[hobbit] DISK test: only monitor specific filesystems
I am trying to do this same thing, but nothing I put in hobbit-clients.cfg on the server seems to take any effect. Is there something I have to do to get hobbit to re-read this file?
-----Original Message----- From: Henrik Stoerner [mailto:henrik at hswn.dk] Sent: Wednesday, June 06, 2007 10:37 AM To: hobbit at hswn.dk Subject: Re: [hobbit] DISK test: only monitor specific filesystems
On Wed, Jun 06, 2007 at 09:17:24AM -0600, Haertig, David F (Dave) wrote:
I want to only monitor three specific filesystem on a host, and ignore
the rest. I tried this in hobbit-clients.cfg:
HOST=wcscbe5 DISK * IGNORE DISK /expsys 90 95 DISK /expert 90 95 DISK /inadsb 90 95
Almost right, put the "DISK * IGNORE" line last instead of first. First match wins in Hobbit, so you should have the most specific entries first, and the more generic (default) ones last.
Regards, Henrik
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
CONFIDENTIALITY NOTICE: This message is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by email reply.
hobbitd_client should reload this file every 10 minutes, if there are any changes to it. You can also do a "kill -HUP PID" with the process-ID of the hobbitd_client process to force a reload.
But try the "--test" mode first. Like this:
$ bbcmd hobbitd_client --test Hostname (.=end, ?=dump, !=reload) []: myhost Hosttype []: Test (cpu, mem, disk, proc, log, port): disk Filesystem: / Yellow at 85%, red at 90% Hostname (.=end, ?=dump, !=reload) [myhost]: Test (cpu, mem, disk, proc, log, port): disk Filesystem: /backup Ignored
This is with the following config:
DISK / 85 90
DISK * IGNORERegards, Henrik
On Thu, Jul 12, 2007 at 10:05:09AM -0500, Matlock, Chris wrote:
I am trying to do this same thing, but nothing I put in hobbit-clients.cfg on the server seems to take any effect. Is there something I have to do to get hobbit to re-read this file?
-----Original Message----- From: Henrik Stoerner [mailto:henrik at hswn.dk] Sent: Wednesday, June 06, 2007 10:37 AM To: hobbit at hswn.dk Subject: Re: [hobbit] DISK test: only monitor specific filesystems
On Wed, Jun 06, 2007 at 09:17:24AM -0600, Haertig, David F (Dave) wrote:
I want to only monitor three specific filesystem on a host, and ignore
the rest. I tried this in hobbit-clients.cfg:
HOST=wcscbe5 DISK * IGNORE DISK /expsys 90 95 DISK /expert 90 95 DISK /inadsb 90 95
Almost right, put the "DISK * IGNORE" line last instead of first. First match wins in Hobbit, so you should have the most specific entries first, and the more generic (default) ones last.
Regards, Henrik
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
CONFIDENTIALITY NOTICE: This message is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by email reply.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Henrik Storner
Thanks for the test command. That does help. I do see some changes taking effect, but I am still not getting what I wanted though. I put the following lines in my hobbit-clients.cfg file.
HOST=www-test2 DISK /boot 85 90 DISK * IGNORE
When I ran bbcmd hobbitd_client --test I got the following output.
[root at 050halpnode2 bin]# ./bbcmd hobbitd_client --test 2007-07-12 10:36:43 Using default environment file /mnt/hobbit/server/etc/hobbitserver.cfg Hostname (.=end, ?=dump, !=reload) []: www-test2 Test (cpu, mem, disk, proc): disk Filesystem: / Yellow at 0K, red at 95% Hostname (.=end, ?=dump, !=reload) [www-test2]: Test (cpu, mem, disk, proc): disk Filesystem: /boot Yellow at 92%, red at 97% Hostname (.=end, ?=dump, !=reload) [www-test2]:
Shouldn't it say / is ignored instead of Yellow at OK, red 95%? I guess I should also state that I am running hobbit 4.2-alfa-20060423. I am seeing this behavior because I'm running an alfa ver and need to upgrade?
Thanks for any help or advice you can provide.
-----Original Message----- From: Henrik Stoerner [mailto:henrik at hswn.dk] Sent: Thursday, July 12, 2007 10:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] DISK test: only monitor specific filesystems
hobbitd_client should reload this file every 10 minutes, if there are any changes to it. You can also do a "kill -HUP PID" with the process-ID of the hobbitd_client process to force a reload.
But try the "--test" mode first. Like this:
$ bbcmd hobbitd_client --test Hostname (.=end, ?=dump, !=reload) []: myhost Hosttype []: Test (cpu, mem, disk, proc, log, port): disk Filesystem: / Yellow at 85%, red at 90% Hostname (.=end, ?=dump, !=reload) [myhost]: Test (cpu, mem, disk, proc, log, port): disk Filesystem: /backup Ignored
This is with the following config:
DISK / 85 90
DISK * IGNORERegards, Henrik
On Thu, Jul 12, 2007 at 10:05:09AM -0500, Matlock, Chris wrote:
I am trying to do this same thing, but nothing I put in hobbit-clients.cfg on the server seems to take any effect. Is there something I have to do to get hobbit to re-read this file?
-----Original Message----- From: Henrik Stoerner [mailto:henrik at hswn.dk] Sent: Wednesday, June 06, 2007 10:37 AM To: hobbit at hswn.dk Subject: Re: [hobbit] DISK test: only monitor specific filesystems
On Wed, Jun 06, 2007 at 09:17:24AM -0600, Haertig, David F (Dave) wrote:
I want to only monitor three specific filesystem on a host, and ignore
the rest. I tried this in hobbit-clients.cfg:
HOST=wcscbe5 DISK * IGNORE DISK /expsys 90 95 DISK /expert 90 95 DISK /inadsb 90 95
Almost right, put the "DISK * IGNORE" line last instead of first. First match wins in Hobbit, so you should have the most specific entries first, and the more generic (default) ones last.
Regards, Henrik
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
CONFIDENTIALITY NOTICE: This message is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by email reply.
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Henrik Storner
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
CONFIDENTIALITY NOTICE: This message is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by email reply.
participants (2)
-
CMatlock＠ADMWorld.com
-
henrik＠hswn.dk