conn/ping latency warning
How do I enable warnings/alerts based on the conn/ping "latency" for a device? I know it will allow you to set warnings based on the amount of fails but not the latency itself - do I need a custom script/command for this? EG. Go yellow on 500ms+ ping red on 1000ms+ ping?
Thanks,
Marc
Please consider the environment before printing this email
This message, together with any attachment, is intended only for the use of the individual or entity to which it is addressed, and may contain information that is legally privileged and confidential. If you are not the intended recipient, please be informed that any dissemination, distribution or copying of this message, or any attachment is strictly prohibited. Kindly note that Internet communications are not secured and therefore are susceptible to alteration. RFBI will not accept legal responsibility for the contents of this message. If you have received this message in error, please advise the sender by reply e-mail, and delete the message. Thank you for your co-operation.
Great question, I'm interested in the results Marc, plz send/post summary/solution.
Thanks -Steve
On 8/12/2010 7:33 PM, Marc Fricke wrote:
How do I enable warnings/alerts based on the conn/ping "latency" for a device? I know it will allow you to set warnings based on the amount of fails but not the latency itself -- do I need a custom script/command for this? EG. Go yellow on 500ms+ ping red on 1000ms+ ping?
Thanks,
Marc
Please consider the environment before printing this email
This message, together with any attachment, is intended only for the use of the individual or entity to which it is addressed, and may contain information that is legally privileged and confidential. If you are not the intended recipient, please be informed that any dissemination, distribution or copying of this message, or any attachment is strictly prohibited. Kindly note that Internet communications are not secured and therefore are susceptible to alteration. RFBI will not accept legal responsibility for the contents of this message. If you have received this message in error, please advise the sender by reply e-mail, and delete the message. Thank you for your co-operation.
Unfortunately I'm not sure how to do this, anyone know?
On 15/08/2010, at 2:05 AM, "Stephen" <Stephen.Mullin at usa.net<mailto:Stephen.Mullin at usa.net>> wrote:
Great question, I'm interested in the results Marc, plz send/post summary/solution.
Thanks -Steve
On 8/12/2010 7:33 PM, Marc Fricke wrote: How do I enable warnings/alerts based on the conn/ping “latency” for a device? I know it will allow you to set warnings based on the amount of fails but not the latency itself – do I need a custom script/command for this? EG. Go yellow on 500ms+ ping red on 1000ms+ ping?
Thanks,
Marc
Please consider the environment before printing this email
This message, together with any attachment, is intended only for the use of the individual or entity to which it is addressed, and may contain information that is legally privileged and confidential. If you are not the intended recipient, please be informed that any dissemination, distribution or copying of this message, or any attachment is strictly prohibited. Kindly note that Internet communications are not secured and therefore are susceptible to alteration. RFBI will not accept legal responsibility for the contents of this message. If you have received this message in error, please advise the sender by reply e-mail, and delete the message. Thank you for your co-operation.
Please consider the environment before printing this email
This message, together with any attachment, is intended only for the use of the individual or entity to which it is addressed, and may contain information that is legally privileged and confidential. If you are not the intended recipient, please be informed that any dissemination, distribution or copying of this message, or any attachment is strictly prohibited. Kindly note that Internet communications are not secured and therefore are susceptible to alteration. RFBI will not accept legal responsibility for the contents of this message. If you have received this message in error, please advise the sender by reply e-mail, and delete the message. Thank you for your co-operation.
On Aug 14, 2010, at 8:34 PM, Marc Fricke <mfricke at royfree.org.au> wrote:
Unfortunately I'm not sure how to do this, anyone know?
On 15/08/2010, at 2:05 AM, "Stephen" <Stephen.Mullin at usa.net> wrote:
Great question, I'm interested in the results Marc, plz send/post summary/solution.
Thanks -Steve
On 8/12/2010 7:33 PM, Marc Fricke wrote:
How do I enable warnings/alerts based on the conn/ping “latency” for a device? I know it will allow you to set warnings based on the amount of fails but not the latency itself – do I need a custom script/command for this? EG. Go yellow on 500ms+ ping red on 1000ms+ ping?
Thanks,
Marc
Please consider the environment before printing this email
I have never seen any indication that this can be done out of the box. Steve
Hi Marc,
to my knowledge this cannot be done with (vanilla) xymon but a tool designed exactly for this is smokeping http://oss.oetiker.ch/smokeping/ smokeping collects latency-data (for ping and many other protocols) in RRD graphs an can send warning e-mails on certain criteria.
I seem to remember an extension on deadcat that allows the integration on smokeping (in big-brother and probably hobbit/xymon as well) but never tested it myself. The upcomping feature of xymon to generate status-messages from arbitrary rrd-files may ease the integration.
For generating the smokeping-configuration from a bb-hosts file I have created an quick-and-dirty script I could share.
HTH,
Thomas
On Fri, 13 Aug 2010, Marc Fricke wrote:
How do I enable warnings/alerts based on the conn/ping "latency" for a device? I know it will allow you to set warnings based on the amount of fails but not the latency itself - do I need a custom script/command for this? EG. Go yellow on 500ms+ ping red on 1000ms+ ping?
Thanks,
Marc
| IT-Beratung Eckert | Hartkirchweg 54 | fon: +49 (0)761/ 594 9898 | Thomas Eckert | 79111 Freiburg i.Br. | fax: +49 (0)761/ 594 9899 | | Germany | http://www.it-eckert.de/
Or you could try rolling your own. Use this as the basis. ping -c 10 $IP | grep ttl | sed "s/=/ /g" | awk '{ sum+=$10 } END { print "Average = ",sum/NR }' Flavour to taste.
Regards Vernon
On Sun, Aug 15, 2010 at 3:40 PM, Thomas Eckert <thomas.eckert at it-eckert.de>wrote:
Hi Marc,
to my knowledge this cannot be done with (vanilla) xymon but a tool designed exactly for this is smokeping http://oss.oetiker.ch/smokeping/ smokeping collects latency-data (for ping and many other protocols) in RRD graphs an can send warning e-mails on certain criteria.
I seem to remember an extension on deadcat that allows the integration on smokeping (in big-brother and probably hobbit/xymon as well) but never tested it myself. The upcomping feature of xymon to generate status-messages from arbitrary rrd-files may ease the integration.
For generating the smokeping-configuration from a bb-hosts file I have created an quick-and-dirty script I could share.
HTH,
ThomasOn Fri, 13 Aug 2010, Marc Fricke wrote:
How do I enable warnings/alerts based on the conn/ping "latency" for a
device? I know it will allow you to set warnings based on the amount of fails but not the latency itself - do I need a custom script/command for this? EG. Go yellow on 500ms+ ping red on 1000ms+ ping?
Thanks,
Marc
--
| IT-Beratung Eckert | Hartkirchweg 54 | fon: +49 (0)761/ 594 9898 | Thomas Eckert | 79111 Freiburg i.Br. | fax: +49 (0)761/ 594 9899 | | Germany | http://www.it-eckert.de/
To unsubscribe from the xymon list, send an e-mail to xymon-unsubscribe at xymon.com
participants (5)
-
everett.vernon@gmail.com
-
mfricke@royfree.org.au
-
sholmes42@gmail.com
-
Stephen.Mullin@usa.net
-
thomas.eckert@IT-Eckert.de