Good day
On one of my very busy severs (Centos7, tomcat8.5) the proc test fails
I noticed that on the SERVICES=procs page for the server only about 4 line are shown from the ps output. The problem only happens when the server is busy. I added more ram to the server but the result is the same. Memory usage on server is ok (Reported by xymon): Used Total Percentage Real/Physical 18464M 24070M 70% Actual 9041M 7999M 37% Swap/Page 39M 7999M 0%
The xymon client was installed from the Terabithia repo xymon-client-4.3.28-1.el7.x86_64
What do I need to change in my configs to remedy the problem please.
Kind regards
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/AUTOlogoW.png]
Chris Pretorius
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/phone.png]
0872367740
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/email.png]
chrisp at lightstone.co.za<mailto:chrisp at lightstone.co.za>
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/web.png]
www.signio.co.za<http://www.signio.co.za>
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/address.png]
Centurion Square, 3rd Floor, cnr Heuwel and Gordon Hood rd, Centurion
This communication is subject to Lightstone's email disclaimer<http://www.lightstone.co.za/portal/content/email-disclaimer.aspx>
You are probably also getting a yellow for xymond on your xymon server.
The data coming from that server is getting truncated. You need to increase the size of your message buffer.
From: Xymon <xymon-bounces at xymon.com> On Behalf Of Chris Pretorius Sent: Thursday, May 09, 2019 8:02 AM To: xymon at xymon.com Subject: [Xymon] proc test fails
Good day
On one of my very busy severs (Centos7, tomcat8.5) the proc test fails
I noticed that on the SERVICES=procs page for the server only about 4 line are shown from the ps output. The problem only happens when the server is busy. I added more ram to the server but the result is the same. Memory usage on server is ok (Reported by xymon): Used Total Percentage Real/Physical 18464M 24070M 70% Actual 9041M 7999M 37% Swap/Page 39M 7999M 0%
The xymon client was installed from the Terabithia repo xymon-client-4.3.28-1.el7.x86_64
What do I need to change in my configs to remedy the problem please.
Kind regards
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/AUTOlogoW.png]
Chris Pretorius
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/phone.png]
0872367740
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/email.png]
chrisp at lightstone.co.za<mailto:chrisp at lightstone.co.za>
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/web.png]
www.signio.co.za<http://www.signio.co.za>
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/address.png]
Centurion Square, 3rd Floor, cnr Heuwel and Gordon Hood rd, Centurion
This communication is subject to Lightstone's email disclaimer<http://www.lightstone.co.za/portal/content/email-disclaimer.aspx>
This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
Hi Paul
I made the changes and proc test now looking better.
I appreciate your help
Kind regards From: Root, Paul T <Paul.Root at CenturyLink.com> Sent: Thursday, May 9, 2019 3:21 PM To: Chris Pretorius <chrisp at lightstoneauto.co.za>; xymon at xymon.com Subject: RE: proc test fails
You are probably also getting a yellow for xymond on your xymon server.
The data coming from that server is getting truncated. You need to increase the size of your message buffer.
From: Xymon <xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>> On Behalf Of Chris Pretorius Sent: Thursday, May 09, 2019 8:02 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: [Xymon] proc test fails
Good day
On one of my very busy severs (Centos7, tomcat8.5) the proc test fails
I noticed that on the SERVICES=procs page for the server only about 4 line are shown from the ps output. The problem only happens when the server is busy. I added more ram to the server but the result is the same. Memory usage on server is ok (Reported by xymon): Used Total Percentage Real/Physical 18464M 24070M 70% Actual 9041M 7999M 37% Swap/Page 39M 7999M 0%
The xymon client was installed from the Terabithia repo xymon-client-4.3.28-1.el7.x86_64
What do I need to change in my configs to remedy the problem please.
Kind regards
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/AUTOlogoW.png]
Chris Pretorius
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/phone.png]
0872367740
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/email.png]
chrisp at lightstone.co.za<mailto:chrisp at lightstone.co.za>
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/web.png]
www.signio.co.za<http://www.signio.co.za>
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/address.png]
Centurion Square, 3rd Floor, cnr Heuwel and Gordon Hood rd, Centurion
This communication is subject to Lightstone's email disclaimer<http://www.lightstone.co.za/portal/content/email-disclaimer.aspx>
This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly prohibited and may be unlawful. If you have received this communication in error, please immediately notify the sender by reply e-mail and destroy all copies of the communication and any attachments.
Take a look at the client data. The very last few lines should like this:
[clock]
epoch: 1557407707.455481
local: 2019-05-09 09:15:07 EDT
UTC: 2019-05-09 13:15:07 UTCIf not, then the report is being chopped off because it's too big. There are a couple of setting in the xymonserver.cfg file:
MAXMSG_STATUS The maximum size of a "status" message in kB, default: 256. Status messages are the ones that end up as columns on the web display. The default size should be adequate in most cases, but some extension scripts can generate very large status messages - close to 1024 kB. You should only change this if you see messages in the xymond log file about status messages being truncated.
MAXMSG_CLIENT The maximum size of a "client" message in kB, default: 512. "client" messages are generated by the Xymon client, and often include large process-listings. You should only change this if you see messages in the xymond log file about client messages being truncated.
Ralph Mitchell
On Thu, May 9, 2019 at 9:02 AM Chris Pretorius <chrisp at lightstoneauto.co.za> wrote:
Good day
On one of my very busy severs (Centos7, tomcat8.5) the proc test fails
I noticed that on the SERVICES=procs page for the server only about 4 line are shown from the ps output.
The problem only happens when the server is busy.
I added more ram to the server but the result is the same.
Memory usage on server is ok (Reported by xymon):
UsedTotal Percentage
Real/Physical 18464M 24070M 70%
Actual 9041M 7999M 37%
Swap/Page 39M 7999M 0%
The xymon client was installed from the Terabithia repo
xymon-client-4.3.28-1.el7.x86_64
What do I need to change in my configs to remedy the problem please.
Kind regards
[image: https://lsc-assets.scdn1.secure.raxcdn.com/lssig/AUTOlogoW.png]
*Chris Pretorius*
[image: https://lsc-assets.scdn1.secure.raxcdn.com/lssig/phone.png]
0872367740
[image: https://lsc-assets.scdn1.secure.raxcdn.com/lssig/email.png]
chrisp at lightstone.co.za
[image: https://lsc-assets.scdn1.secure.raxcdn.com/lssig/web.png]
www.signio.co.za
[image: https://lsc-assets.scdn1.secure.raxcdn.com/lssig/address.png]
Centurion Square, 3rd Floor, cnr Heuwel and Gordon Hood rd, Centurion
This communication is subject to Lightstone's email disclaimer <http://www.lightstone.co.za/portal/content/email-disclaimer.aspx>
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Thanx Mitchell
I made the changes and proc test now looking better.
I appreciate your help
Kind regards
From: Ralph Mitchell <ralphmitchell at gmail.com> Sent: Thursday, May 9, 2019 3:24 PM To: Chris Pretorius <chrisp at lightstoneauto.co.za> Cc: xymon at xymon.com Subject: Re: [Xymon] proc test fails
Take a look at the client data. The very last few lines should like this:
[clock]
epoch: 1557407707.455481
local: 2019-05-09 09:15:07 EDT
UTC: 2019-05-09 13:15:07 UTCIf not, then the report is being chopped off because it's too big. There are a couple of setting in the xymonserver.cfg file:
MAXMSG_STATUS The maximum size of a "status" message in kB, default: 256. Status messages are the ones that end up as columns on the web display. The default size should be adequate in most cases, but some extension scripts can generate very large status messages - close to 1024 kB. You should only change this if you see messages in the xymond log file about status messages being truncated. MAXMSG_CLIENT The maximum size of a "client" message in kB, default: 512. "client" messages are generated by the Xymon client, and often include large process-listings. You should only change this if you see messages in the xymond log file about client messages being truncated.
Ralph Mitchell
On Thu, May 9, 2019 at 9:02 AM Chris Pretorius <chrisp at lightstoneauto.co.za<mailto:chrisp at lightstoneauto.co.za>> wrote: Good day
On one of my very busy severs (Centos7, tomcat8.5) the proc test fails
I noticed that on the SERVICES=procs page for the server only about 4 line are shown from the ps output. The problem only happens when the server is busy. I added more ram to the server but the result is the same. Memory usage on server is ok (Reported by xymon): Used Total Percentage Real/Physical 18464M 24070M 70% Actual 9041M 7999M 37% Swap/Page 39M 7999M 0%
The xymon client was installed from the Terabithia repo xymon-client-4.3.28-1.el7.x86_64
What do I need to change in my configs to remedy the problem please.
Kind regards
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/AUTOlogoW.png]
Chris Pretorius
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/phone.png]
0872367740
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/email.png]
chrisp at lightstone.co.za<mailto:chrisp at lightstone.co.za>
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/web.png]
www.signio.co.za<http://www.signio.co.za>
[https://lsc-assets.scdn1.secure.raxcdn.com/lssig/address.png]
Centurion Square, 3rd Floor, cnr Heuwel and Gordon Hood rd, Centurion
This communication is subject to Lightstone's email disclaimer<http://www.lightstone.co.za/portal/content/email-disclaimer.aspx>
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
participants (3)
-
chrisp＠lightstoneauto.co.za
-
Paul.Root＠CenturyLink.com
-
ralphmitchell＠gmail.com