[hobbit] Changing default graph resolution
Hmmm That's pretty much what I tried earlier (with a few lines in different order), and it didn't work. I get the first (less populated) graph, but not the second. :-( Should this work with a bb client, or is it essential that I use a hobbit client?
Cheers Vernon
-----Original Message----- From: Henrik Stoerner [mailto:henrik at hswn.dk] Sent: Tuesday, 24 May 2005 2:00 PM To: hobbit at hswn.dk Subject: Re: [hobbit] Changing default graph resolution
On Tue, May 24, 2005 at 11:35:22AM +0800, Vernon Everett wrote:
In hobbitgraph.cfg, I have the following definition, and it produces wonderful, but somewhat cluttered graphs. ---snip--- [ora9-sga] FNPATTERN tablespace.rrd TITLE TableSpace Utilization YAXIS % Full DEF:xdb at RRDIDX@=@RRDFN@:siebprd_XDB:AVERAGE DEF:whsidx at RRDIDX@=@RRDFN@:siebprd_WHS_INDEX:AVERAGE DEF:whsdata at RRDIDX@=@RRDFN@:siebprd_WHS_DATA:AVERAGE DEF:users at RRDIDX@=@RRDFN@:siebprd_USERS:AVERAGE DEF:undotbs1 at RRDIDX@=@RRDFN@:siebprd_UNDOTBS1:AVERAGE DEF:tools at RRDIDX@=@RRDFN@:siebprd_TOOLS:AVERAGE DEF:system at RRDIDX@=@RRDFN@:siebprd_SYSTEM:AVERAGE DEF:siebind at RRDIDX@=@RRDFN@:siebprd_SIEB_INDEX:AVERAGE DEF:siebdata at RRDIDX@=@RRDFN@:siebprd_SIEB_DATA:AVERAGE DEF:loader at RRDIDX@=@RRDFN@:siebprd_LOADER_DATA:AVERAGE LINE2:xdb at RRDIDX@#@COLOR@:XDB LINE2:whsidx at RRDIDX@#@COLOR@:WHS_INDEX LINE2:whsdata at RRDIDX@#@COLOR@:WHS_DATA LINE2:users at RRDIDX@#@COLOR@:USERS LINE2:undotbs1 at RRDIDX@#@COLOR@:UNDO LINE2:tools at RRDIDX@#@COLOR@:TOOLS LINE2:system at RRDIDX@#@COLOR@:SYSTEM LINE2:siebind at RRDIDX@#@COLOR@:SIEB_INDEX LINE2:siebdata at RRDIDX@#@COLOR@:SIEB_DATA LINE2:loader at RRDIDX@#@COLOR@:LOADER -u 100 -l 0 ---snip---
Minor nit: Since you only have one input file, the "@RRDIDX@" in all of the DEF and LINE definitions is ignored.
How do I get it to split this across 2 or even 3 graphs, like the disk utilisation graphs.
You'll need to split them into multiple graph definitions. E.g. define two graphs:
[ora9-sga] FNPATTERN tablespace.rrd TITLE TableSpace Utilization YAXIS % Full DEF:xdb=@RRDFN@:siebprd_XDB:AVERAGE DEF:whsidx=@RRDFN@:siebprd_WHS_INDEX:AVERAGE DEF:whsdata=@RRDFN@:siebprd_WHS_DATA:AVERAGE DEF:users=@RRDFN@:siebprd_USERS:AVERAGE DEF:undotbs1=@RRDFN@:siebprd_UNDOTBS1:AVERAGE LINE2:xdb#@COLOR@:XDB LINE2:whsidx#@COLOR@:WHS_INDEX LINE2:whsdata#@COLOR@:WHS_DATA LINE2:users#@COLOR@:USERS LINE2:undotbs1#@COLOR@:UNDO -u 100 -l 0
[ora9-sga1] FNPATTERN tablespace.rrd TITLE TableSpace Utilization YAXIS % Full DEF:tools=@RRDFN@:siebprd_TOOLS:AVERAGE DEF:system=@RRDFN@:siebprd_SYSTEM:AVERAGE DEF:siebind=@RRDFN@:siebprd_SIEB_INDEX:AVERAGE DEF:siebdata=@RRDFN@:siebprd_SIEB_DATA:AVERAGE DEF:loader=@RRDFN@:siebprd_LOADER_DATA:AVERAGE LINE2:tools#@COLOR@:TOOLS LINE2:system#@COLOR@:SYSTEM LINE2:siebind#@COLOR@:SIEB_INDEX LINE2:siebdata#@COLOR@:SIEB_DATA LINE2:loader#@COLOR@:LOADER -u 100 -l 0
Then to have them both displayed on the "ora9-sga" column, add a LARRD tag to the host, like this:
1.2.3.4 db1.foo.com # LARRD:*,ora9-sga:ora9-sga|ora9-sga1
Henrik
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
NOTICE: This message and any attachments are confidential and may contain copyright material of Australian Finance Group Limited or a third party. It is intended solely for the purpose of the addressee and any other named recipient. If you are not the intended recipient, any use, distribution, disclosure or copying of this message is strictly prohibited. The confidentiality attached to this message is not waived or lost by reason of the mistaken transmission or delivery to any unintended party. If you have received this message in error, please notify the author immediately or contact Australian Finance Group on +61 8 9420 7888.
On Tue, May 24, 2005 at 02:20:21PM +0800, Vernon Everett wrote:
That's pretty much what I tried earlier (with a few lines in different order), and it didn't work. I get the first (less populated) graph, but not the second. :-(
Are you looking at the "ora9-sga" status page, or the "trends" status page ?
I admit - they should be identical, but for various reasons the LARRD:... setting is only used on the "trends" page.
Should this work with a bb client, or is it essential that I use a hobbit client?
This is purely a server-side thing, so as long as you run Hobbit on the server side, it should work.
Henrik
Hi,
I was also interested in splitting up some of the graphing data into multiple graphs under the various columns. If LARRD setting only applies to the trends column then is there a method to get multiple graphs on the other columns?
Thanks
Thomas Miller
-----Original Message----- From: Henrik Stoerner [mailto:henrik at hswn.dk] Sent: Tuesday, May 24, 2005 4:08 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Changing default graph resolution
On Tue, May 24, 2005 at 02:20:21PM +0800, Vernon Everett wrote:
That's pretty much what I tried earlier (with a few lines in different order), and it didn't work. I get the first (less populated) graph, but not the second. :-(
Are you looking at the "ora9-sga" status page, or the "trends" status page ?
I admit - they should be identical, but for various reasons the LARRD:... setting is only used on the "trends" page.
Should this work with a bb client, or is it essential that I use a hobbit client?
This is purely a server-side thing, so as long as you run Hobbit on the server side, it should work.
Henrik
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
participants (3)
-
henrik@hswn.dk
-
tfm@Basit.COM
-
v.everett@afgonline.com.au