Hi,
I have the same problem here,
My Xymon conf are:
MAXMSG_STATUS="3145728"
MAXMSG_CLIENT="3145728"
MAXMSG_DATA="3145728"
MAXMSG_NOTES="3145728"
MAXLINE="3145728
There is another configuration on server or client side that resolve this problem?
2014-03-13 17:23 GMT-03:00 Mike Burger <mburger at bubbanfriends.org>:
Hello Mike,
Thanks for reply, in your case change valeus solved the problem?
I'll change and test.
2014-03-13 17:00 GMT-03:00 Mike Burger <mburger at bubbanfriends.org>:
Hello,
Thanks for the reply. I checked the folder "tmp" and the msg file. <hostname> Has 72K, and all files from tmp folder add 100K, I believe that this is not the problem.
What parameter that you changed in xymonclient-os.sh? In my case is linux. About MAXDATA parameter, which is the default value? Therefore found no parameter in this xymonserver.cfg
I was running into a situation where my messages, data and/or status was incomplete.
I set the following, to compensate:
MAXLINE="32768" MAXMSG_CLIENT=1536 # clientdata messages (default=512k) MAXMSG_STATUS=1536 # general "status" messages (default=256k) MAXMSG_DATA=1536 # "data" messages, if enabled (default=256k)
I strongly recommend increasing your values as mentioned by Torsten.
Indeed, they did. :-)
-- Mike Burger http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
One possibility - are these settings reflected in the local client config? If you are running in central mode. The central mode settings are in:
$XYMONHOME/tmp/logfetch.hostname.whatever.cfg
I have had local config settings override the central settings with bbwin, don't know if that happens with linux clients.
cheers, Phil
From: Xymon on behalf of Bruno Deschamps Sent: Tuesday, 17 June 2014 5:34 AM To: Mike Burger Cc: xymon at xymon.com Subject: Re: [Xymon] "procs" monitoring
Hi,
I have the same problem here,
My Xymon conf are:
MAXMSG_STATUS="3145728"
MAXMSG_CLIENT="3145728"
MAXMSG_DATA="3145728"
MAXMSG_NOTES="3145728"
MAXLINE="3145728
There is another configuration on server or client side that resolve this problem?
[http://www.redix.com.br/email/2014/assinaturadigital2014_bruno.jpg]
2014-03-13 17:23 GMT-03:00 Mike Burger <mburger at bubbanfriends.org<mailto:mburger at bubbanfriends.org>>:
Hello Mike,
Thanks for reply, in your case change valeus solved the problem?
I'll change and test.
2014-03-13 17:00 GMT-03:00 Mike Burger <mburger at bubbanfriends.org<mailto:mburger at bubbanfriends.org>>:
Hello,
Thanks for the reply. I checked the folder "tmp" and the msg file. <hostname> Has 72K, and all files from tmp folder add 100K, I believe that this is not the problem.
What parameter that you changed in xymonclient-os.sh? In my case is linux. About MAXDATA parameter, which is the default value? Therefore found no parameter in this xymonserver.cfg
I was running into a situation where my messages, data and/or status was incomplete.
I set the following, to compensate:
MAXLINE="32768" MAXMSG_CLIENT=1536 # clientdata messages (default=512k) MAXMSG_STATUS=1536 # general "status" messages (default=256k) MAXMSG_DATA=1536 # "data" messages, if enabled (default=256k)
I strongly recommend increasing your values as mentioned by Torsten.
Indeed, they did. :-)
-- Mike Burger http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
participants (2)
-
bruno@redix.com.br
-
Phil.Crooker@orix.com.au