I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default).
Here is the setting in hobbit-clients.cfg:
HOST=goveritas DISK /remote 95 98
Here is the data on the disk screen for goveritas:
yellow /remote (93% used) has reached the WARNING level (90%)
Filesystem 1024-blocks Used Available Capacity Mounted on /dev/sda2 79687996 44199612 35488384 56% / /dev/sda1 104376 42896 61480 42% /boot /dev/sda5 6297208 40768 6256440 1% /tmp /dev/sda6 3148568 832460 2316108 27% /var /dev/sda7 587181884 101079652 486102232 18% /dbbackup /dev/sda8 33446268 30819128 2627140 93% /remote
What is also peculiar is that the 'client data' link does not appear above the graph:
Status unchanged in 16 hours, 56 minutes Status message received from 172.17.1.142
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
If you read hobbit-clients.cfg you will see:
Rules are evaluated from the top of this file and down, and the first
matching rule is used. So you should put the specific rules first, and
the generic rules last.
So your rule should be before:
DISK * 90 95
Lars
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:rsmrcina at wi.rr.com] Skickat: den 26 oktober 2006 16:32 Till: hobbit at hswn.dk Ämne: [hobbit] Disk test not working properly
I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default).
Here is the setting in hobbit-clients.cfg:
HOST=goveritas DISK /remote 95 98
Here is the data on the disk screen for goveritas:
yellow /remote (93% used) has reached the WARNING level (90%)
Filesystem 1024-blocks Used Available Capacity Mounted on /dev/sda2 79687996 44199612 35488384 56% / /dev/sda1 104376 42896 61480 42% /boot /dev/sda5 6297208 40768 6256440 1% /tmp /dev/sda6 3148568 832460 2316108 27% /var /dev/sda7 587181884 101079652 486102232 18% /dbbackup /dev/sda8 33446268 30819128 2627140 93% /remote
What is also peculiar is that the 'client data' link does not appear above the graph:
Status unchanged in 16 hours, 56 minutes Status message received from 172.17.1.142
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
It is, the defaults are all at the end.
Lars Ebeling wrote:
If you read hobbit-clients.cfg you will see:
Rules are evaluated from the top of this file and down, and the first
matching rule is used. So you should put the specific rules first, and
the generic rules last.
So your rule should be before:
DISK * 90 95
Lars
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:rsmrcina at wi.rr.com] Skickat: den 26 oktober 2006 16:32 Till: hobbit at hswn.dk Ämne: [hobbit] Disk test not working properly
I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default).
Here is the setting in hobbit-clients.cfg:
HOST=goveritas DISK /remote 95 98
Here is the data on the disk screen for goveritas:
yellow /remote (93% used) has reached the WARNING level (90%)
Filesystem 1024-blocks Used Available Capacity Mounted on /dev/sda2 79687996 44199612 35488384 56% / /dev/sda1 104376 42896 61480 42% /boot /dev/sda5 6297208 40768 6256440 1% /tmp /dev/sda6 3148568 832460 2316108 27% /var /dev/sda7 587181884 101079652 486102232 18% /dbbackup /dev/sda8 33446268 30819128 2627140 93% /remote
What is also peculiar is that the 'client data' link does not appear above the graph:
Status unchanged in 16 hours, 56 minutes Status message received from 172.17.1.142
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
In my hobbit-clients.cfg , I have commented DISK * 90 95
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:rsmrcina at wi.rr.com] Skickat: den 26 oktober 2006 17:16 Till: hobbit at hswn.dk Ämne: Re: SV: [hobbit] Disk test not working properly
It is, the defaults are all at the end.
Lars Ebeling wrote:
If you read hobbit-clients.cfg you will see:
Rules are evaluated from the top of this file and down, and the
first
matching rule is used. So you should put the specific
rules first, and
the generic rules last.
So your rule should be before:
DISK * 90 95
Lars
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:rsmrcina at wi.rr.com] Skickat: den 26 oktober 2006 16:32 Till: hobbit at hswn.dk Ämne: [hobbit] Disk test not working properly
I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default).
Here is the setting in hobbit-clients.cfg:
HOST=goveritas DISK /remote 95 98
Here is the data on the disk screen for goveritas:
yellow /remote (93% used) has reached the WARNING level (90%)
Filesystem 1024-blocks Used Available
Capacity Mounted on
/dev/sda2 79687996 44199612 35488384 56% / /dev/sda1 104376 42896 61480 42% /boot /dev/sda5 6297208 40768 6256440 1% /tmp /dev/sda6 3148568 832460 2316108 27% /var /dev/sda7 587181884 101079652 486102232
18% /dbbackup /dev/sda8 33446268 30819128 2627140 93% /remoteWhat is also peculiar is that the 'client data' link does not appear above the graph:
Status unchanged in 16 hours, 56 minutes Status message received from 172.17.1.142
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Do disk tests that are not explicitly coded still use the default?
Lars Ebeling wrote:
In my hobbit-clients.cfg , I have commented DISK * 90 95
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:rsmrcina at wi.rr.com] Skickat: den 26 oktober 2006 17:16 Till: hobbit at hswn.dk Ämne: Re: SV: [hobbit] Disk test not working properly
It is, the defaults are all at the end.
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
Seems so. I do not know about C-programming, but in client_config.c I find 90 and 95 ;)
Lars
(I have however learnt Algol, Cobol, APL, PL/1, Assembler, Databus.......)
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:rsmrcina at wi.rr.com] Skickat: den 26 oktober 2006 17:55 Till: hobbit at hswn.dk Ämne: Re: SV: SV: [hobbit] Disk test not working properly
Do disk tests that are not explicitly coded still use the default?
Lars Ebeling wrote:
In my hobbit-clients.cfg , I have commented DISK * 90 95
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:rsmrcina at wi.rr.com] Skickat: den 26 oktober 2006 17:16 Till: hobbit at hswn.dk Ämne: Re: SV: [hobbit] Disk test not working properly
It is, the defaults are all at the end.
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
OK, thanks, I'll give that a try.
Lars Ebeling wrote:
Seems so. I do not know about C-programming, but in client_config.c I find 90 and 95 ;)
Lars
(I have however learnt Algol, Cobol, APL, PL/1, Assembler, Databus.......)
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:rsmrcina at wi.rr.com] Skickat: den 26 oktober 2006 17:55 Till: hobbit at hswn.dk Ämne: Re: SV: SV: [hobbit] Disk test not working properly
Do disk tests that are not explicitly coded still use the default?
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
On Thu, Oct 26, 2006 at 09:31:32AM -0500, Rich Smrcina wrote:
I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default). [snip] What is also peculiar is that the 'client data' link does not appear above the graph:
Could you be running the Big Brother client on this server instead ?
Regards, Henrik
Nope, from the process list:
hobbit 9595 1 0 08:52 ? 00:00:00 /home/hobbit/client/bin/hobbitlaunch --config=/home/hobbit/client/etc/clientlaunch.cfg --log=/home/hobbit/client /logs/clientlaunch.log --pidfile=/home/hobbit/client/logs/clientlaunch.goveritas .pid
Henrik Stoerner wrote:
On Thu, Oct 26, 2006 at 09:31:32AM -0500, Rich Smrcina wrote:
I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default). [snip] What is also peculiar is that the 'client data' link does not appear above the graph:
Could you be running the Big Brother client on this server instead ?
Regards, Henrik
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
-- Rich Smrcina VM Assist, Inc. Phone: 414-491-6001 Ans Service: 360-715-2467 rich.smrcina at vmassist.com
Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
On Thu, Oct 26, 2006 at 10:54:03AM -0500, Rich Smrcina wrote:
Henrik Stoerner wrote:
Could you be running the Big Brother client on this server instead ? Nope, from the process list:
hobbit 9595 1 0 08:52 ? 00:00:00 /home/hobbit/client/bin/hobbitlaunch --config=/home/hobbit/client/etc/clientlaunch.cfg --log=/home/hobbit/client /logs/clientlaunch.log --pidfile=/home/hobbit/client/logs/clientlaunch.goveritas .pid
It's just very odd, because unless you're running hobbitd with the undocumented "--no-clientlog" option, then a disk status must have the "Client data available" link.
Could you try running (as the hobbit user)
$ bbcmd hobbitd_client --test 2006-10-26 22:53:28 Using default environment file /usr/lib/hobbit/server/etc/hobbitserver.cfg Hostname (.=end, ?=dump, !=reload) []: MYHOSTNAME Hosttype []: Test (cpu, mem, disk, proc, log, port): disk Filesystem: /home Yellow at 90%, red at 95%
to see what the configuration ends up being ?
Also, does the command
bb 127.0.0.1 "clientlog MYHOSTNAME"
return any data ?
Henrik
participants (3)
-
henrik＠hswn.dk
-
lars.ebeling＠leopg9.no-ip.org
-
rsmrcina＠wi.rr.com