I am very new to Xymon so bear with me.
I am looking into a problem on Xymon 4.2.2. on linux with no luck.
Looking for some hints on how to proceed.
Graphs show up only in trends column but not in its own column.
This is not a custom graph that I am trying to create but the standard setup by
Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other
Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk
disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with
no graphs to go with it.
Any help appreciated,
Usha Donthi
So you're saying no host in the conn column has a graph?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <udonthi at cisco.com> wrote:
I am very new to Xymon so bear with me.
I am looking into a problem on Xymon 4.2.2. on linux with no luck.
Looking for some hints on how to proceed.
Graphs show up only in trends column but not in its own column.
This is not a custom graph that I am trying to create but the standard setup by
Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other
Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk
disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with
no graphs to go with it.
Any help appreciated,
Usha Donthi
That is correct.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 2:51 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
So you're saying no host in the conn column has a graph?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <udonthi at cisco.com> wrote:
I am very new to Xymon so bear with me.
I am looking into a problem on Xymon 4.2.2. on linux with no luck.
Looking for some hints on how to proceed.
Graphs show up only in trends column but not in its own column.
This is not a custom graph that I am trying to create but the standard setup by
Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other
Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk
disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with
no graphs to go with it.
Any help appreciated,
Usha Donthi
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Do the graphs show up correctly in trends?
On the conn page does the source show HTML to include the graph (the img src= element that is)?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <udonthi at cisco.com> wrote:
That is correct.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 2:51 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
So you're saying no host in the conn column has a graph?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <udonthi at cisco.com> wrote:
I am very new to Xymon so bear with me.
I am looking into a problem on Xymon 4.2.2. on linux with no luck.
Looking for some hints on how to proceed.
Graphs show up only in trends column but not in its own column.
This is not a custom graph that I am trying to create but the standard setup by
Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other
Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk
disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with
no graphs to go with it.
Any help appreciated,
Usha Donthi
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tc...
I see tcp.conn.rrd file in data/rrd directory
rrdtool dump tcp.conn.rrd shows last update
<?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd"> <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1270073706 </lastupdate> <!-- 2010-03-31 15:15:06 PDT -->
<ds>
<name> sec </name>
<type> GAUGE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> 0.022000 </last_ds>
<value> 1.3200000000e-01 </value>
<unknown_sec> 0 </unknown_sec>
</ds>... ...
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 3:13 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Do the graphs show up correctly in trends?
On the conn page does the source show HTML to include the graph (the img src= element that is)?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <udonthi at cisco.com> wrote:
That is correct.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 2:51 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
So you're saying no host in the conn column has a graph?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <udonthi at cisco.com> wrote:
I am very new to Xymon so bear with me.
I am looking into a problem on Xymon 4.2.2. on linux with no luck.
Looking for some hints on how to proceed.
Graphs show up only in trends column but not in its own column.
This is not a custom graph that I am trying to create but the standard setup by
Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other
Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk
disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with
no graphs to go with it.
Any help appreciated,
Usha Donthi
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
That host won't work for anyone not using your DNS server so we can't look.
So the data is there and it appears as though it is updating, is the image making it to the HTML page?
I've not seen this issue as long as install correctly.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 6:20 PM, Usha Donthi <udonthi at cisco.com> wrote:
http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tc...
I see tcp.conn.rrd file in data/rrd directory
> rrdtool dump tcp.conn.rrd shows last update
<?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd"> <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1270073706 </lastupdate> <!-- 2010-03-31 15:15:06 PDT -->
<ds> <name> sec </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max>
<!-- PDP Status --> <last_ds> 0.022000 </last_ds> <value> 1.3200000000e-01 </value> <unknown_sec> 0 </unknown_sec> </ds>
... ...
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 3:13 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Do the graphs show up correctly in trends?
On the conn page does the source show HTML to include the graph (the img src= element that is)?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <udonthi at cisco.com> wrote:
That is correct.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 2:51 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
So you're saying no host in the conn column has a graph?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <udonthi at cisco.com> wrote:
I am very new to Xymon so bear with me.
I am looking into a problem on Xymon 4.2.2. on linux with no luck.
Looking for some hints on how to proceed.
Graphs show up only in trends column but not in its own column.
This is not a custom graph that I am trying to create but the standard setup by
Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other
Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk
disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with
no graphs to go with it.
Any help appreciated,
Usha Donthi
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
source html page -
<table summary="tcp:conn Graph"><tr><td><A HREF="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&action=menu"><IMG BORDER=0 SRC="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=view" ALT="hobbit graph tcp:conn"></A></td><td> <td align="left" valign="top"> <a href="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=selzoom"> <img src="/xymon/gifs/zoom.gif" border=0 alt="Zoom graph" style='padding: 3px'> </a> </td></tr></table>
-----Original Message----- From: Usha Donthi [mailto:udonthi at cisco.com] Sent: Wednesday, March 31, 2010 3:21 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Help: No graphs in xymon
http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tc...
I see tcp.conn.rrd file in data/rrd directory
rrdtool dump tcp.conn.rrd shows last update
<?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd"> <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1270073706 </lastupdate> <!-- 2010-03-31 15:15:06 PDT -->
<ds>
<name> sec </name>
<type> GAUGE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> 0.0000000000e+00 </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> 0.022000 </last_ds>
<value> 1.3200000000e-01 </value>
<unknown_sec> 0 </unknown_sec>
</ds>... ...
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 3:13 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Do the graphs show up correctly in trends?
On the conn page does the source show HTML to include the graph (the img src= element that is)?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <udonthi at cisco.com> wrote:
That is correct.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 2:51 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
So you're saying no host in the conn column has a graph?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <udonthi at cisco.com> wrote:
I am very new to Xymon so bear with me.
I am looking into a problem on Xymon 4.2.2. on linux with no luck.
Looking for some hints on how to proceed.
Graphs show up only in trends column but not in its own column.
This is not a custom graph that I am trying to create but the standard setup by
Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other
Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk
disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with
no graphs to go with it.
Any help appreciated,
Usha Donthi
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Does
work?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 6:35 PM, Usha Donthi <udonthi at cisco.com> wrote:
source html page -
<table summary="tcp:conn Graph"><tr><td><A HREF="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&action=menu"><IMG BORDER=0 SRC="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=view" ALT="hobbit graph tcp:conn"></A></td><td> <td align="left" valign="top"> <a href="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=selzoom"> <img src="/xymon/gifs/zoom.gif" border=0 alt="Zoom graph" style='padding: 3px'> </a> </td></tr></table>
-----Original Message----- From: Usha Donthi [mailto:udonthi at cisco.com] Sent: Wednesday, March 31, 2010 3:21 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Help: No graphs in xymon
http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tc...
I see tcp.conn.rrd file in data/rrd directory
> rrdtool dump tcp.conn.rrd shows last update
<?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd"> <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1270073706 </lastupdate> <!-- 2010-03-31 15:15:06 PDT -->
<ds> <name> sec </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max>
<!-- PDP Status --> <last_ds> 0.022000 </last_ds> <value> 1.3200000000e-01 </value> <unknown_sec> 0 </unknown_sec> </ds>
... ...
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 3:13 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Do the graphs show up correctly in trends?
On the conn page does the source show HTML to include the graph (the img src= element that is)?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <udonthi at cisco.com> wrote:
That is correct.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Wednesday, March 31, 2010 2:51 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
So you're saying no host in the conn column has a graph?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <udonthi at cisco.com> wrote:
I am very new to Xymon so bear with me.
I am looking into a problem on Xymon 4.2.2. on linux with no luck.
Looking for some hints on how to proceed.
Graphs show up only in trends column but not in its own column.
This is not a custom graph that I am trying to create but the standard setup by
Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other
Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk
disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with
no graphs to go with it.
Any help appreciated,
Usha Donthi
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=view
This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page.
If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://' If the file is downloaded, you can do 'cat <file>' to see the content.
The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it.
Stef
When I ran the wget command it errors with nostale: command not found Any idea what it means?
--14:46:35--
http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1
=> hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) - hobbitgraph.sh?host=adbu-relbld-1' saved [107/107]
[1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale
And the cat on file downloaded say's -
<html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html>
-----Original Message----- From: Stef Coene [mailto:stef.coene at docum.org] Sent: Thursday, April 01, 2010 12:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view
This should be all on 1 line. This is the part after SRC= and it is the url
for the image so you can copy it from the source of the html page.
If this is not showing anything in the browser, you can use the command wget
on your xymon server to download the image on the command line. 'wget http://' If the file is downloaded, you can do 'cat <file>' to see the content.
The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it.
Stef
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Put quotes around the URL.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
When I ran the wget command it errors with nostale: command not found Any idea what it means?
--14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 =>
hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) -hobbitgraph.sh?host=adbu-relbld-1' saved [107/107][1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale
And the cat on file downloaded say's -
<html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html>
-----Original Message----- From: Stef Coene [mailto:stef.coene at docum.org] Sent: Thursday, April 01, 2010 12:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view
This should be all on 1 line. This is the part after SRC= and it is the url
for the image so you can copy it from the source of the html page.
If this is not showing anything in the browser, you can use the command wget
on your xymon server to download the image on the command line. 'wget http://' If the file is downloaded, you can do 'cat <file>' to see the content.
The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it.
Stef
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
I see a permission denied now -
Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied
Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied).
BTW, if I remove the &nostale on the web browser I can see the graph
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:08 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Put quotes around the URL.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
When I ran the wget command it errors with nostale: command not found Any idea what it means?
--14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 =>
hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) -hobbitgraph.sh?host=adbu-relbld-1' saved [107/107][1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale
And the cat on file downloaded say's -
<html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html>
-----Original Message----- From: Stef Coene [mailto:stef.coene at docum.org] Sent: Thursday, April 01, 2010 12:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view
This should be all on 1 line. This is the part after SRC= and it is the url
for the image so you can copy it from the source of the html page.
If this is not showing anything in the browser, you can use the command wget
on your xymon server to download the image on the command line. 'wget http://' If the file is downloaded, you can do 'cat <file>' to see the content.
The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it.
Stef
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
My guess is an Apache config problem.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
I see a permission denied now -
Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied
Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied).
BTW, if I remove the &nostale on the web browser I can see the graph
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:08 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Put quotes around the URL.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
When I ran the wget command it errors with nostale: command not found Any idea what it means?
--14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 =>
hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) -hobbitgraph.sh?host=adbu-relbld-1' saved [107/107][1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale
And the cat on file downloaded say's -
<html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html>
-----Original Message----- From: Stef Coene [mailto:stef.coene at docum.org] Sent: Thursday, April 01, 2010 12:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view
This should be all on 1 line. This is the part after SRC= and it is the url
for the image so you can copy it from the source of the html page.
If this is not showing anything in the browser, you can use the command wget
on your xymon server to download the image on the command line. 'wget http://' If the file is downloaded, you can do 'cat <file>' to see the content.
The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it.
Stef
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
Thanks I will take a look in Apache config area.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:27 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
My guess is an Apache config problem.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
I see a permission denied now -
Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied
Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied).
BTW, if I remove the &nostale on the web browser I can see the graph
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:08 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Put quotes around the URL.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
When I ran the wget command it errors with nostale: command not found Any idea what it means?
--14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 =>
hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) -hobbitgraph.sh?host=adbu-relbld-1' saved [107/107][1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale
And the cat on file downloaded say's -
<html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html>
-----Original Message----- From: Stef Coene [mailto:stef.coene at docum.org] Sent: Thursday, April 01, 2010 12:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view
This should be all on 1 line. This is the part after SRC= and it is the url
for the image so you can copy it from the source of the html page.
If this is not showing anything in the browser, you can use the command wget
on your xymon server to download the image on the command line. 'wget http://' If the file is downloaded, you can do 'cat <file>' to see the content.
The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it.
Stef
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Apache configuration looks okay.
Does anyone know where is the process trying to write to?
Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied).
-Usha
-----Original Message----- From: Usha Donthi [mailto:udonthi at cisco.com] Sent: Friday, April 02, 2010 3:47 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Help: No graphs in xymon
Thanks I will take a look in Apache config area.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:27 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
My guess is an Apache config problem.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
I see a permission denied now -
Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied
Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied).
BTW, if I remove the &nostale on the web browser I can see the graph
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:08 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Put quotes around the URL.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
When I ran the wget command it errors with nostale: command not found Any idea what it means?
--14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 =>
hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) -hobbitgraph.sh?host=adbu-relbld-1' saved [107/107][1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale
And the cat on file downloaded say's -
<html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html>
-----Original Message----- From: Stef Coene [mailto:stef.coene at docum.org] Sent: Thursday, April 01, 2010 12:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view
This should be all on 1 line. This is the part after SRC= and it is the url
for the image so you can copy it from the source of the html page.
If this is not showing anything in the browser, you can use the command wget
on your xymon server to download the image on the command line. 'wget http://' If the file is downloaded, you can do 'cat <file>' to see the content.
The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it.
Stef
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
On Saturday 03 April 2010, Usha Donthi wrote:
Apache configuration looks okay.
Does anyone know where is the process trying to write to?
Yes, in the directory where you are standing in. Go to /tmp with "cd /tmp" or to your home directory with "cd ~" and try again.
Stef
I still have the problem. One thing I observe is - if I remove the &nostale& from http://.... path , the graph is displayed Is there something I Need to do during Xymon setup or change in hobbitgraph.cfg file?
-----Original Message----- From: Usha Donthi [mailto:udonthi at cisco.com] Sent: Friday, April 02, 2010 3:47 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Help: No graphs in xymon
Thanks I will take a look in Apache config area.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:27 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
My guess is an Apache config problem.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
I see a permission denied now -
Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied
Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied).
BTW, if I remove the &nostale on the web browser I can see the graph
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:08 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Put quotes around the URL.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
When I ran the wget command it errors with nostale: command not found Any idea what it means?
--14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 =>
hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) -hobbitgraph.sh?host=adbu-relbld-1' saved [107/107][1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale
And the cat on file downloaded say's -
<html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html>
-----Original Message----- From: Stef Coene [mailto:stef.coene at docum.org] Sent: Thursday, April 01, 2010 12:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view
This should be all on 1 line. This is the part after SRC= and it is the url
for the image so you can copy it from the source of the html page.
If this is not showing anything in the browser, you can use the command wget
on your xymon server to download the image on the command line. 'wget http://' If the file is downloaded, you can do 'cat <file>' to see the content.
The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it.
Stef
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Hi Usha,
Have you found a solution on this problem? Co'z I'm having the same issue. Here's my Xymon server info: Xymon 4.3.0 beta 2 CentOS release 5.4 (Final) rrdtool-1.4.4-1
Thanks and regards, Ryan
-----Original Message----- From: Usha Donthi [mailto:udonthi at cisco.com] Sent: Tuesday, April 06, 2010 2:25 AM To: hobbit at hswn.dk Subject: RE: [hobbit] Help: No graphs in xymon
I still have the problem. One thing I observe is - if I remove the &nostale& from http://.... path , the graph is displayed Is there something I Need to do during Xymon setup or change in hobbitgraph.cfg file?
-----Original Message----- From: Usha Donthi [mailto:udonthi at cisco.com] Sent: Friday, April 02, 2010 3:47 PM To: hobbit at hswn.dk Subject: RE: [hobbit] Help: No graphs in xymon
Thanks I will take a look in Apache config area.
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:27 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
My guess is an Apache config problem.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
I see a permission denied now -
Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied
Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied).
BTW, if I remove the &nostale on the web browser I can see the graph
-----Original Message----- From: Josh Luthman [mailto:josh at imaginenetworksllc.com] Sent: Friday, April 02, 2010 3:08 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
Put quotes around the URL.
On 4/2/10, Usha Donthi <udonthi at cisco.com> wrote:
When I ran the wget command it errors with nostale: command not found Any idea what it means?
--14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 =>
hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) -hobbitgraph.sh?host=adbu-relbld-1' saved [107/107][1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale
And the cat on file downloaded say's -
<html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html>
-----Original Message----- From: Stef Coene [mailto:stef.coene at docum.org] Sent: Thursday, April 01, 2010 12:16 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Help: No graphs in xymon
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_w idth=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&col or=gree n&graph=hourly&action=view
This should be all on 1 line. This is the part after SRC= and it is the url
for the image so you can copy it from the source of the html page.
If this is not showing anything in the browser, you can use the command wget
on your xymon server to download the image on the command line. 'wget http://' If the file is downloaded, you can do 'cat <file>' to see the content.
The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it.
Stef
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Hello there.
I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all.
Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?
There is a mysql script on there that works for me. It must be installed on the client as it reports status.
On 4/3/10, Benjie Muganzi <mgzbenjie at gmail.com> wrote:
Hello there.
I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all.
Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?
-- Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Please do not thread hijack -- this is basic mailing list etiquette. I ignore hijacked threads, in terms of helping the hijacker anyhow.
Benjie Muganzi wrote:
Hello there.
I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all.
Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?
---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer II |$&| |__| | | |__/ | \| _| |novosirj at umdnj.edu - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST - NJMS Medical Science Bldg - C630 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAku3a2UACgkQmb+gadEcsb4saACfahOyEUsvSiSruPEPwHBWHLbA p2QAn0h/Kup+UG1dE5uKhIEFhkk9BXMB =hqPI -----END PGP SIGNATURE-----
Not a big fan of the double post either...
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
“Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
On Sat, Apr 3, 2010 at 12:23 PM, Ryan Novosielski <novosirj at umdnj.edu>wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
Please do not thread hijack -- this is basic mailing list etiquette. I ignore hijacked threads, in terms of helping the hijacker anyhow.
Benjie Muganzi wrote:
Hello there.
I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all.
Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?
---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer II |$&| |__| | | |__/ | \| _| |novosirj at umdnj.edu - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST - NJMS Medical Science Bldg - C630 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAku3a2UACgkQmb+gadEcsb4saACfahOyEUsvSiSruPEPwHBWHLbA p2QAn0h/Kup+UG1dE5uKhIEFhkk9BXMB =hqPI -----END PGP SIGNATURE-----
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1
He probably got dinged for thread hijacking and went back and did it correctly, which I guess is forgivable.
Josh Luthman wrote:
Not a big fan of the double post either...
On Sat, Apr 3, 2010 at 12:23 PM, Ryan Novosielski <novosirj at umdnj.edu <mailto:novosirj at umdnj.edu>> wrote:
Please do not thread hijack -- this is basic mailing list etiquette. I ignore hijacked threads, in terms of helping the hijacker anyhow.
Benjie Muganzi wrote:
Hello there.
I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all.
Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk <mailto:hobbit-unsubscribe at hswn.dk>
---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer II |$&| |__| | | |__/ | \| _| |novosirj at umdnj.edu - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST - NJMS Medical Science Bldg - C630 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAku3bVMACgkQmb+gadEcsb4mSgCgwQTgZosxvFMryILOZP81DwFy aQ4An2TB704w2veMBOgZa2c8g3mNTrXg =4BbQ -----END PGP SIGNATURE-----
participants (6)
-
josh＠imaginenetworksllc.com
-
mgzbenjie＠gmail.com
-
novosirj＠umdnj.edu
-
ryanjay.lapuz＠tsdp.toshiba.co.jp
-
stef.coene＠docum.org
-
udonthi＠cisco.com