Generate page with specific graphs for all hosts?
I hacked up something like this for the network traffic graphs -- adjusting to any other graph should be easy. No bells and whistles, just a static filter for the hosts of interest .
IIRC I used 'xymonpage.cgi' to wrap up generated links to 'showgraph.cgi'.
I'll check if I can bring it in shape for sharing if desired.
Thomas
Michael Burger <Mike.Burger at FreedomMortgage.com> schrieb:
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
That would be awesome.
--
Mike Burger
AIX Administrator
<http://freedomhome.fhmc.local/intranet/main.jsp>
Phone (317) 537-3680, Fax (317) 537-4680, Cell (317) 797-2040
E-mail: Mike.Burger at FreedomMortgage.com <mailto:Anthony.House at freedommortgage.com>
"Once word leaks out that a pirate's gone soft, people begin to disobey you and then it's nothing but work, work, work, all the time." --Westley/The Dread Pirate Roberts
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Thomas Eckert Sent: Tuesday, December 18, 2012 4:41 PM To: xymon at xymon.com Subject: Re: [Xymon] Generate page with specific graphs for all hosts?
I hacked up something like this for the network traffic graphs -- adjusting to any other graph should be easy. No bells and whistles, just a static filter for the hosts of interest .
IIRC I used 'xymonpage.cgi' to wrap up generated links to 'showgraph.cgi'.
I'll check if I can bring it in shape for sharing if desired.
Thomas
Michael Burger <Mike.Burger at FreedomMortgage.com> schrieb:
Nothing, eh? Phooey.
--
Mike Burger
AIX Administrator
cid:image001.gif at 01CC72C8.834C1990 <http://freedomhome.fhmc.local/intranet/main.jsp>
Phone (317) 537-3680, Fax (317) 537-4680, Cell (317) 797-2040
E-mail: Mike.Burger at FreedomMortgage.com <mailto:Anthony.House at freedommortgage.com>
"Once word leaks out that a pirate's gone soft, people begin to disobey you and then it's nothing but work, work, work, all the time." --Westley/The Dread Pirate Roberts
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Mike Burger Sent: Monday, December 10, 2012 12:05 PM To: xymon at xymon.com Subject: [Xymon] Generate page with specific graphs for all hosts?
I would like to have a page generated that shows the current (48 hours) view for the “vmstat” graphs for either a batch/group of servers or all servers.
Basically, like the trends page for a particular server, but rather than have all of the disks, memory, io etc, just the current vmstat/cpu utilization view, with the same drill down options as are presented on the trends page.
Is there a simple way to do this using xymongen/xymonweb?
Thanks.
--
Mike Burger
AIX Administrator
cid:image001.gif at 01CC72C8.834C1990 <http://freedomhome.fhmc.local/intranet/main.jsp>
Phone (317) 537-3680, Fax (317) 537-4680, Cell (317) 797-2040
E-mail: Mike.Burger at FreedomMortgage.com <mailto:Anthony.House at freedommortgage.com>
"Once word leaks out that a pirate's gone soft, people begin to disobey you and then it's nothing but work, work, work, all the time." --Westley/The Dread Pirate Roberts
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure, alteration or distribution is strictly prohibited and may violate state or federal law. If you are not the intended recipient, please contact the sender by reply e-mail, delete this email and destroy all copies of the message.
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure, alteration or distribution is strictly prohibited and may violate state or federal law. If you are not the intended recipient, please contact the sender by reply e-mail, delete this email and destroy all copies of the message.
Hi Mike,
finally I had a look at that (very hacky) script. I cleaned it up a bit but it's still very ugly w/ a mix of hardcoded paths, manual sourcing of xymonserver.cfg, ...
Anyway: the basic idea is to construct URLs like the following
http://xymon.com/xymon-cgi/showgraph.sh?host=blixen.hswn.dk&service=tcp:conn...
And wrap 'em with xymonpage to construct a complete (xymon) page.
As a starting point the attached "multigraph-public.sh" might help.
Thomas
On 12/18/2012 10:43 PM, Michael Burger wrote:
That would be awesome.
--
*Mike Burger*
*AIX Administrator*
*cid:image001.gif at 01CC72C8.834C1990* <http://freedomhome.fhmc.local/intranet/main.jsp>
*Phone (317) 537-3680**, **Fax****(317) 537-4680, Cell (317) 797-2040 ***
*E-mail: **Mike.Burger at FreedomMortgage.com* <mailto:Anthony.House at freedommortgage.com>
"Once word leaks out that a pirate's gone soft, people begin to disobey you and then it's nothing but work, work, work, all the time." --Westley/The Dread Pirate Roberts
*From:*xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] *On Behalf Of *Thomas Eckert *Sent:* Tuesday, December 18, 2012 4:41 PM *To:* xymon at xymon.com *Subject:* Re: [Xymon] Generate page with specific graphs for all hosts?
I hacked up something like this for the network traffic graphs -- adjusting to any other graph should be easy. No bells and whistles, just a static filter for the hosts of interest .
IIRC I used 'xymonpage.cgi' to wrap up generated links to 'showgraph.cgi'.
I'll check if I can bring it in shape for sharing if desired.
Thomas
Michael Burger <Mike.Burger at FreedomMortgage.com <mailto:Mike.Burger at FreedomMortgage.com>> schrieb:
Nothing, eh? Phooey.
--
*Mike Burger*
*AIX Administrator*
*cid:image001.gif at 01CC72C8.834C1990* <http://freedomhome.fhmc.local/intranet/main.jsp>
*Phone (317) 537-3680, **Fax**(317) 537-4680, Cell (317) 797-2040 *
*E-mail: **Mike.Burger at FreedomMortgage.com* <mailto:Anthony.House at freedommortgage.com>
"Once word leaks out that a pirate's gone soft, people begin to disobey you and then it's nothing but work, work, work, all the time." --Westley/The Dread Pirate Roberts
*From:*xymon-bounces at xymon.com <mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] *On Behalf Of *Mike Burger *Sent:* Monday, December 10, 2012 12:05 PM *To:* xymon at xymon.com <mailto:xymon at xymon.com> *Subject:* [Xymon] Generate page with specific graphs for all hosts?
I would like to have a page generated that shows the current (48 hours) view for the “vmstat” graphs for either a batch/group of servers or all servers.
Basically, like the trends page for a particular server, but rather than have all of the disks, memory, io etc, just the current vmstat/cpu utilization view, with the same drill down options as are presented on the trends page.
Is there a simple way to do this using xymongen/xymonweb?
Thanks.
--
*Mike Burger*
*AIX Administrator*
*cid:image001.gif at 01CC72C8.834C1990* <http://freedomhome.fhmc.local/intranet/main.jsp>
*Phone (317) 537-3680, **Fax**(317) 537-4680, Cell (317) 797-2040 *
*E-mail: **Mike.Burger at FreedomMortgage.com* <mailto:Anthony.House at freedommortgage.com>
"Once word leaks out that a pirate's gone soft, people begin to disobey you and then it's nothing but work, work, work, all the time." --Westley/The Dread Pirate Roberts
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for
the sole use of the intended recipient(s) and may contain confidential
information. Any unauthorized review, use, disclosure, alteration or
distribution is strictly prohibited and may violate state or federal law. If you
are not the intended recipient, please contact the sender by reply e-mail,
delete this email and destroy all copies of the message.
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure, alteration or distribution is strictly prohibited and may violate state or federal law. If you are not the intended recipient, please contact the sender by reply e-mail, delete this email and destroy all copies of the message.
--
| IT-Beratung Eckert | Hartkirchweg 54 | fon: +49 (0)761/ 594 9898 | Thomas Eckert | 79111 Freiburg i.Br. | fax: +49 (0)761/ 594 9899 | | Germany | http://www.it-eckert.de/
I'll give this a look-see and see how I can adapt it.
Thank you.
Mike Burger http://www.bubbanfriends.org
"It's always suicide-mission this, save-the-planet that. No one ever just stops by to say 'hi' anymore." --Colonel Jack O'Neill, SG1
Hi Mike,
finally I had a look at that (very hacky) script. I cleaned it up a bit but it's still very ugly w/ a mix of hardcoded paths, manual sourcing of xymonserver.cfg, ...
Anyway: the basic idea is to construct URLs like the following
http://xymon.com/xymon-cgi/showgraph.sh?host=blixen.hswn.dk&service=tcp:conn...
And wrap 'em with
xymonpageto construct a complete (xymon) page.As a starting point the attached "multigraph-public.sh" might help.
Thomas
On 12/18/2012 10:43 PM, Michael Burger wrote:
That would be awesome.
--
*Mike Burger*
*AIX Administrator*
*cid:image001.gif at 01CC72C8.834C1990* <http://freedomhome.fhmc.local/intranet/main.jsp>
*Phone (317) 537-3680**, **Fax****(317) 537-4680, Cell (317) 797-2040
*E-mail: **Mike.Burger at FreedomMortgage.com* <mailto:Anthony.House at freedommortgage.com>
"Once word leaks out that a pirate's gone soft, people begin to disobey you and then it's nothing but work, work, work, all the time." --Westley/The Dread Pirate Roberts
*From:*xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] *On Behalf Of *Thomas Eckert *Sent:* Tuesday, December 18, 2012 4:41 PM *To:* xymon at xymon.com *Subject:* Re: [Xymon] Generate page with specific graphs for all hosts?
I hacked up something like this for the network traffic graphs -- adjusting to any other graph should be easy. No bells and whistles, just a static filter for the hosts of interest .
IIRC I used 'xymonpage.cgi' to wrap up generated links to 'showgraph.cgi'.
I'll check if I can bring it in shape for sharing if desired.
Thomas
Michael Burger <Mike.Burger at FreedomMortgage.com <mailto:Mike.Burger at FreedomMortgage.com>> schrieb:
Nothing, eh? Phooey.
--
*Mike Burger*
*AIX Administrator*
*cid:image001.gif at 01CC72C8.834C1990* <http://freedomhome.fhmc.local/intranet/main.jsp>
*Phone (317) 537-3680, **Fax**(317) 537-4680, Cell (317) 797-2040 *
*E-mail: **Mike.Burger at FreedomMortgage.com* <mailto:Anthony.House at freedommortgage.com>
"Once word leaks out that a pirate's gone soft, people begin to disobey you and then it's nothing but work, work, work, all the time." --Westley/The Dread Pirate Roberts
*From:*xymon-bounces at xymon.com <mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] *On Behalf Of *Mike Burger *Sent:* Monday, December 10, 2012 12:05 PM *To:* xymon at xymon.com <mailto:xymon at xymon.com> *Subject:* [Xymon] Generate page with specific graphs for all hosts?
I would like to have a page generated that shows the current (48 hours) view for the âvmstatâ graphs for either a batch/group of servers or all servers.
Basically, like the trends page for a particular server, but rather than have all of the disks, memory, io etc, just the current vmstat/cpu utilization view, with the same drill down options as are presented on the trends page.
Is there a simple way to do this using xymongen/xymonweb?
Thanks.
--
*Mike Burger*
*AIX Administrator*
*cid:image001.gif at 01CC72C8.834C1990* <http://freedomhome.fhmc.local/intranet/main.jsp>
*Phone (317) 537-3680, **Fax**(317) 537-4680, Cell (317) 797-2040 *
*E-mail: **Mike.Burger at FreedomMortgage.com* <mailto:Anthony.House at freedommortgage.com>
"Once word leaks out that a pirate's gone soft, people begin to disobey you and then it's nothing but work, work, work, all the time." --Westley/The Dread Pirate Roberts
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for
the sole use of the intended recipient(s) and may contain confidential
information. Any unauthorized review, use, disclosure, alteration or
distribution is strictly prohibited and may violate state or federal law. If you
are not the intended recipient, please contact the sender by reply e-mail,
delete this email and destroy all copies of the message.
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure, alteration or distribution is strictly prohibited and may violate state or federal law. If you are not the intended recipient, please contact the sender by reply e-mail, delete this email and destroy all copies of the message.
--
| IT-Beratung Eckert | Hartkirchweg 54 | fon: +49 (0)761/ 594 9898 | Thomas Eckert | 79111 Freiburg i.Br. | fax: +49 (0)761/ 594 9899 | | Germany | http://www.it-eckert.de/
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
participants (3)
-
mburger＠bubbanfriends.org
-
Mike.Burger＠FreedomMortgage.com
-
thomas.eckert＠IT-Eckert.de