Issue with xymon-rclient.sh
Hi to the list,
working with xymon since 2008, still using it.
Now I was in the situation to include a LinuxMint machine (with desktop environment), using Jeremy's xymon-rclient.sh 0.6.1 to monitor this thing. After setting up the ssh-based authentication and waiting a couple of minutes, the data of this LinuxMint machine came up and appeared in Xymon.
Other than other machines i'm pulling with xymon-rclient.sh, the CPU state of this machine became red immediately. It seems to me that the Load Average of the LinuxMint machine is interpreted wrong: when looking in Xymon, it tells me a Load Average of 60.00, while looking to the LinuxMint machine, seeing it's Load Average at 0.6.
What could be wrong? The LinuxMint machine is running LinuxMint 22.1 with it's lates updates. These are the locales used by the LinuxMint machine:
LANG=en_US.UTF-8 LANGUAGE=en_US LC_CTYPE="en_US.UTF-8" LC_NUMERIC=de_DE.UTF-8 LC_TIME=de_DE.UTF-8 LC_COLLATE="en_US.UTF-8" LC_MONETARY=de_DE.UTF-8 LC_MESSAGES="en_US.UTF-8" LC_PAPER=de_DE.UTF-8 LC_NAME=de_DE.UTF-8 LC_ADDRESS=de_DE.UTF-8 LC_TELEPHONE=de_DE.UTF-8 LC_MEASUREMENT=de_DE.UTF-8 LC_IDENTIFICATION=de_DE.UTF-8 LC_ALL=
Yes, they are mixed....
We've a few other linux client machines running "non-server-linuxes" (i.e. RaspberryPi running Raspberry PI OS) which are reporting fine using xymon-rclient.sh.
Regards Christian
Christian, Looking at xymon-rclient.sh, it will grab the load average from the "top" command. I assume for your configuration that it is using the xymonclient-linux.sh script to collect the data. If so, it runs "$TOP -b -n 1" and the line near the top that has the load average is used. $TOP would be defined in your xymonclient.cfg file for the client. What does the head of "top -b -n 1" look like on your system?
Tom
On Thu, Jul 24, 2025 at 3:39 AM Becker Christian via Xymon <xymon@xymon.com> wrote:
Hi to the list,
working with xymon since 2008, still using it.
Now I was in the situation to include a LinuxMint machine (with desktop environment), using Jeremy’s xymon-rclient.sh 0.6.1 to monitor this thing.
After setting up the ssh-based authentication and waiting a couple of minutes, the data of this LinuxMint machine came up and appeared in Xymon.
Other than other machines i’m pulling with xymon-rclient.sh, the CPU state of this machine became red immediately.
It seems to me that the Load Average of the LinuxMint machine is interpreted wrong: when looking in Xymon, it tells me a Load Average of 60.00, while looking to the LinuxMint machine, seeing it’s Load Average at 0.6.
What could be wrong? The LinuxMint machine is running LinuxMint 22.1 with it’s lates updates.
These are the locales used by the LinuxMint machine:
LANG=en_US.UTF-8
LANGUAGE=en_US
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC=de_DE.UTF-8
LC_TIME=de_DE.UTF-8
LC_COLLATE="en_US.UTF-8"
LC_MONETARY=de_DE.UTF-8
LC_MESSAGES="en_US.UTF-8"
LC_PAPER=de_DE.UTF-8
LC_NAME=de_DE.UTF-8
LC_ADDRESS=de_DE.UTF-8
LC_TELEPHONE=de_DE.UTF-8
LC_MEASUREMENT=de_DE.UTF-8
LC_IDENTIFICATION=de_DE.UTF-8
LC_ALL=
Yes, they are mixed….
We’ve a few other linux client machines running “non-server-linuxes” (i.e. RaspberryPi running Raspberry PI OS) which are reporting fine using xymon-rclient.sh.
Regards
Christian
Xymon mailing list -- xymon@xymon.com To unsubscribe send an email to xymon-leave@xymon.com
Looking at the server side code, the cpu load average for a linux client is actually extracted from the [uptime] section, not the [top] section, which surprised me a little.
(i.e. the sections as generated in the output of /usr/lib/xymon/client/bin/xymonclient-linux.sh)
The [uptime] section is the output of just running "uptime". The server code looks for the string "load average: " or "load averages: ", then after that looks for either of the patterns "FLOAT, FLOAT, FLOAT" or "FLOAT FLOAT FLOAT". The middle float from that list is then reported as the CPU load.
Christian: what does the output of "uptime" look like on your client?
Adam
On 24/07/2025 19:06, Tom Schmidt wrote:
Christian, Looking at xymon-rclient.sh, it will grab the load average from the "top" command. I assume for your configuration that it is using the xymonclient-linux.sh script to collect the data. If so, it runs "$TOP - b -n 1" and the line near the top that has the load average is used.
$TOP would be defined in your xymonclient.cfg file for the client. What does the head of "top -b -n 1" look like on your system?Tom
On Thu, Jul 24, 2025 at 3:39 AM Becker Christian via Xymon <xymon@xymon.com <mailto:xymon@xymon.com>> wrote:
Hi to the list,____ __ __ working with xymon since 2008, still using it.____ __ __ Now I was in the situation to include a LinuxMint machine (with desktop environment), using Jeremy’s xymon-rclient.sh 0.6.1 to monitor this thing.____ After setting up the ssh-based authentication and waiting a couple of minutes, the data of this LinuxMint machine came up and appeared in Xymon.____ __ __ Other than other machines i’m pulling with xymon-rclient.sh, the CPU state of this machine became red immediately.____ It seems to me that the Load Average of the LinuxMint machine is interpreted wrong: when looking in Xymon, it tells me a Load Average of 60.00, while looking to the LinuxMint machine, seeing it’s Load Average at 0.6.____ __ __ What could be wrong? The LinuxMint machine is running LinuxMint 22.1 with it’s lates updates.____ These are the locales used by the LinuxMint machine:____ __ __ LANG=en_US.UTF-8____ LANGUAGE=en_US____ LC_CTYPE="en_US.UTF-8"____ LC_NUMERIC=de_DE.UTF-8____ LC_TIME=de_DE.UTF-8____ LC_COLLATE="en_US.UTF-8"____ LC_MONETARY=de_DE.UTF-8____ LC_MESSAGES="en_US.UTF-8"____ LC_PAPER=de_DE.UTF-8____ LC_NAME=de_DE.UTF-8____ LC_ADDRESS=de_DE.UTF-8____ LC_TELEPHONE=de_DE.UTF-8____ LC_MEASUREMENT=de_DE.UTF-8____ LC_IDENTIFICATION=de_DE.UTF-8____ LC_ALL=____ __ __ Yes, they are mixed….____ __ __ We’ve a few other linux client machines running “non-server- linuxes” (i.e. RaspberryPi running Raspberry PI OS) which are reporting fine using xymon-rclient.sh.____ __ __ Regards____ Christian____ _______________________________________________ Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com> To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon- leave@xymon.com>
Xymon mailing list -- xymon@xymon.com To unsubscribe send an email to xymon-leave@xymon.com
Adam,
thx for your help.
The output of uptime is:
13:02:45 up 23:03, 4 users, load average: 0,60, 0,13, 0,04
Nearly at the same time I get this in Xymon:
[cid:image001.png@01DBFD64.9A9E3CA0]
Regards
-----Ursprüngliche Nachricht----- Von: Adam Thorn via Xymon <xymon@xymon.com> Gesendet: Freitag, 25. Juli 2025 10:24 An: xymon@xymon.com Cc: Adam Thorn <alt36@cam.ac.uk> Betreff: [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Looking at the server side code, the cpu load average for a linux client is actually extracted from the [uptime] section, not the [top] section, which surprised me a little.
(i.e. the sections as generated in the output of
/usr/lib/xymon/client/bin/xymonclient-linux.sh)
The [uptime] section is the output of just running "uptime". The server code looks for the string "load average: " or "load averages: ", then after that looks for either of the patterns "FLOAT, FLOAT, FLOAT" or "FLOAT FLOAT FLOAT". The middle float from that list is then reported as the CPU load.
Christian: what does the output of "uptime" look like on your client?
Adam
On 24/07/2025 19:06, Tom Schmidt wrote:
Christian,
Looking at xymon-rclient.sh, it will grab the load average from
the "top" command. I assume for your configuration that it is using
the xymonclient-linux.sh script to collect the data. If so, it runs
"$TOP - b -n 1" and the line near the top that has the load average is used.
$TOP would be defined in your xymonclient.cfg file for the client.
What does the head of "top -b -n 1" look like on your system?
Tom
On Thu, Jul 24, 2025 at 3:39 AM Becker Christian via Xymon
<xymon@xymon.com <mailto:xymon@xymon.com<mailto:xymon@xymon.com%20%3cmailto:xymon@xymon.com>>> wrote:
Hi to the list,____
__ __
working with xymon since 2008, still using it.____
__ __
Now I was in the situation to include a LinuxMint machine (with
desktop environment), using Jeremy’s xymon-rclient.sh 0.6.1 to
monitor this thing.____
After setting up the ssh-based authentication and waiting a couple
of minutes, the data of this LinuxMint machine came up and appeared
in Xymon.____
__ __
Other than other machines i’m pulling with xymon-rclient.sh, the CPU
state of this machine became red immediately.____
It seems to me that the Load Average of the LinuxMint machine is
interpreted wrong: when looking in Xymon, it tells me a Load Average
of 60.00, while looking to the LinuxMint machine, seeing it’s Load
Average at 0.6.____
__ __
What could be wrong? The LinuxMint machine is running LinuxMint 22.1
with it’s lates updates.____
These are the locales used by the LinuxMint machine:____
__ __
LANG=en_US.UTF-8____
LANGUAGE=en_US____
LC_CTYPE="en_US.UTF-8"____
LC_NUMERIC=de_DE.UTF-8____
LC_TIME=de_DE.UTF-8____
LC_COLLATE="en_US.UTF-8"____
LC_MONETARY=de_DE.UTF-8____
LC_MESSAGES="en_US.UTF-8"____
LC_PAPER=de_DE.UTF-8____
LC_NAME=de_DE.UTF-8____
LC_ADDRESS=de_DE.UTF-8____
LC_TELEPHONE=de_DE.UTF-8____
LC_MEASUREMENT=de_DE.UTF-8____
LC_IDENTIFICATION=de_DE.UTF-8____
LC_ALL=____
__ __
Yes, they are mixed….____
__ __
We’ve a few other linux client machines running “non-server-
linuxes” (i.e. RaspberryPi running Raspberry PI OS) which are
reporting fine using xymon-rclient.sh.____
__ __
Regards____
Christian____
_______________________________________________
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com> <mailto:xymon@xymon.com>
To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com> <mailto:xymon-
leave@xymon.com<mailto:leave@xymon.com>>
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com>
To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com>
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com>
To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com>
Seems like a locale issue. The decimal point is a comma so the server ignores the leading zero.
On Fri, 25 Jul 2025, 12:04 Becker Christian via Xymon, <xymon@xymon.com> wrote:
Adam,
thx for your help.
The output of uptime is:
13:02:45 up 23:03, 4 users, load average: 0,60, 0,13, 0,04
Nearly at the same time I get this in Xymon:
Regards
-----Ursprüngliche Nachricht----- Von: Adam Thorn via Xymon <xymon@xymon.com> Gesendet: Freitag, 25. Juli 2025 10:24 An: xymon@xymon.com Cc: Adam Thorn <alt36@cam.ac.uk> Betreff: [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Looking at the server side code, the cpu load average for a linux client is actually extracted from the [uptime] section, not the [top] section, which surprised me a little.
(i.e. the sections as generated in the output of
/usr/lib/xymon/client/bin/xymonclient-linux.sh)
The [uptime] section is the output of just running "uptime". The server code looks for the string "load average: " or "load averages: ", then after that looks for either of the patterns "FLOAT, FLOAT, FLOAT" or "FLOAT FLOAT FLOAT". The middle float from that list is then reported as the CPU load.
Christian: what does the output of "uptime" look like on your client?
Adam
On 24/07/2025 19:06, Tom Schmidt wrote:
Christian,
Looking at xymon-rclient.sh, it will grab the load average fromthe "top" command. I assume for your configuration that it is using
the xymonclient-linux.sh script to collect the data. If so, it runs
"$TOP - b -n 1" and the line near the top that has the load average is used.
$TOP would be defined in your xymonclient.cfg file for the client.
What does the head of "top -b -n 1" look like on your system?Tom
On Thu, Jul 24, 2025 at 3:39 AM Becker Christian via Xymon
<xymon@xymon.com <mailto:xymon@xymon.com>> wrote:
Hi to the list,______ __working with xymon since 2008, still using it.______ __Now I was in the situation to include a LinuxMint machine (withdesktop environment), using Jeremy’s xymon-rclient.sh 0.6.1 tomonitor this thing.____After setting up the ssh-based authentication and waiting a coupleof minutes, the data of this LinuxMint machine came up and appearedin Xymon.______ __Other than other machines i’m pulling with xymon-rclient.sh, the CPUstate of this machine became red immediately.____It seems to me that the Load Average of the LinuxMint machine isinterpreted wrong: when looking in Xymon, it tells me a Load Averageof 60.00, while looking to the LinuxMint machine, seeing it’s LoadAverage at 0.6.______ __What could be wrong? The LinuxMint machine is running LinuxMint 22.1with it’s lates updates.____These are the locales used by the LinuxMint machine:______ __LANG=en_US.UTF-8____LANGUAGE=en_US____LC_CTYPE="en_US.UTF-8"____LC_NUMERIC=de_DE.UTF-8____LC_TIME=de_DE.UTF-8____LC_COLLATE="en_US.UTF-8"____LC_MONETARY=de_DE.UTF-8____LC_MESSAGES="en_US.UTF-8"____LC_PAPER=de_DE.UTF-8____LC_NAME=de_DE.UTF-8____LC_ADDRESS=de_DE.UTF-8____LC_TELEPHONE=de_DE.UTF-8____LC_MEASUREMENT=de_DE.UTF-8____LC_IDENTIFICATION=de_DE.UTF-8____LC_ALL=______ __Yes, they are mixed….______ __We’ve a few other linux client machines running “non-server-linuxes” (i.e. RaspberryPi running Raspberry PI OS) which arereporting fine using xymon-rclient.sh.______ __Regards____Christian___________________________________________________Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com<xymon@xymon.com>>
To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon-leave@xymon.com>
Xymon mailing list -- xymon@xymon.com
To unsubscribe send an email to xymon-leave@xymon.com
Xymon mailing list -- xymon@xymon.com
To unsubscribe send an email to xymon-leave@xymon.com
Xymon mailing list -- xymon@xymon.com To unsubscribe send an email to xymon-leave@xymon.com
Yes, indeed this is a good point – i’ll start over changing it and see what happens
Von: Ron Cohen <rcohen55@gmail.com> Gesendet: Freitag, 25. Juli 2025 13:32 An: Xymon mailinglist <xymon@xymon.com> Betreff: [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Seems like a locale issue. The decimal point is a comma so the server ignores the leading zero.
On Fri, 25 Jul 2025, 12:04 Becker Christian via Xymon, <xymon@xymon.com<mailto:xymon@xymon.com>> wrote:
Adam,
thx for your help.
The output of uptime is:
13:02:45 up 23:03, 4 users, load average: 0,60, 0,13, 0,04
Nearly at the same time I get this in Xymon:
[cid:image001.png@01DBFD6B.2AECEDA0]
Regards
-----Ursprüngliche Nachricht----- Von: Adam Thorn via Xymon <xymon@xymon.com<mailto:xymon@xymon.com>> Gesendet: Freitag, 25. Juli 2025 10:24 An: xymon@xymon.com<mailto:xymon@xymon.com> Cc: Adam Thorn <alt36@cam.ac.uk<mailto:alt36@cam.ac.uk>> Betreff: [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Looking at the server side code, the cpu load average for a linux client is actually extracted from the [uptime] section, not the [top] section, which surprised me a little.
(i.e. the sections as generated in the output of
/usr/lib/xymon/client/bin/xymonclient-linux.sh)
The [uptime] section is the output of just running "uptime". The server code looks for the string "load average: " or "load averages: ", then after that looks for either of the patterns "FLOAT, FLOAT, FLOAT" or "FLOAT FLOAT FLOAT". The middle float from that list is then reported as the CPU load.
Christian: what does the output of "uptime" look like on your client?
Adam
On 24/07/2025 19:06, Tom Schmidt wrote:
Christian,
Looking at xymon-rclient.sh, it will grab the load average from
the "top" command. I assume for your configuration that it is using
the xymonclient-linux.sh script to collect the data. If so, it runs
"$TOP - b -n 1" and the line near the top that has the load average is used.
$TOP would be defined in your xymonclient.cfg file for the client.
What does the head of "top -b -n 1" look like on your system?
Tom
On Thu, Jul 24, 2025 at 3:39 AM Becker Christian via Xymon
<xymon@xymon.com <mailto:xymon@xymon.com<mailto:xymon@xymon.com%20%3cmailto:xymon@xymon.com>>> wrote:
Hi to the list,____
__ __
working with xymon since 2008, still using it.____
__ __
Now I was in the situation to include a LinuxMint machine (with
desktop environment), using Jeremy’s xymon-rclient.sh 0.6.1 to
monitor this thing.____
After setting up the ssh-based authentication and waiting a couple
of minutes, the data of this LinuxMint machine came up and appeared
in Xymon.____
__ __
Other than other machines i’m pulling with xymon-rclient.sh, the CPU
state of this machine became red immediately.____
It seems to me that the Load Average of the LinuxMint machine is
interpreted wrong: when looking in Xymon, it tells me a Load Average
of 60.00, while looking to the LinuxMint machine, seeing it’s Load
Average at 0.6.____
__ __
What could be wrong? The LinuxMint machine is running LinuxMint 22.1
with it’s lates updates.____
These are the locales used by the LinuxMint machine:____
__ __
LANG=en_US.UTF-8____
LANGUAGE=en_US____
LC_CTYPE="en_US.UTF-8"____
LC_NUMERIC=de_DE.UTF-8____
LC_TIME=de_DE.UTF-8____
LC_COLLATE="en_US.UTF-8"____
LC_MONETARY=de_DE.UTF-8____
LC_MESSAGES="en_US.UTF-8"____
LC_PAPER=de_DE.UTF-8____
LC_NAME=de_DE.UTF-8____
LC_ADDRESS=de_DE.UTF-8____
LC_TELEPHONE=de_DE.UTF-8____
LC_MEASUREMENT=de_DE.UTF-8____
LC_IDENTIFICATION=de_DE.UTF-8____
LC_ALL=____
__ __
Yes, they are mixed….____
__ __
We’ve a few other linux client machines running “non-server-
linuxes” (i.e. RaspberryPi running Raspberry PI OS) which are
reporting fine using xymon-rclient.sh.____
__ __
Regards____
Christian____
_______________________________________________
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com> <mailto:xymon@xymon.com>
To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com> <mailto:xymon-<mailto:xymon->
leave@xymon.com<mailto:leave@xymon.com>>
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com>
To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com>
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com>
To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com>
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com> To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com>
It really was a locale issue. After applying en_US.UTF-8 as locale, rebooting the LinuxMint machine, and another run of xymon-rclient.sh, the CPU check is fine within Xymon.
Thx all!
Von: Becker Christian via Xymon <xymon@xymon.com> Gesendet: Freitag, 25. Juli 2025 13:51 An: Xymon mailinglist <xymon@xymon.com> Cc: Becker Christian <christian.becker@rhein-zeitung.net> Betreff: [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Yes, indeed this is a good point – i’ll start over changing it and see what happens
Von: Ron Cohen <rcohen55@gmail.com<mailto:rcohen55@gmail.com>> Gesendet: Freitag, 25. Juli 2025 13:32 An: Xymon mailinglist <xymon@xymon.com<mailto:xymon@xymon.com>> Betreff: [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Seems like a locale issue. The decimal point is a comma so the server ignores the leading zero.
On Fri, 25 Jul 2025, 12:04 Becker Christian via Xymon, <xymon@xymon.com<mailto:xymon@xymon.com>> wrote:
Adam,
thx for your help.
The output of uptime is:
13:02:45 up 23:03, 4 users, load average: 0,60, 0,13, 0,04
Nearly at the same time I get this in Xymon:
[cid:image001.png@01DBFD6E.46B0E6B0]
Regards
-----Ursprüngliche Nachricht----- Von: Adam Thorn via Xymon <xymon@xymon.com<mailto:xymon@xymon.com>> Gesendet: Freitag, 25. Juli 2025 10:24 An: xymon@xymon.com<mailto:xymon@xymon.com> Cc: Adam Thorn <alt36@cam.ac.uk<mailto:alt36@cam.ac.uk>> Betreff: [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Looking at the server side code, the cpu load average for a linux client is actually extracted from the [uptime] section, not the [top] section, which surprised me a little.
(i.e. the sections as generated in the output of
/usr/lib/xymon/client/bin/xymonclient-linux.sh)
The [uptime] section is the output of just running "uptime". The server code looks for the string "load average: " or "load averages: ", then after that looks for either of the patterns "FLOAT, FLOAT, FLOAT" or "FLOAT FLOAT FLOAT". The middle float from that list is then reported as the CPU load.
Christian: what does the output of "uptime" look like on your client?
Adam
On 24/07/2025 19:06, Tom Schmidt wrote:
Christian,
Looking at xymon-rclient.sh, it will grab the load average from
the "top" command. I assume for your configuration that it is using
the xymonclient-linux.sh script to collect the data. If so, it runs
"$TOP - b -n 1" and the line near the top that has the load average is used.
$TOP would be defined in your xymonclient.cfg file for the client.
What does the head of "top -b -n 1" look like on your system?
Tom
On Thu, Jul 24, 2025 at 3:39 AM Becker Christian via Xymon
<xymon@xymon.com <mailto:xymon@xymon.com<mailto:xymon@xymon.com%20%3cmailto:xymon@xymon.com>>> wrote:
Hi to the list,____
__ __
working with xymon since 2008, still using it.____
__ __
Now I was in the situation to include a LinuxMint machine (with
desktop environment), using Jeremy’s xymon-rclient.sh 0.6.1 to
monitor this thing.____
After setting up the ssh-based authentication and waiting a couple
of minutes, the data of this LinuxMint machine came up and appeared
in Xymon.____
__ __
Other than other machines i’m pulling with xymon-rclient.sh, the CPU
state of this machine became red immediately.____
It seems to me that the Load Average of the LinuxMint machine is
interpreted wrong: when looking in Xymon, it tells me a Load Average
of 60.00, while looking to the LinuxMint machine, seeing it’s Load
Average at 0.6.____
__ __
What could be wrong? The LinuxMint machine is running LinuxMint 22.1
with it’s lates updates.____
These are the locales used by the LinuxMint machine:____
__ __
LANG=en_US.UTF-8____
LANGUAGE=en_US____
LC_CTYPE="en_US.UTF-8"____
LC_NUMERIC=de_DE.UTF-8____
LC_TIME=de_DE.UTF-8____
LC_COLLATE="en_US.UTF-8"____
LC_MONETARY=de_DE.UTF-8____
LC_MESSAGES="en_US.UTF-8"____
LC_PAPER=de_DE.UTF-8____
LC_NAME=de_DE.UTF-8____
LC_ADDRESS=de_DE.UTF-8____
LC_TELEPHONE=de_DE.UTF-8____
LC_MEASUREMENT=de_DE.UTF-8____
LC_IDENTIFICATION=de_DE.UTF-8____
LC_ALL=____
__ __
Yes, they are mixed….____
__ __
We’ve a few other linux client machines running “non-server-
linuxes” (i.e. RaspberryPi running Raspberry PI OS) which are
reporting fine using xymon-rclient.sh.____
__ __
Regards____
Christian____
_______________________________________________
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com> <mailto:xymon@xymon.com>
To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com> <mailto:xymon-<mailto:xymon->
leave@xymon.com<mailto:leave@xymon.com>>
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com>
To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com>
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com>
To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com>
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com> To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com>
I think it's LC_NUMERIC that matters here. I think the underlying bug here is that the server code uses sscanf() to parse uptime, and I guess that's not properly locale-aware.
A possible workaround if you want to maintain your locale comes from noting that xymonclient-linux.sh just runs "uptime" which thus implicitly uses whichever "uptime" is first on your path. On my systems that's /usr/bin/uptime, so I could provide /usr/local/bin/uptime with:
#!/bin/bash LC_NUMERIC=C /usr/bin/uptime
to just run uptime with the expected locale. Or, I see multiple sscanf() calls in xymond_client.c so maybe there are similar bugs lurking elsewhere... So, you could edit the xymonclient-linux.sh script sent by xymon-rclient.sh and put
LC_NUMERIC=C (and perhaps other locale variables if necessary? Or just LC_ALL?)
at the top of the script.
Regards,
Adam
On 25/07/2025 13:13, Becker Christian via Xymon wrote:
It really was a locale issue. After applying en_US.UTF-8as locale, rebooting the LinuxMint machine, and another run of xymon-rclient.sh, the CPU check is fine within Xymon.
Thx all!
*Von:*Becker Christian via Xymon <xymon@xymon.com> *Gesendet:* Freitag, 25. Juli 2025 13:51 *An:* Xymon mailinglist <xymon@xymon.com> *Cc:* Becker Christian <christian.becker@rhein-zeitung.net> *Betreff:* [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG:Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Yes, indeed this is a good point – i’ll start over changing it and see what happens
*Von:*Ron Cohen <rcohen55@gmail.com <mailto:rcohen55@gmail.com>> *Gesendet:* Freitag, 25. Juli 2025 13:32 *An:* Xymon mailinglist <xymon@xymon.com <mailto:xymon@xymon.com>> *Betreff:* [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG:Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Seems like a locale issue. The decimal point is a comma so the server ignores the leading zero.
On Fri, 25 Jul 2025, 12:04 Becker Christian via Xymon, <xymon@xymon.com <mailto:xymon@xymon.com>> wrote:
Adam, thx for your help. The output of uptime is: 13:02:45 up 23:03, 4 users, load average: 0,60, 0,13, 0,04 Nearly at the same time I get this in Xymon: Regards -----Ursprüngliche Nachricht----- Von: Adam Thorn via Xymon <xymon@xymon.com <mailto:xymon@xymon.com>> Gesendet: Freitag, 25. Juli 2025 10:24 An: xymon@xymon.com <mailto:xymon@xymon.com> Cc: Adam Thorn <alt36@cam.ac.uk <mailto:alt36@cam.ac.uk>> Betreff: [Xymon] Re: Issue with xymon-rclient.sh WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist. Looking at the server side code, the cpu load average for a linux client is actually extracted from the [uptime] section, not the [top] section, which surprised me a little. (i.e. the sections as generated in the output of /usr/lib/xymon/client/bin/xymonclient-linux.sh) The [uptime] section is the output of just running "uptime". The server code looks for the string "load average: " or "load averages: ", then after that looks for either of the patterns "FLOAT, FLOAT, FLOAT" or "FLOAT FLOAT FLOAT". The middle float from that list is then reported as the CPU load. Christian: what does the output of "uptime" look like on your client? Adam On 24/07/2025 19:06, Tom Schmidt wrote: > Christian, > Looking at xymon-rclient.sh, it will grab the load average from > the "top" command. I assume for your configuration that it is using > the xymonclient-linux.sh script to collect the data. If so, it runs > "$TOP - b -n 1" and the line near the top that has the load average is used. > $TOP would be defined in your xymonclient.cfg file for the client. > What does the head of "top -b -n 1" look like on your system? > > Tom > > On Thu, Jul 24, 2025 at 3:39 AM Becker Christian via Xymon > <xymon@xymon.com <mailto:xymon@xymon.com <mailto:xymon@xymon.com%20%3cmailto:xymon@xymon.com>>> wrote: > > Hi to the list,____ > > __ __ > > working with xymon since 2008, still using it.____ > > __ __ > > Now I was in the situation to include a LinuxMint machine (with > desktop environment), using Jeremy’s xymon-rclient.sh 0.6.1 to > monitor this thing.____ > > After setting up the ssh-based authentication and waiting a couple > of minutes, the data of this LinuxMint machine came up and appeared > in Xymon.____ > > __ __ > > Other than other machines i’m pulling with xymon-rclient.sh, the CPU > state of this machine became red immediately.____ > > It seems to me that the Load Average of the LinuxMint machine is > interpreted wrong: when looking in Xymon, it tells me a Load Average > of 60.00, while looking to the LinuxMint machine, seeing it’s Load > Average at 0.6.____ > > __ __ > > What could be wrong? The LinuxMint machine is running LinuxMint 22.1 > with it’s lates updates.____ > > These are the locales used by the LinuxMint machine:____ > > __ __ > > LANG=en_US.UTF-8____ > > LANGUAGE=en_US____ > > LC_CTYPE="en_US.UTF-8"____ > > LC_NUMERIC=de_DE.UTF-8____ > > LC_TIME=de_DE.UTF-8____ > > LC_COLLATE="en_US.UTF-8"____ > > LC_MONETARY=de_DE.UTF-8____ > > LC_MESSAGES="en_US.UTF-8"____ > > LC_PAPER=de_DE.UTF-8____ > > LC_NAME=de_DE.UTF-8____ > > LC_ADDRESS=de_DE.UTF-8____ > > LC_TELEPHONE=de_DE.UTF-8____ > > LC_MEASUREMENT=de_DE.UTF-8____ > > LC_IDENTIFICATION=de_DE.UTF-8____ > > LC_ALL=____ > > __ __ > > Yes, they are mixed….____ > > __ __ > > We’ve a few other linux client machines running “non-server- > linuxes” (i.e. RaspberryPi running Raspberry PI OS) which are > reporting fine using xymon-rclient.sh.____ > > __ __ > > Regards____ > > Christian____ > > _______________________________________________ > Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com> <mailto:xymon@xymon.com <mailto:xymon@xymon.com>> > To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon-leave@xymon.com> <mailto:xymon- <mailto:xymon-> > leave@xymon.com <mailto:leave@xymon.com>> > > > _______________________________________________ > Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com> > To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon-leave@xymon.com> _______________________________________________ Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com> To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon- leave@xymon.com> _______________________________________________ Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com> To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon- leave@xymon.com>
Xymon mailing list -- xymon@xymon.com To unsubscribe send an email to xymon-leave@xymon.com
Another option is to add an env() to the RCLIENT settings in hosts.cfg, such as:
127.0.0.42 cb-m340c # "RCLIENT:cmd(ssh -T user@%{H}),env(LC_NUMERIC=C)"
On Sat, 26 Jul 2025 at 02:16, Adam Thorn via Xymon <xymon@xymon.com> wrote:
I think it's LC_NUMERIC that matters here. I think the underlying bug here is that the server code uses sscanf() to parse uptime, and I guess that's not properly locale-aware.
A possible workaround if you want to maintain your locale comes from noting that xymonclient-linux.sh just runs "uptime" which thus implicitly uses whichever "uptime" is first on your path. On my systems that's /usr/bin/uptime, so I could provide /usr/local/bin/uptime with:
#!/bin/bash LC_NUMERIC=C /usr/bin/uptime
to just run uptime with the expected locale. Or, I see multiple sscanf() calls in xymond_client.c so maybe there are similar bugs lurking elsewhere... So, you could edit the xymonclient-linux.sh script sent by xymon-rclient.sh and put
LC_NUMERIC=C (and perhaps other locale variables if necessary? Or just LC_ALL?)
at the top of the script.
Regards,
Adam
On 25/07/2025 13:13, Becker Christian via Xymon wrote:
It really was a locale issue. After applying en_US.UTF-8as locale, rebooting the LinuxMint machine, and another run of xymon-rclient.sh, the CPU check is fine within Xymon.
Thx all!
*Von:*Becker Christian via Xymon <xymon@xymon.com> *Gesendet:* Freitag, 25. Juli 2025 13:51 *An:* Xymon mailinglist <xymon@xymon.com> *Cc:* Becker Christian <christian.becker@rhein-zeitung.net> *Betreff:* [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG:Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Yes, indeed this is a good point – i’ll start over changing it and see what happens
*Von:*Ron Cohen <rcohen55@gmail.com <mailto:rcohen55@gmail.com>> *Gesendet:* Freitag, 25. Juli 2025 13:32 *An:* Xymon mailinglist <xymon@xymon.com <mailto:xymon@xymon.com>> *Betreff:* [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG:Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Seems like a locale issue. The decimal point is a comma so the server ignores the leading zero.
On Fri, 25 Jul 2025, 12:04 Becker Christian via Xymon, <xymon@xymon.com <mailto:xymon@xymon.com>> wrote:
Adam, thx for your help. The output of uptime is: 13:02:45 up 23:03, 4 users, load average: 0,60, 0,13, 0,04 Nearly at the same time I get this in Xymon: Regards -----Ursprüngliche Nachricht----- Von: Adam Thorn via Xymon <xymon@xymon.com <mailto:xymon@xymon.com>> Gesendet: Freitag, 25. Juli 2025 10:24 An: xymon@xymon.com <mailto:xymon@xymon.com> Cc: Adam Thorn <alt36@cam.ac.uk <mailto:alt36@cam.ac.uk>> Betreff: [Xymon] Re: Issue with xymon-rclient.sh WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist. Looking at the server side code, the cpu load average for a linux client is actually extracted from the [uptime] section, not the [top] section, which surprised me a little. (i.e. the sections as generated in the output of /usr/lib/xymon/client/bin/xymonclient-linux.sh) The [uptime] section is the output of just running "uptime". The server code looks for the string "load average: " or "load averages: ", then after that looks for either of the patterns "FLOAT, FLOAT, FLOAT" or "FLOAT FLOAT FLOAT". The middle float from that list is then reported as the CPU load. Christian: what does the output of "uptime" look like on your client? Adam On 24/07/2025 19:06, Tom Schmidt wrote: > Christian, > Looking at xymon-rclient.sh, it will grab the load averagefrom
> the "top" command. I assume for your configuration that it isusing
> the xymonclient-linux.sh script to collect the data. If so, itruns
> "$TOP - b -n 1" and the line near the top that has the load average is used. > $TOP would be defined in your xymonclient.cfg file for the client. > What does the head of "top -b -n 1" look like on your system? > > Tom > > On Thu, Jul 24, 2025 at 3:39 AM Becker Christian via Xymon > <xymon@xymon.com <mailto:xymon@xymon.com <mailto:xymon@xymon.com%20%3cmailto:xymon@xymon.com>>> wrote: > > Hi to the list,____ > > __ __ > > working with xymon since 2008, still using it.____ > > __ __ > > Now I was in the situation to include a LinuxMint machine(with
> desktop environment), using Jeremy’s xymon-rclient.sh 0.6.1 to > monitor this thing.____ > > After setting up the ssh-based authentication and waiting a couple > of minutes, the data of this LinuxMint machine came up and appeared > in Xymon.____ > > __ __ > > Other than other machines i’m pulling with xymon-rclient.sh, the CPU > state of this machine became red immediately.____ > > It seems to me that the Load Average of the LinuxMint machineis
> interpreted wrong: when looking in Xymon, it tells me a Load Average > of 60.00, while looking to the LinuxMint machine, seeing it’s Load > Average at 0.6.____ > > __ __ > > What could be wrong? The LinuxMint machine is running LinuxMint 22.1 > with it’s lates updates.____ > > These are the locales used by the LinuxMint machine:____ > > __ __ > > LANG=en_US.UTF-8____ > > LANGUAGE=en_US____ > > LC_CTYPE="en_US.UTF-8"____ > > LC_NUMERIC=de_DE.UTF-8____ > > LC_TIME=de_DE.UTF-8____ > > LC_COLLATE="en_US.UTF-8"____ > > LC_MONETARY=de_DE.UTF-8____ > > LC_MESSAGES="en_US.UTF-8"____ > > LC_PAPER=de_DE.UTF-8____ > > LC_NAME=de_DE.UTF-8____ > > LC_ADDRESS=de_DE.UTF-8____ > > LC_TELEPHONE=de_DE.UTF-8____ > > LC_MEASUREMENT=de_DE.UTF-8____ > > LC_IDENTIFICATION=de_DE.UTF-8____ > > LC_ALL=____ > > __ __ > > Yes, they are mixed….____ > > __ __ > > We’ve a few other linux client machines running “non-server- > linuxes” (i.e. RaspberryPi running Raspberry PI OS) which are > reporting fine using xymon-rclient.sh.____ > > __ __ > > Regards____ > > Christian____ > > _______________________________________________ > Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com> <mailto:xymon@xymon.com <mailto:xymon@xymon.com>> > To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon-leave@xymon.com> <mailto:xymon- <mailto:xymon-> > leave@xymon.com <mailto:leave@xymon.com>> > > > _______________________________________________ > Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com> > To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon-leave@xymon.com> _______________________________________________ Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com> To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon- leave@xymon.com> _______________________________________________ Xymon mailing list -- xymon@xymon.com <mailto:xymon@xymon.com> To unsubscribe send an email to xymon-leave@xymon.com <mailto:xymon- leave@xymon.com>
Xymon mailing list -- xymon@xymon.com To unsubscribe send an email to xymon-leave@xymon.com
Xymon mailing list -- xymon@xymon.com To unsubscribe send an email to xymon-leave@xymon.com
That’s by far my favourite solution, because then for me there’s no need to change the locales on the LinuxMint system….
Thank you!
Von: Jeremy Laidman <jeremy@laidman.org> Gesendet: Samstag, 26. Juli 2025 08:48 An: Xymon mailinglist <xymon@xymon.com> Cc: Adam Thorn <alt36@cam.ac.uk> Betreff: [Xymon] Re: Issue with xymon-rclient.sh
WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Another option is to add an env() to the RCLIENT settings in hosts.cfg, such as:
127.0.0.42 cb-m340c # "RCLIENT:cmd(ssh -T user@%{H}),env(LC_NUMERIC=C)"
Tom,
thx for your help.
The output of top -b -n 1 is:
top - 12:42:33 up 22:43, 4 users, load average: 0,04, 0,04, 0,00 Tasks: 242 total, 1 running, 241 sleeping, 0 stopped, 0 zombie %Cpu(s): 7,4 us, 3,7 sy, 0,0 ni, 88,9 id, 0,0 wa, 0,0 hi, 0,0 si, 0,0 st MiB Mem : 3618,2 total, 390,7 free, 1124,9 used, 2416,0 buff/cache MiB Swap: 4020,0 total, 4019,2 free, 0,8 used. 2493,3 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
59020 becker 20 0 14880 5760 3712 R 23,1 0,2 0:00.07 top 1 root 20 0 22648 13540 9444 S 0,0 0,4 0:17.14 systemd 2 root 20 0 0 0 0 S 0,0 0,0 0:00.05 kthreadd 3 root 20 0 0 0 0 S 0,0 0,0 0:00.00 pool_wo+ 4 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker+ 5 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker+ 6 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker+ 7 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker+ 10 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker+ 12 root 0 -20 0 0 0 I 0,0 0,0 0:00.00 kworker+ 13 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tas+ 14 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tas+ 15 root 20 0 0 0 0 I 0,0 0,0 0:00.00 rcu_tas+ 16 root 20 0 0 0 0 S 0,0 0,0 0:00.46 ksoftir+ 17 root 20 0 0 0 0 I 0,0 0,0 0:24.40 rcu_pre+ 18 root rt 0 0 0 0 S 0,0 0,0 0:00.78 migrati+
Regards Christian
Von: Tom Schmidt <tom@4schmidts.com> Gesendet: Donnerstag, 24. Juli 2025 20:06 An: Xymon mailinglist <xymon@xymon.com> Cc: Becker Christian <christian.becker@rhein-zeitung.net> Betreff: Re: [Xymon] Issue with xymon-rclient.sh
WARNUNG: Diese E-Mail kam von außerhalb der Organisation. Klicken Sie nicht auf Links oder öffnen Sie keine Anhänge, es sei denn, Sie kennen den Absender und wissen, dass der Inhalt sicher ist.
Christian, Looking at xymon-rclient.sh, it will grab the load average from the "top" command. I assume for your configuration that it is using the xymonclient-linux.sh script to collect the data. If so, it runs "$TOP -b -n 1" and the line near the top that has the load average is used. $TOP would be defined in your xymonclient.cfg file for the client. What does the head of "top -b -n 1" look like on your system?
Tom
On Thu, Jul 24, 2025 at 3:39 AM Becker Christian via Xymon <xymon@xymon.com<mailto:xymon@xymon.com>> wrote: Hi to the list,
working with xymon since 2008, still using it.
Now I was in the situation to include a LinuxMint machine (with desktop environment), using Jeremy’s xymon-rclient.sh 0.6.1 to monitor this thing. After setting up the ssh-based authentication and waiting a couple of minutes, the data of this LinuxMint machine came up and appeared in Xymon.
Other than other machines i’m pulling with xymon-rclient.sh, the CPU state of this machine became red immediately. It seems to me that the Load Average of the LinuxMint machine is interpreted wrong: when looking in Xymon, it tells me a Load Average of 60.00, while looking to the LinuxMint machine, seeing it’s Load Average at 0.6.
What could be wrong? The LinuxMint machine is running LinuxMint 22.1 with it’s lates updates. These are the locales used by the LinuxMint machine:
LANG=en_US.UTF-8 LANGUAGE=en_US LC_CTYPE="en_US.UTF-8" LC_NUMERIC=de_DE.UTF-8 LC_TIME=de_DE.UTF-8 LC_COLLATE="en_US.UTF-8" LC_MONETARY=de_DE.UTF-8 LC_MESSAGES="en_US.UTF-8" LC_PAPER=de_DE.UTF-8 LC_NAME=de_DE.UTF-8 LC_ADDRESS=de_DE.UTF-8 LC_TELEPHONE=de_DE.UTF-8 LC_MEASUREMENT=de_DE.UTF-8 LC_IDENTIFICATION=de_DE.UTF-8 LC_ALL=
Yes, they are mixed….
We’ve a few other linux client machines running “non-server-linuxes” (i.e. RaspberryPi running Raspberry PI OS) which are reporting fine using xymon-rclient.sh.
Regards Christian
Xymon mailing list -- xymon@xymon.com<mailto:xymon@xymon.com> To unsubscribe send an email to xymon-leave@xymon.com<mailto:xymon-leave@xymon.com>
participants (5)
-
Adam Thorn
-
Becker Christian
-
Jeremy Laidman
-
Ron Cohen
-
Tom Schmidt