HELP- INSTALL CLIENT XYMON ON WINDOWS
An HTML attachment was scrubbed... URL: <http://lists.xymon.com/pipermail/xymon/attachments/20180307/aa6435de/attachment.html>
The PowerShell client only works in “Central” mode. So to monitor services and processes you need to add the relevant entries into your analysis.cfg file on your server.
Something like:
HOST=server01 SVC testservice status=started startup=automatic PROC test.exe 1 DISK * 95 98 DISK F IGNORE
For Disks it should pickup the disks automatically and use the values at the bottom of your analysis.cfg file or you can set your own values like above
The PowerShell client is much better than BBWin, it’s actively maintained and has a whole bunch of extra functionality and it’s written in PowerShell. On top of that it can replicate mostly everything BBwin already did with the exception of local mode. It even has its own update mechanism built into it and does hash checking on external scripts. It really is worth switching to.
For slimmode, I don’t actually use it but I do recall seeing something on this list about a bug in the current implementation, I’m not sure if that has been patched yet. You might be misunderstanding what slimmode does, it basically just stops certain sections of information being sent to the server so you can send smaller messages that contain less data. I assume this is for performance / security reasons. This is the information you will see in the clientlog column for the host in xymon. Or in you xymon powershell directory in the xymon-lastcollect.txt if you have that turned on. It is also the data that the server parses for each test so if you omit a bunch of services using slimmode then you won’t be able to report on their status.
Regards, Brandon Dale
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Kris Springer Sent: Thursday, 8 March 2018 3:58 PM To: John Palys <johnpalys at schoolpathways.com>; xymon at xymon.com Subject: Re: [Xymon] HELP- INSTALL CLIENT XYMON ON WINDOWS
Yes, I have been successfully using BBwin for many years with no trouble. I just thought I'd try out the Powershell client, but so far the customizations are not working. Anyone have a functioning sample config to specify Services and Processes?
Kris Springer
On 03/07/2018 03:33 PM, John Palys wrote: I also endorse bbwin. I used it a lot with original Big Brother and it works well. Simple to install, setup and maintain. See this page http://www.squidworks.net/2012/04/new-bbwin-gui-version-2-release-for-bbwin-...
They made a bbwin gui onfig file which helps in setup and maintenance of bbwin.
http://www.squidworks.net/wp-content/uploads/2012/04/BBWin_Gui-2.2.zip
On Wed, Mar 7, 2018 at 2:57 PM, Kris Springer <kspringer at innovateteam.com<mailto:kspringer at innovateteam.com>> wrote: I've also tried adding the slimmode option into the server's client-local.cfg, but that doesn't do anything either. How do you test for specific Services and Processes with the Powershell client. Following the instructions doesn't seem to work.
Kris Springer
On 03/06/2018 07:41 PM, Galen Johnson wrote: The powershell client is available at https://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/. Unlike bbwin, it is actively maintained.
=G=
On Tue, Mar 6, 2018 at 4:53 PM, Bruce Ferrell <bferrell at baywinds.org<mailto:bferrell at baywinds.org>> wrote: On 03/06/2018 12:43 PM, Pablo Padilla wrote: Hi..
can xymon-client be installed on windows server to monitor Drive Spaces???
Saludos cordiales, Pablo
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Pablo
There is a windows client called BBwin:
and bbwingui, also on sourceforge, for configuring bbwin.
I think there is also a client written in powershell. powershell irratates me so I don't use it
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list
Xymon at xymon.com<mailto:Xymon at xymon.com>
http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
-- John Palys Systems Administrator School Pathways, Inc. 866-200-6936 #2010 Office
Thanks for the info. I will try the analysis.cfg options you suggested. The problem is that the how-to for the PS client says that it works a certain way, but it doesn't seem to work that way. There's no mention of it being beta or non-functional.
Thanks, Kris Springer
-----Original Message----- From: Brandon Dale <BDale at kitchengroup.com.au> To: Kris Springer <kspringer at innovateteam.com>, John Palys <johnpalys at schoolpathways.com>, "xymon at xymon.com" <xymon at xymon.com> Sent: Wed, 07 Mar 2018 9:24 PM Subject: RE: [Xymon] HELP- INSTALL CLIENT XYMON ON WINDOWS
The PowerShell client only works in “Central” mode. So to monitor services and processes you need to add the relevant entries into your analysis.cfg file on your server.
Something like:
HOST=server01 SVC testservice status=started startup=automatic PROC test.exe 1 DISK * 95 98 DISK F IGNORE
For Disks it should pickup the disks automatically and use the values at the bottom of your analysis.cfg file or you can set your own values like above
The PowerShell client is much better than BBWin, it’s actively maintained and has a whole bunch of extra functionality and it’s written in PowerShell. On top of that it can replicate mostly everything BBwin already did with the exception of local mode. It even has its own update mechanism built into it and does hash checking on external scripts. It really is worth switching to.
For slimmode, I don’t actually use it but I do recall seeing something on this list about a bug in the current implementation, I’m not sure if that has been patched yet. You might be misunderstanding what slimmode does, it basically just stops certain sections of information being sent to the server so you can send smaller messages that contain less data. I assume this is for performance / security reasons. This is the information you will see in the clientlog column for the host in xymon. Or in you xymon powershell directory in the xymon-lastcollect.txt if you have that turned on. It is also the data that the server parses for each test so if you omit a bunch of services using slimmode then you won’t be able to report on their status.
Regards, Brandon Dale
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Kris Springer Sent: Thursday, 8 March 2018 3:58 PM To: John Palys <johnpalys at schoolpathways.com>; xymon at xymon.com Subject: Re: [Xymon] HELP- INSTALL CLIENT XYMON ON WINDOWS
Yes, I have been successfully using BBwin for many years with no trouble. I just thought I'd try out the Powershell client, but so far the customizations are not working. Anyone have a functioning sample config to specify Services and Processes?
Kris Springer
On 03/07/2018 03:33 PM, John Palys wrote: I also endorse bbwin. I used it a lot with original Big Brother and it works well. Simple to install, setup and maintain. See this page http://www.squidworks.net/2012/04/new-bbwin-gui-version-2-release-for-bbwin-...
They made a bbwin gui onfig file which helps in setup and maintenance of bbwin.
http://www.squidworks.net/wp-content/uploads/2012/04/BBWin_Gui-2.2.zip
On Wed, Mar 7, 2018 at 2:57 PM, Kris Springer <kspringer at innovateteam.com<mailto:kspringer at innovateteam.com>> wrote: I've also tried adding the slimmode option into the server's client-local.cfg, but that doesn't do anything either. How do you test for specific Services and Processes with the Powershell client. Following the instructions doesn't seem to work.
Kris Springer
On 03/06/2018 07:41 PM, Galen Johnson wrote: The powershell client is available at https://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/. Unlike bbwin, it is actively maintained.
=G=
On Tue, Mar 6, 2018 at 4:53 PM, Bruce Ferrell <bferrell at baywinds.org<mailto:bferrell at baywinds.org>> wrote: On 03/06/2018 12:43 PM, Pablo Padilla wrote: Hi..
can xymon-client be installed on windows server to monitor Drive Spaces???
Saludos cordiales, Pablo
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Pablo
There is a windows client called BBwin:
and bbwingui, also on sourceforge, for configuring bbwin.
I think there is also a client written in powershell. powershell irratates me so I don't use it
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list
Xymon at xymon.com<mailto:Xymon at xymon.com>
http://lists.xymon.com/mailman/listinfo/xymon
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
-- John Palys Systems Administrator School Pathways, Inc. 866-200-6936 #2010 Office
Hi
Exactly as Brandon says – slimmode is to reduce the amount of data returned by the client for bandwidth / security reasons.
The slimmode bug mentioned was patched in v2.28 which is the current version on sourceforge.
Thanks
Zak
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Brandon Dale Sent: Thursday, 8 March 2018 05:24 To: Kris Springer <kspringer at innovateteam.com>; John Palys <johnpalys at schoolpathways.com>; xymon at xymon.com Subject: [External] Re: [Xymon] HELP- INSTALL CLIENT XYMON ON WINDOWS
The PowerShell client only works in “Central” mode. So to monitor services and processes you need to add the relevant entries into your analysis.cfg file on your server.
Something like:
HOST=server01 SVC testservice status=started startup=automatic PROC test.exe 1 DISK * 95 98 DISK F IGNORE
For Disks it should pickup the disks automatically and use the values at the bottom of your analysis.cfg file or you can set your own values like above
The PowerShell client is much better than BBWin, it’s actively maintained and has a whole bunch of extra functionality and it’s written in PowerShell. On top of that it can replicate mostly everything BBwin already did with the exception of local mode. It even has its own update mechanism built into it and does hash checking on external scripts. It really is worth switching to.
For slimmode, I don’t actually use it but I do recall seeing something on this list about a bug in the current implementation, I’m not sure if that has been patched yet. You might be misunderstanding what slimmode does, it basically just stops certain sections of information being sent to the server so you can send smaller messages that contain less data. I assume this is for performance / security reasons. This is the information you will see in the clientlog column for the host in xymon. Or in you xymon powershell directory in the xymon-lastcollect.txt if you have that turned on. It is also the data that the server parses for each test so if you omit a bunch of services using slimmode then you won’t be able to report on their status.
Regards, Brandon Dale
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Kris Springer Sent: Thursday, 8 March 2018 3:58 PM To: John Palys <johnpalys at schoolpathways.com<mailto:johnpalys at schoolpathways.com>>; xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] HELP- INSTALL CLIENT XYMON ON WINDOWS
Yes, I have been successfully using BBwin for many years with no trouble. I just thought I'd try out the Powershell client, but so far the customizations are not working. Anyone have a functioning sample config to specify Services and Processes?
Kris Springer
On 03/07/2018 03:33 PM, John Palys wrote: I also endorse bbwin. I used it a lot with original Big Brother and it works well. Simple to install, setup and maintain. See this page http://www.squidworks.net/2012/04/new-bbwin-gui-version-2-release-for-bbwin-xymon-client/<https://urldefense.proofpoint.com/v2/url?u=http-3A__www.squidworks.net_2012_04_new-2Dbbwin-2Dgui-2Dversion-2D2-2Drelease-2Dfor-2Dbbwin-2Dxymon-2Dclient_&d=DwMGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=h92a4saV_nOT3ACnQW-Fy49slykelRGJ_TeD6TzrV4I&s=fa2Kr2Svt6s_4rbfPwa47crFlR9K250CWyWF4X7wBQA&e=>
They made a bbwin gui onfig file which helps in setup and maintenance of bbwin.
On Wed, Mar 7, 2018 at 2:57 PM, Kris Springer <kspringer at innovateteam.com<mailto:kspringer at innovateteam.com>> wrote: I've also tried adding the slimmode option into the server's client-local.cfg, but that doesn't do anything either. How do you test for specific Services and Processes with the Powershell client. Following the instructions doesn't seem to work.
Kris Springer
On 03/06/2018 07:41 PM, Galen Johnson wrote: The powershell client is available at https://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/<https://urldefense.proofpoint.com/v2/url?u=https-3A__sourceforge.net_p_xymon_code_HEAD_tree_sandbox_WinPSClient_&d=DwMGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=h92a4saV_nOT3ACnQW-Fy49slykelRGJ_TeD6TzrV4I&s=J_tYj9kw270uN7N16Jwws8rcSIC3m3m0QneLZ1MVXlI&e=>. Unlike bbwin, it is actively maintained.
=G=
On Tue, Mar 6, 2018 at 4:53 PM, Bruce Ferrell <bferrell at baywinds.org<mailto:bferrell at baywinds.org>> wrote: On 03/06/2018 12:43 PM, Pablo Padilla wrote: Hi..
can xymon-client be installed on windows server to monitor Drive Spaces???
Saludos cordiales, Pablo
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.xymon.com_mailman_listinfo_xymon&d=DwMGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=h92a4saV_nOT3ACnQW-Fy49slykelRGJ_TeD6TzrV4I&s=PZz5V3KPdBFNDfnB_jugirKOq87pYnRQdTvv4bye1gc&e=>
Pablo
There is a windows client called BBwin:
and bbwingui, also on sourceforge, for configuring bbwin.
I think there is also a client written in powershell. powershell irratates me so I don't use it
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.xymon.com_mailman_listinfo_xymon&d=DwMGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=h92a4saV_nOT3ACnQW-Fy49slykelRGJ_TeD6TzrV4I&s=PZz5V3KPdBFNDfnB_jugirKOq87pYnRQdTvv4bye1gc&e=>
Xymon mailing list
Xymon at xymon.com<mailto:Xymon at xymon.com>
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.xymon.com_mailman_listinfo_xymon&d=DwMGaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=h92a4saV_nOT3ACnQW-Fy49slykelRGJ_TeD6TzrV4I&s=PZz5V3KPdBFNDfnB_jugirKOq87pYnRQdTvv4bye1gc&e=>
-- John Palys Systems Administrator School Pathways, Inc. 866-200-6936 #2010 Office
This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy.
www.accenture.com
An HTML attachment was scrubbed... URL: <http://lists.xymon.com/pipermail/xymon/attachments/20180308/e9a10224/attachment.html>
participants (3)
-
BDale＠kitchengroup.com.au
-
kspringer＠innovateteam.com
-
zak.beck＠accenture.com