johnson wrote:

Ok...running into a different issue. I'd like to define the GRAPHS for my test to do a single graph per entry...

As I understand it, it should follow this format

GRAPHS_omabasic="omabasic,omabasic1::1"

yet, when I go to the page, it tries to call the "omabasic1::1" graph instead of breaking it out to a single graph per line. Note, it shouldn't matter but these are NCVs.

=G=

From: Japheth Cleaver <cleaver at terabithia.org><mailto:cleaver at terabithia.org> Sent: Tuesday, September 22, 2015 7:21 PM To: Galen Johnson; rectifier at gmail.com<mailto:rectifier at gmail.com> Cc: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] Multiple graphs per column

Yeah, that was definitely my error :) Fixed in r7674: https://sourceforge.net/p/xymon/code/7674/

Regards, -jc

On 9/22/2015 4:03 PM, Galen Johnson wrote:

Alrighty...it's "documented" in the xymonserver.cfg file :-). And for the sake of completeness, I only needed to fix that. Adding the multigraphs option didn't help in this case.

thanks

=G=

Galen,

Actually, it's a documentation bug :/

The proper flag is "GRAPHS_[xxx]" (to mirror the general 'GRAPHS' variable). That *should* work for you going forward.

Thanks for catching this.

-jc

On 9/22/2015 3:44 PM, Steve B wrote: Did you use multigraphs option in cgioptions.cfg?

ex:

CGI_SVC_OPTS="... --multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"

On Tue, Sep 22, 2015 at 11:45 PM, Galen Johnson <Galen.Johnson at sas.com<mailto:Galen.Johnson at sas.com>> wrote:

GRAPH_cpu="la,vmstat1"

As I understand it, that should give me both graphs when I click on the test. Did I just miss a step (yes, I restarted xymon)?

thanks

=G=

Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon

everett.vernon＠gmail.com

24 Sep 24 Sep

4:14 a.m.

Hi Galen

I always put the definition in the GRAPHS= variable. graphname::X Where X is the number of data sets per graph.

I do recall a minor annoyance of a bug, where the number of data sets was different to that specified. Can't recall if it was one more or less, but I recall a difference.

Try setting X to 2

Regards Vernon

On 24 September 2015 at 00:33, Galen Johnson <Galen.Johnson at sas.com> wrote:

...

Ok...running into a different issue. I'd like to define the GRAPHS for my test to do a single graph per entry...

As I understand it, it should follow this format

GRAPHS_omabasic="omabasic,omabasic1::1"

yet, when I go to the page, it tries to call the "omabasic1::1" graph instead of breaking it out to a single graph per line. Note, it shouldn't matter but these are NCVs.

=G=

*From:* Japheth Cleaver <cleaver at terabithia.org> *Sent:* Tuesday, September 22, 2015 7:21 PM *To:* Galen Johnson; rectifier at gmail.com

*Cc:* xymon at xymon.com *Subject:* Re: [Xymon] Multiple graphs per column

Yeah, that was definitely my error :) Fixed in r7674: https://sourceforge.net/p/xymon/code/7674/

Regards, -jc

On 9/22/2015 4:03 PM, Galen Johnson wrote:

Alrighty...it's "documented" in the xymonserver.cfg file :-). And for the sake of completeness, I only needed to fix that. Adding the multigraphs option didn't help in this case.

thanks

=G=

*From:* Japheth Cleaver <cleaver at terabithia.org> <cleaver at terabithia.org> *Sent:* Tuesday, September 22, 2015 6:50 PM *To:* rectifier at gmail.com; Galen Johnson *Cc:* xymon at xymon.com *Subject:* Re: [Xymon] Multiple graphs per column

Galen,

Actually, it's a documentation bug :/

The proper flag is "GRAPHS_[xxx]" (to mirror the general 'GRAPHS' variable). That *should* work for you going forward.

Thanks for catching this.

-jc

On 9/22/2015 3:44 PM, Steve B wrote:

Did you use multigraphs option in cgioptions.cfg?

ex:

*CGI_SVC_OPTS=”… **--multigraphs=,disk,inode,qtree,quotas,snapshot,TblSpace,if_load,DBAreas"*

On Tue, Sep 22, 2015 at 11:45 PM, Galen Johnson <Galen.Johnson at sas.com> wrote:

...
Has anyone gotten the multiple graphs per column to work? I tried using the example in the xymonserver.cfg file but it still only shows a single graph...for example, if I want the la graph and vmstat1 I should be able to add the line:

GRAPH_cpu="la,vmstat1"

As I understand it, that should give me both graphs when I click on the test. Did I just miss a step (yes, I restarted xymon)?

thanks

=G=

Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

Xymon mailing listXymon at xymon.comhttp://lists.xymon.com/mailman/listinfo/xymon

Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

-- "Accept the challenges so that you can feel the exhilaration of victory"

General George Patton

3926

Age (days ago)

3928

Last active (days ago)

List overview

Download

8 comments

4 participants

participants (4)

cleaver＠terabithia.org
everett.vernon＠gmail.com
Galen.Johnson＠sas.com
rectifier＠gmail.com