Yes the modification goes in the clientlaunch.cfg and no change is needed on the server side. I have these added to my clientlaunch.cfg for most sun machines:

[meta] ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/ext/meta LOGFILE $HOBBITCLIENTHOME/logs/meta.log INTERVAL 5m

[ntp] ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/ext/bb-ntp.sh LOGFILE $HOBBITCLIENTHOME/logs/bb-ntp.log INTERVAL 5m

[ntpstat] ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/ext/ntpstat.sh LOGFILE $HOBBITCLIENTHOME/logs/ntpstat.log INTERVAL 5m

[prtdiag] ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/ext/bb-prtdiag.sh LOGFILE $HOBBITCLIENTHOME/logs/bb-prtdiag.log INTERVAL 5m

[cpu2] ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/ext/bb-cpu2.sh LOGFILE $HOBBITCLIENTHOME/logs/bb-cpu2.log INTERVAL 5m

[msgs] ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/ext/bb-msgs.sh LOGFILE $HOBBITCLIENTHOME/logs/bb-msgs.log INTERVAL 5m

[sge] DISABLED ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/ext/sge.sh LOGFILE $HOBBITCLIENTHOME/logs/sge.log INTERVAL 5m

[vx] DISABLED ENVFILE $HOBBITCLIENTHOME/etc/hobbitclient.cfg CMD $HOBBITCLIENTHOME/ext/bb-vxcheck.sh LOGFILE $HOBBITCLIENTHOME/logs/bb-vxcheck.log INTERVAL 5m

SGE and VX check are enabled on the few hosts were it is needed. Richard

-----Original Message----- From: McGraw, Robert P. [mailto:rmcgraw at purdue.edu] Sent: Tuesday, January 24, 2006 10:30 AM To: hobbit at hswn.dk Subject: [hobbit] bb-prtdiag and temperature.sh question.

Richard,

Thanks for your reply.

When I think I understand how hobbit works, I seem to get confused again.

I see the modifications you suggest in hobbitclient.cfg and bb-prtdiag. No problem in making these.

I am confused where to set it to execute.

Let me see if I got how hobbit works on the client.

1. Hobbitlaunch reads the clientlaunch.cfg file.

2. Clientlaunch.cfg file reads hobbitclient.cfg file and executes hobbitclient.sh

3. hobbitclient.sh calls hobbitclient-sunos.sh (in my case) which executes the programs in hobbitclient-sunos.sh and writes the output to msg.txt.

4 hobbitclient.sh sends msg.txt to the $BBDISP.

Now I want to execute the bb-prtdiag and bb-prtdiag seems to send the data to $BBDISP inside the script.

Do I put the execution of $BBDISP in clientlaunch.cfg?

What do I need to do on the server side for this to show up in the hobbit html?

Thanks

Robert

---

From: Deal, Richard [mailto:rdeal at tigr.ORG] Sent: Tuesday, January 24, 2006 8:48 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Repeat entries in bb-hosts

I didn't have to modify bb-prtdiag at all to get it running under the hobbit client. You will have to modify the etc/hobbitclient.cfg file to represent your environment and the bb-prtdiag modifications should also be added. I have these lines added to hobbitclient.cfg: (might be some line modification by email but you get the idea)

#from prtdiag script

UNAME="/sbin/uname" #PLATFORM_SPEC=${UNAME} -i #PRTDIAG_COMMAND="/usr/platform/${PLATFORM_SPEC}/sbin/prtdiag" PRTDIAG_OPT="-v" ZONENAME=/usr/bin/zonename #Systems that don't support temperature checks EXCLUDE_SYSTEMS="Ultra-1 Ultra-2 Ultra-5_10 Ultra-30 Ultra-60 Ultra-80 UltraAX-i 2 UltraSPARC-IIi-cEngine Sun-Fire Netra-T4 UltraAX-e2 Ultra-Enterprise-10000" PRTDIAG_IGNORE_ERRORS="No failures|Most recent AC Power Failure|Minimum Availabl e|CS Fail|No Hardware failures|^===|currently no Boards|Fault     Fan" PRTDIAG_IGNORE_FAULTS="No Recent System Faults found|No System Faults found|Faul t Value|Fault LED|NO_FAULT|Power  Fault|Status Fault|Fault off" LOM_COMMAND="/usr/sbin/lom" LOM_OPT="-pfvt"

Woops there is one slight modification to the bb-prtdiag script.  Since hobbitclient.cfg does not allow for execution, just variable setting, I had to uncomment these two lines in bb-prtdiag: PLATFORM_SPEC=$UNAME -i PRTDIAG_COMMAND="/usr/platform/$PLATFORM_SPEC/sbin/prtdiag"

---

From: McGraw, Robert P. [mailto:rmcgraw at purdue.edu] Sent: Tuesday, January 24, 2006 8:34 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Repeat entries in bb-hosts

Has anyone rewritten the solaris temperature.sh and bb-prtdiag for hobbit? I would like to get these going on and just did not want to redo work that has already been done.

Thanks

Robert

---

Robert P. McGraw, Jr. Manager, Computer System                                         EMAIL: rmcgraw at purdue.edu Purdue University ROOM: MATH-807 Department of Mathematics                                        PHONE: (765) 494-6055 150 N. University Street FAX: (419) 821-0540 West Lafayette, IN 47907-2067