[hobbit] External Script installation
Sometimes you get that message when the perl script can't find perl. Maybe you should check the first line of the script?
Another reason (just guessing) is that the Hobbit user cannot read the script...
GLH
-----Original Message----- From: robert.s.bethke at wmich.edu [mailto:robert.s.bethke at wmich.edu] On Behalf Of Robert Bethke Sent: Wednesday, March 29, 2006 11:31 AM To: hobbit at hswn.dk Subject: [hobbit] External Script installation
I am trying to setup bb-imap.pl from http://www.deadcat.net/viewfile.php?fileid=513. So far I've installed each of the required perl modules and placed the BigBrother.pm (Already adjusted bb-imap.pl to point to it) and bb-imap.pl files within the EXT folder. I also added the following to hobbitlaunch.cfg:
[bbimap] ENVFILE /home/hobbit/server/etc/bb-imaptab NEEDS hobbitd CMD $BBHOME/ext/bb-imap.pl LOGFILE $BBSERVERLOGS/bb-imap.log INTERVAL 5m
When I try to run this test nothing happens within hobbit. If I check the bb-imap.log the only statement it contains is:
2006-03-29 11:33:21 Could not start task bbimap using command '/home/hobbit/server/ext/bb-imap.pl': No such file or directory
I'm confused about this because the file does exist at that location. I also changed $test to bbimap from imap2. I'm going to guess I'm missing some installation step on this thing. If someone could point out what I'm not doing right and give me a the correct steps to get this working it would be greatly appreciated.
Thanks Again, Robert Bethke
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Whoops, I corrected that to point to perl properly though now I recieve a new message in the log:
Can't locate Date/Manip.pm in @INC (@INC contains: /home/hobbit/server/ext /usr/lib/perl5/5.8.7/i586-linux-thread-multi /usr/lib/perl5/5.8.7 /usr/lib/perl5/site_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl .) at /home/hobbit/server/ext/BigBrother.pm line 130. BEGIN failed--compilation aborted at /home/hobbit/server/ext/BigBrother.pm line 130. Compilation failed in require at /home/hobbit/server/ext/bb-imap.pl line 46. BEGIN failed--compilation aborted at /home/hobbit/server/ext/bb-imap.pl line 46.
Any suggestions on how to correct this?
Robert
On Wednesday 29 March 2006 12:39 pm, Hubbard, Greg L wrote:
Sometimes you get that message when the perl script can't find perl. Maybe you should check the first line of the script?
Another reason (just guessing) is that the Hobbit user cannot read the script...
GLH
-----Original Message----- From: robert.s.bethke at wmich.edu [mailto:robert.s.bethke at wmich.edu] On Behalf Of Robert Bethke Sent: Wednesday, March 29, 2006 11:31 AM To: hobbit at hswn.dk Subject: [hobbit] External Script installation
I am trying to setup bb-imap.pl from http://www.deadcat.net/viewfile.php?fileid=513. So far I've installed each of the required perl modules and placed the BigBrother.pm (Already adjusted bb-imap.pl to point to it) and bb-imap.pl files within the EXT folder. I also added the following to hobbitlaunch.cfg:
[bbimap] ENVFILE /home/hobbit/server/etc/bb-imaptab NEEDS hobbitd CMD $BBHOME/ext/bb-imap.pl LOGFILE $BBSERVERLOGS/bb-imap.log INTERVAL 5m
When I try to run this test nothing happens within hobbit. If I check the bb-imap.log the only statement it contains is:
2006-03-29 11:33:21 Could not start task bbimap using command '/home/hobbit/server/ext/bb-imap.pl': No such file or directory
I'm confused about this because the file does exist at that location. I also changed $test to bbimap from imap2. I'm going to guess I'm missing some installation step on this thing. If someone could point out what I'm not doing right and give me a the correct steps to get this working it would be greatly appreciated.
Thanks Again, Robert Bethke
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Check that you have the Date::Manip perl module installed. This message indicated that perl can't find it in the paths shown. (@INC). If the module is installed correctly, then the command:
perldoc Date::Manip
will return its manual page.
Regards Geoff
On Wed, 2006-03-29 at 13:22 -0500, Robert Bethke wrote:
Whoops, I corrected that to point to perl properly though now I recieve a new message in the log:
Can't locate Date/Manip.pm in @INC (@INC contains: /home/hobbit/server/ext /usr/lib/perl5/5.8.7/i586-linux-thread-multi /usr/lib/perl5/5.8.7 /usr/lib/perl5/site_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl .) at /home/hobbit/server/ext/BigBrother.pm line 130. BEGIN failed--compilation aborted at /home/hobbit/server/ext/BigBrother.pm line 130. Compilation failed in require at /home/hobbit/server/ext/bb-imap.pl line 46. BEGIN failed--compilation aborted at /home/hobbit/server/ext/bb-imap.pl line 46.
Any suggestions on how to correct this?
Robert
On Wednesday 29 March 2006 12:39 pm, Hubbard, Greg L wrote:
Sometimes you get that message when the perl script can't find perl. Maybe you should check the first line of the script?
Another reason (just guessing) is that the Hobbit user cannot read the script...
GLH
-----Original Message----- From: robert.s.bethke at wmich.edu [mailto:robert.s.bethke at wmich.edu] On Behalf Of Robert Bethke Sent: Wednesday, March 29, 2006 11:31 AM To: hobbit at hswn.dk Subject: [hobbit] External Script installation
I am trying to setup bb-imap.pl from http://www.deadcat.net/viewfile.php?fileid=513. So far I've installed each of the required perl modules and placed the BigBrother.pm (Already adjusted bb-imap.pl to point to it) and bb-imap.pl files within the EXT folder. I also added the following to hobbitlaunch.cfg:
[bbimap] ENVFILE /home/hobbit/server/etc/bb-imaptab NEEDS hobbitd CMD $BBHOME/ext/bb-imap.pl LOGFILE $BBSERVERLOGS/bb-imap.log INTERVAL 5m
When I try to run this test nothing happens within hobbit. If I check the bb-imap.log the only statement it contains is:
2006-03-29 11:33:21 Could not start task bbimap using command '/home/hobbit/server/ext/bb-imap.pl': No such file or directory
I'm confused about this because the file does exist at that location. I also changed $test to bbimap from imap2. I'm going to guess I'm missing some installation step on this thing. If someone could point out what I'm not doing right and give me a the correct steps to get this working it would be greatly appreciated.
Thanks Again, Robert Bethke
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-------------------------------Safe Stamp----------------------------------- Your Anti-virus Service scanned this email. It is safe from known viruses. For more information regarding this service, please contact your service provider.
-------------------------------Safe Stamp----------------------------------- The sender's Anti-virus Service scanned this email. It is safe from known viruses.
The odd thing is that I do get a proper return for Date::Manip. It would seem this script doesn't see it for some reason, though I believe it's in the default location. All the other required modules are also installed and the imaptab file is formatted properly. Anyway let me know if you need any further information.
Thanks, Robert Bethke
On Wednesday 29 March 2006 8:33 pm, Geoff Steer wrote:
Check that you have the Date::Manip perl module installed. This message indicated that perl can't find it in the paths shown. (@INC). If the module is installed correctly, then the command:
perldoc Date::Manip
will return its manual page.
Regards Geoff
On Wed, 2006-03-29 at 13:22 -0500, Robert Bethke wrote:
Whoops, I corrected that to point to perl properly though now I recieve a new message in the log:
Can't locate Date/Manip.pm in @INC (@INC contains: /home/hobbit/server/ext /usr/lib/perl5/5.8.7/i586-linux-thread-multi /usr/lib/perl5/5.8.7 /usr/lib/perl5/site_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl .) at /home/hobbit/server/ext/BigBrother.pm line 130. BEGIN failed--compilation aborted at /home/hobbit/server/ext/BigBrother.pm line 130. Compilation failed in require at /home/hobbit/server/ext/bb-imap.pl line 46. BEGIN failed--compilation aborted at /home/hobbit/server/ext/bb-imap.pl line 46.
Any suggestions on how to correct this?
Robert
On Wednesday 29 March 2006 12:39 pm, Hubbard, Greg L wrote:
Sometimes you get that message when the perl script can't find perl. Maybe you should check the first line of the script?
Another reason (just guessing) is that the Hobbit user cannot read the script...
GLH
-----Original Message----- From: robert.s.bethke at wmich.edu [mailto:robert.s.bethke at wmich.edu] On Behalf Of Robert Bethke Sent: Wednesday, March 29, 2006 11:31 AM To: hobbit at hswn.dk Subject: [hobbit] External Script installation
I am trying to setup bb-imap.pl from http://www.deadcat.net/viewfile.php?fileid=513. So far I've installed each of the required perl modules and placed the BigBrother.pm (Already adjusted bb-imap.pl to point to it) and bb-imap.pl files within the EXT folder. I also added the following to hobbitlaunch.cfg:
[bbimap] ENVFILE /home/hobbit/server/etc/bb-imaptab NEEDS hobbitd CMD $BBHOME/ext/bb-imap.pl LOGFILE $BBSERVERLOGS/bb-imap.log INTERVAL 5m
When I try to run this test nothing happens within hobbit. If I check the bb-imap.log the only statement it contains is:
2006-03-29 11:33:21 Could not start task bbimap using command '/home/hobbit/server/ext/bb-imap.pl': No such file or directory
I'm confused about this because the file does exist at that location. I also changed $test to bbimap from imap2. I'm going to guess I'm missing some installation step on this thing. If someone could point out what I'm not doing right and give me a the correct steps to get this working it would be greatly appreciated.
Thanks Again, Robert Bethke
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-------------------------------Safe Stamp----------------------------------- Your Anti-virus Service scanned this email. It is safe from known viruses. For more information regarding this service, please contact your service provider.
-------------------------------Safe Stamp----------------------------------- The sender's Anti-virus Service scanned this email. It is safe from known viruses.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Ok, I got it working after I moved the Date folder into the 5.8.7 folder. Anyone have any ideas on how to get this working with an SSL encrypted connection?
Robert
On Thursday 30 March 2006 10:13 am, Robert Bethke wrote:
The odd thing is that I do get a proper return for Date::Manip. It would seem this script doesn't see it for some reason, though I believe it's in the default location. All the other required modules are also installed and the imaptab file is formatted properly. Anyway let me know if you need any further information.
Thanks, Robert Bethke
On Wednesday 29 March 2006 8:33 pm, Geoff Steer wrote:
Check that you have the Date::Manip perl module installed. This message indicated that perl can't find it in the paths shown. (@INC). If the module is installed correctly, then the command:
perldoc Date::Manip
will return its manual page.
Regards Geoff
On Wed, 2006-03-29 at 13:22 -0500, Robert Bethke wrote:
Whoops, I corrected that to point to perl properly though now I recieve a new message in the log:
Can't locate Date/Manip.pm in @INC (@INC contains: /home/hobbit/server/ext /usr/lib/perl5/5.8.7/i586-linux-thread-multi /usr/lib/perl5/5.8.7 /usr/lib/perl5/site_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl .) at /home/hobbit/server/ext/BigBrother.pm line 130. BEGIN failed--compilation aborted at /home/hobbit/server/ext/BigBrother.pm line 130. Compilation failed in require at /home/hobbit/server/ext/bb-imap.pl line 46. BEGIN failed--compilation aborted at /home/hobbit/server/ext/bb-imap.pl line 46.
Any suggestions on how to correct this?
Robert
On Wednesday 29 March 2006 12:39 pm, Hubbard, Greg L wrote:
Sometimes you get that message when the perl script can't find perl. Maybe you should check the first line of the script?
Another reason (just guessing) is that the Hobbit user cannot read the script...
GLH
-----Original Message----- From: robert.s.bethke at wmich.edu [mailto:robert.s.bethke at wmich.edu] On Behalf Of Robert Bethke Sent: Wednesday, March 29, 2006 11:31 AM To: hobbit at hswn.dk Subject: [hobbit] External Script installation
I am trying to setup bb-imap.pl from http://www.deadcat.net/viewfile.php?fileid=513. So far I've installed each of the required perl modules and placed the BigBrother.pm (Already adjusted bb-imap.pl to point to it) and bb-imap.pl files within the EXT folder. I also added the following to hobbitlaunch.cfg:
[bbimap] ENVFILE /home/hobbit/server/etc/bb-imaptab NEEDS hobbitd CMD $BBHOME/ext/bb-imap.pl LOGFILE $BBSERVERLOGS/bb-imap.log INTERVAL 5m
When I try to run this test nothing happens within hobbit. If I check the bb-imap.log the only statement it contains is:
2006-03-29 11:33:21 Could not start task bbimap using command '/home/hobbit/server/ext/bb-imap.pl': No such file or directory
I'm confused about this because the file does exist at that location. I also changed $test to bbimap from imap2. I'm going to guess I'm missing some installation step on this thing. If someone could point out what I'm not doing right and give me a the correct steps to get this working it would be greatly appreciated.
Thanks Again, Robert Bethke
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-------------------------------Safe Stamp----------------------------------- Your Anti-virus Service scanned this email. It is safe from known viruses. For more information regarding this service, please contact your service provider.
-------------------------------Safe Stamp----------------------------------- The sender's Anti-virus Service scanned this email. It is safe from known viruses.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Try searching for the module and confirming that the @INC path does include that directory.
cd /usr/lib find perl* -name "*Manip*" -print
On my systems (Linux, Centos 4.2), it's under /usr/lib/perl5/vendor_perl.
Regards Geoff
On Thu, 2006-03-30 at 10:13 -0500, Robert Bethke wrote:
The odd thing is that I do get a proper return for Date::Manip. It would seem this script doesn't see it for some reason, though I believe it's in the default location. All the other required modules are also installed and the imaptab file is formatted properly. Anyway let me know if you need any further information.
Thanks, Robert Bethke
On Wednesday 29 March 2006 8:33 pm, Geoff Steer wrote:
Check that you have the Date::Manip perl module installed. This message indicated that perl can't find it in the paths shown. (@INC). If the module is installed correctly, then the command:
perldoc Date::Manip
will return its manual page.
Regards Geoff
On Wed, 2006-03-29 at 13:22 -0500, Robert Bethke wrote:
Whoops, I corrected that to point to perl properly though now I recieve a new message in the log:
Can't locate Date/Manip.pm in @INC (@INC contains: /home/hobbit/server/ext /usr/lib/perl5/5.8.7/i586-linux-thread-multi /usr/lib/perl5/5.8.7 /usr/lib/perl5/site_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl .) at /home/hobbit/server/ext/BigBrother.pm line 130. BEGIN failed--compilation aborted at /home/hobbit/server/ext/BigBrother.pm line 130. Compilation failed in require at /home/hobbit/server/ext/bb-imap.pl line 46. BEGIN failed--compilation aborted at /home/hobbit/server/ext/bb-imap.pl line 46.
Any suggestions on how to correct this?
Robert
On Wednesday 29 March 2006 12:39 pm, Hubbard, Greg L wrote:
Sometimes you get that message when the perl script can't find perl. Maybe you should check the first line of the script?
Another reason (just guessing) is that the Hobbit user cannot read the script...
GLH
-----Original Message----- From: robert.s.bethke at wmich.edu [mailto:robert.s.bethke at wmich.edu] On Behalf Of Robert Bethke Sent: Wednesday, March 29, 2006 11:31 AM To: hobbit at hswn.dk Subject: [hobbit] External Script installation
I am trying to setup bb-imap.pl from http://www.deadcat.net/viewfile.php?fileid=513. So far I've installed each of the required perl modules and placed the BigBrother.pm (Already adjusted bb-imap.pl to point to it) and bb-imap.pl files within the EXT folder. I also added the following to hobbitlaunch.cfg:
[bbimap] ENVFILE /home/hobbit/server/etc/bb-imaptab NEEDS hobbitd CMD $BBHOME/ext/bb-imap.pl LOGFILE $BBSERVERLOGS/bb-imap.log INTERVAL 5m
When I try to run this test nothing happens within hobbit. If I check the bb-imap.log the only statement it contains is:
2006-03-29 11:33:21 Could not start task bbimap using command '/home/hobbit/server/ext/bb-imap.pl': No such file or directory
I'm confused about this because the file does exist at that location. I also changed $test to bbimap from imap2. I'm going to guess I'm missing some installation step on this thing. If someone could point out what I'm not doing right and give me a the correct steps to get this working it would be greatly appreciated.
Thanks Again, Robert Bethke
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-------------------------------Safe Stamp----------------------------------- Your Anti-virus Service scanned this email. It is safe from known viruses. For more information regarding this service, please contact your service provider.
-------------------------------Safe Stamp----------------------------------- The sender's Anti-virus Service scanned this email. It is safe from known viruses.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-------------------------------Safe Stamp----------------------------------- Your Anti-virus Service scanned this email. It is safe from known viruses. For more information regarding this service, please contact your service provider.
-------------------------------Safe Stamp----------------------------------- The sender's Anti-virus Service scanned this email. It is safe from known viruses.
Robert Bethke, the error message means you have to install the Perl Module Date/Manip.pm , and you can download it from cpan, below is the download link: http://mirrors.dayouit.com/CPAN/authors/id/S/SB/SBECK/DateManip-5.44.tar.gz you can install the module in such steps: tar xvfz DateManip-5.44.tar.gz cd DateManip-5.44 perl Makefile.PL make Then use root to execute the command "make insatll" in the DateManip-5.44 dir by the way , the bb-imap.pl External Script needs install perl module Mail::IMAPClient install perl module Time::HiRes install perl module BigBrother (from www.deadcat.net) you can download from below links: http://mirrors.dayouit.com/CPAN/authors/id/J/JH/JHI/Time-HiRes-1.87.tar.gz http://cpan.linuxforum.net/authors/id/D/DJ/DJKERNEN/Mail-IMAPClient-2.2.9.ta... http://www.deadcat.net/viewfile.php?fileid=310
and another thing to notice ,you should use white space instead of Tab in the bb-imaptab file for example , mail.domain.com 143 mailuser password please don't use Tab to seprate them.
On Wed, 29 Mar 2006 13:22:23 -0500 Robert Bethke <r4bethke+HobbitMail at wmich.edu> Wrote:
Whoops, I corrected that to point to perl properly though now I recieve a new message in the log:
Can't locate Date/Manip.pm in @INC (@INC contains: /home/hobbit/server/ext /usr/lib/perl5/5.8.7/i586-linux-thread-multi /usr/lib/perl5/5.8.7 /usr/lib/perl5/site_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/site_perl/5.8.7 /usr/lib/perl5/site_perl /usr/lib/perl5/vendor_perl/5.8.7/i586-linux-thread-multi /usr/lib/perl5/vendor_perl/5.8.7 /usr/lib/perl5/vendor_perl .) at /home/hobbit/server/ext/BigBrother.pm line 130. BEGIN failed--compilation aborted at /home/hobbit/server/ext/BigBrother.pm line 130. Compilation failed in require at /home/hobbit/server/ext/bb-imap.pl line 46. BEGIN failed--compilation aborted at /home/hobbit/server/ext/bb-imap.pl line 46.
Confidentiality Notice: The information contained in this e-mail and any accompanying attachment(s) is intended only for the use of the intended recipient and may be confidential and/or privileged of Neusoft Group Ltd., its subsidiaries and/or its affiliates. If any reader of this communication is not the intended recipient, unauthorized use, forwarding, printing, storing, disclosure or copying is strictly prohibited, and may be unlawful. If you have received this communication in error, please immediately notify the sender by return e-mail, and delete the original message and all copies from your system. Thank you.
participants (4)
-
greg.hubbard@eds.com
-
gsteer@firstwave.com.au
-
r4bethke+HobbitMail@wmich.edu
-
xiao.xj@neusoft.com