Multiple graphs for one test
Thanks for the information. I think I followed what you said, but I seem to be missing something along the way.
I have this as part of the TEST2RRD definition in the xymonserver.cfg file:
jboss=ncv
I also have this in the xymonserver.cfg file:
SPLITNCV_jboss="*:GAUGE" GRAPHS_jboss="jboss,jboss1"
Xymon is creating the jboss,*.rrd files as expected.
In the graphs.cfg file, I have two graphs defined as shown below. The first one graphs two data points and the second one graphs three.
Xymon only displays the graph named "jboss". If I flip the names of the two graph definitions ([jboss] becomes [jboss1] and [jboss1] becomes [jboss]), Xymon still only shows one graph, but now it shows the one with three data points instead of two. (Whichever one defined as [jboss] is the one displayed.)
If I view the graph in my browser, I'm able to manually change the "service=ncv:jboss" in the URL to "service=ncv:jboss1" and see the other graph.
So the data collection is working, the graph definitions are OK, and the graphs are being generated. The only thing left is to get both graphs to display on the same page at the same time.
In case it matters, this is Xymon 4.3.17 running on Fedora 20.
[jboss] TITLE JBoss Threads YAXIS Threads DEF:Peakthreads=jboss,Peak_threads.rrd:lambda:AVERAGE DEF:Livethreads=jboss,Live_threads.rrd:lambda:AVERAGE LINE2:Peakthreads#00CCCC:Peak threads LINE2:Livethreads#CC00CC:Live threads COMMENT:\n GPRINT:Peakthreads:LAST:Peak threads \: %5.1lf%s (cur) GPRINT:Peakthreads:MAX: \: %5.1lf%s (max) GPRINT:Peakthreads:MIN: \: %5.1lf%s (min) GPRINT:Peakthreads:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:Livethreads:LAST:Peak threads \: %5.1lf%s (cur) GPRINT:Livethreads:MAX: \: %5.1lf%s (max) GPRINT:Livethreads:MIN: \: %5.1lf%s (min) GPRINT:Livethreads:AVERAGE: \: %5.1lf%s (avg)\n
[jboss1] TITLE JBoss PermGen YAXIS Bytes DEF:PermGenComm=jboss,Perm_Gen_Comm.rrd:lambda:AVERAGE DEF:PermGenMax=jboss,Perm_Gen_Max.rrd:lambda:AVERAGE DEF:PermGenUsed=jboss,Perm_Gen_Used.rrd:lambda:AVERAGE LINE2:PermGenComm#00CCCC:Peak threads LINE2:PermGenMax#AA00CC:Max threads LINE2:PermGenUsed#CC00CC:Used threads COMMENT:\n GPRINT:PermGenComm:LAST:PermGen committed \: %5.1lf%s (cur) GPRINT:PermGenComm:MAX: \: %5.1lf%s (max) GPRINT:PermGenComm:MIN: \: %5.1lf%s (min) GPRINT:PermGenComm:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:PermGenMax:LAST:PermGen max \: %5.1lf%s (cur) GPRINT:PermGenMax:MAX: \: %5.1lf%s (max) GPRINT:PermGenMax:MIN: \: %5.1lf%s (min) GPRINT:PermGenMax:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:PermGenUsed:LAST:PermGen used \: %5.1lf%s (cur) GPRINT:PermGenUsed:MAX: \: %5.1lf%s (max) GPRINT:PermGenUsed:MIN: \: %5.1lf%s (min) GPRINT:PermGenUsed:AVERAGE: \: %5.1lf%s (avg)\n
Galen Johnson <Galen.Johnson at sas.com> wrote ..
Add a line in xymonserver.cfg named GRAPHS_testname="graph1, graph2, ..."
TL;DR
I believe you just need to add a "GRAPHS" line that describes which graphs you want to show (you should already have them defined in your graphs.cfg file. I actually use the terabithia rpms which leverages the include files under the .d folders. This is not special for that build but saves me having to remember to set it up. For example, I have a test named ssdbbasic...I have a file graphs.d/ssdbbasic.cfg that contains my graph definitions and a file xymonserver.cfg.d/ssdbbasic with the following :
GRAPHS_ssdbbasic="ssdbbasic,ssdbbasic1"
TEST2RRD+=",ssdbbasic=ncv"
SPLITNCV_ssdbbasic="*:GAUGE"
You can even split out your rrd definitions if you need (to make them manageable)
=G=
From: Xymon <xymon-bounces at xymon.com> on behalf of xymon at asitshouldbe.com <xymon at asitshouldbe.com> Sent: Monday, April 24, 2017 5:32 PM To: xymon at xymon.com Subject: [Xymon] Multiple graphs for one test
I have a custom test (mytest) that returns multiple pieces of information. The information is showing up on Xymon as expected. I'd like to be able to graph each piece of information separately, but on the same page. Is that possible?
For a simplified example, mytest returns these two pieces of information:
threads connections
I'm using SPLITNCV to store the results in separate rrd files. That's working.
I'm currently graphing the threads data. I want to graph the connections information on the same mytest page, but in a separate graph.
In other words, I want to have multiple graphs using different rrd data files appear on the same Xymon test page.
Is this possible? Does anyone have a quick sample from graphs.cfg and xymonserver.cfg that can point me in the right direction?
Again, this is a simplified example. The actual test is returning 27 different pieces of information. Some of those are related to each other, some are related to other things. They're all related to the same application, which is why I'd like them to all appear on the same page. Each graph will likely have 2-4 different lines.
Thanks.
Ron
I believe what you're looking for is in cgioptions.cfg. Here's the relevant line from mine:
svcstatus.cgi options for a normal (current) status display
CGI_SVC_OPTS="--env=$XYMONENV --no-svcid --history=top --multigraphs=jboss,JMSQueue,cpustat"
Scot Kreienkamp | Senior Systems Engineer | La-Z-Boy Corporate One La-Z-Boy Drive | Monroe, Michigan 48162 | Office: 734-384-6403 | | Mobile: 7349151444 | Email: Scot.Kreienkamp at la-z-boy.com -----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of xymon at asitshouldbe.com Sent: Wednesday, April 26, 2017 10:37 AM To: Galen Johnson <Galen.Johnson at sas.com> Cc: xymon at xymon.com Subject: Re: [Xymon] Multiple graphs for one test
Thanks for the information. I think I followed what you said, but I seem to be missing something along the way.
I have this as part of the TEST2RRD definition in the xymonserver.cfg file:
jboss=ncv
I also have this in the xymonserver.cfg file:
SPLITNCV_jboss="*:GAUGE" GRAPHS_jboss="jboss,jboss1"
Xymon is creating the jboss,*.rrd files as expected.
In the graphs.cfg file, I have two graphs defined as shown below. The first one graphs two data points and the second one graphs three.
Xymon only displays the graph named "jboss". If I flip the names of the two graph definitions ([jboss] becomes [jboss1] and [jboss1] becomes [jboss]), Xymon still only shows one graph, but now it shows the one with three data points instead of two. (Whichever one defined as [jboss] is the one displayed.)
If I view the graph in my browser, I'm able to manually change the "service=ncv:jboss" in the URL to "service=ncv:jboss1" and see the other graph.
So the data collection is working, the graph definitions are OK, and the graphs are being generated. The only thing left is to get both graphs to display on the same page at the same time.
In case it matters, this is Xymon 4.3.17 running on Fedora 20.
[jboss] TITLE JBoss Threads YAXIS Threads DEF:Peakthreads=jboss,Peak_threads.rrd:lambda:AVERAGE DEF:Livethreads=jboss,Live_threads.rrd:lambda:AVERAGE LINE2:Peakthreads#00CCCC:Peak threads LINE2:Livethreads#CC00CC:Live threads COMMENT:\n GPRINT:Peakthreads:LAST:Peak threads \: %5.1lf%s (cur) GPRINT:Peakthreads:MAX: \: %5.1lf%s (max) GPRINT:Peakthreads:MIN: \: %5.1lf%s (min) GPRINT:Peakthreads:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:Livethreads:LAST:Peak threads \: %5.1lf%s (cur) GPRINT:Livethreads:MAX: \: %5.1lf%s (max) GPRINT:Livethreads:MIN: \: %5.1lf%s (min) GPRINT:Livethreads:AVERAGE: \: %5.1lf%s (avg)\n
[jboss1] TITLE JBoss PermGen YAXIS Bytes DEF:PermGenComm=jboss,Perm_Gen_Comm.rrd:lambda:AVERAGE DEF:PermGenMax=jboss,Perm_Gen_Max.rrd:lambda:AVERAGE DEF:PermGenUsed=jboss,Perm_Gen_Used.rrd:lambda:AVERAGE LINE2:PermGenComm#00CCCC:Peak threads LINE2:PermGenMax#AA00CC:Max threads LINE2:PermGenUsed#CC00CC:Used threads COMMENT:\n GPRINT:PermGenComm:LAST:PermGen committed \: %5.1lf%s (cur) GPRINT:PermGenComm:MAX: \: %5.1lf%s (max) GPRINT:PermGenComm:MIN: \: %5.1lf%s (min) GPRINT:PermGenComm:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:PermGenMax:LAST:PermGen max \: %5.1lf%s (cur) GPRINT:PermGenMax:MAX: \: %5.1lf%s (max) GPRINT:PermGenMax:MIN: \: %5.1lf%s (min) GPRINT:PermGenMax:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:PermGenUsed:LAST:PermGen used \: %5.1lf%s (cur) GPRINT:PermGenUsed:MAX: \: %5.1lf%s (max) GPRINT:PermGenUsed:MIN: \: %5.1lf%s (min) GPRINT:PermGenUsed:AVERAGE: \: %5.1lf%s (avg)\n
Galen Johnson <Galen.Johnson at sas.com> wrote ..
Add a line in xymonserver.cfg named GRAPHS_testname="graph1, graph2, ..."
TL;DR
I believe you just need to add a "GRAPHS" line that describes which graphs you want to show (you should already have them defined in your graphs.cfg file. I actually use the terabithia rpms which leverages the include files under the .d folders. This is not special for that build but saves me having to remember to set it up. For example, I have a test named ssdbbasic...I have a file graphs.d/ssdbbasic.cfg that contains my graph definitions and a file xymonserver.cfg.d/ssdbbasic with the following :
GRAPHS_ssdbbasic="ssdbbasic,ssdbbasic1"
TEST2RRD+=",ssdbbasic=ncv"
SPLITNCV_ssdbbasic="*:GAUGE"
You can even split out your rrd definitions if you need (to make them manageable)
=G=
From: Xymon <xymon-bounces at xymon.com> on behalf of xymon at asitshouldbe.com <xymon at asitshouldbe.com> Sent: Monday, April 24, 2017 5:32 PM To: xymon at xymon.com Subject: [Xymon] Multiple graphs for one test
I have a custom test (mytest) that returns multiple pieces of information. The information is showing up on Xymon as expected. I'd like to be able to graph each piece of information separately, but on the same page. Is that possible?
For a simplified example, mytest returns these two pieces of information:
threads connections
I'm using SPLITNCV to store the results in separate rrd files. That's working.
I'm currently graphing the threads data. I want to graph the connections information on the same mytest page, but in a separate graph.
In other words, I want to have multiple graphs using different rrd data files appear on the same Xymon test page.
Is this possible? Does anyone have a quick sample from graphs.cfg and xymonserver.cfg that can point me in the right direction?
Again, this is a simplified example. The actual test is returning 27 different pieces of information. Some of those are related to each other, some are related to other things. They're all related to the same application, which is why I'd like them to all appear on the same page. Each graph will likely have 2-4 different lines.
Thanks.
Ron
This message is intended only for the individual or entity to which it is addressed. It may contain privileged, confidential information which is exempt from disclosure under applicable laws. If you are not the intended recipient, you are strictly prohibited from disseminating or distributing this information (other than to the intended recipient) or copying this information. If you have received this communication in error, please notify us immediately by e-mail or by telephone at the above number. Thank you.
If that fixes the problem, I'd be curious to understand why. That is not in my configs and I'm running 4.3.28 (terabithia). I'm fairly certain it worked on 4.3.17 (non-terabithia) but I won't swear to it in court.
=G=
From: Scot Kreienkamp <Scot.Kreienkamp at la-z-boy.com> Sent: Wednesday, April 26, 2017 10:52 AM To: xymon at asitshouldbe.com; Galen Johnson Cc: xymon at xymon.com Subject: RE: [Xymon] Multiple graphs for one test
I believe what you're looking for is in cgioptions.cfg. Here's the relevant line from mine:
svcstatus.cgi options for a normal (current) status display
CGI_SVC_OPTS="--env=$XYMONENV --no-svcid --history=top --multigraphs=jboss,JMSQueue,cpustat"
Scot Kreienkamp | Senior Systems Engineer | La-Z-Boy Corporate One La-Z-Boy Drive | Monroe, Michigan 48162 | Office: 734-384-6403 | | Mobile: 7349151444 | Email: Scot.Kreienkamp at la-z-boy.com -----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of xymon at asitshouldbe.com Sent: Wednesday, April 26, 2017 10:37 AM To: Galen Johnson <Galen.Johnson at sas.com> Cc: xymon at xymon.com Subject: Re: [Xymon] Multiple graphs for one test
Thanks for the information. I think I followed what you said, but I seem to be missing something along the way.
I have this as part of the TEST2RRD definition in the xymonserver.cfg file:
jboss=ncv
I also have this in the xymonserver.cfg file:
SPLITNCV_jboss="*:GAUGE" GRAPHS_jboss="jboss,jboss1"
Xymon is creating the jboss,*.rrd files as expected.
In the graphs.cfg file, I have two graphs defined as shown below. The first one graphs two data points and the second one graphs three.
Xymon only displays the graph named "jboss". If I flip the names of the two graph definitions ([jboss] becomes [jboss1] and [jboss1] becomes [jboss]), Xymon still only shows one graph, but now it shows the one with three data points instead of two. (Whichever one defined as [jboss] is the one displayed.)
If I view the graph in my browser, I'm able to manually change the "service=ncv:jboss" in the URL to "service=ncv:jboss1" and see the other graph.
So the data collection is working, the graph definitions are OK, and the graphs are being generated. The only thing left is to get both graphs to display on the same page at the same time.
In case it matters, this is Xymon 4.3.17 running on Fedora 20.
[jboss] TITLE JBoss Threads YAXIS Threads DEF:Peakthreads=jboss,Peak_threads.rrd:lambda:AVERAGE DEF:Livethreads=jboss,Live_threads.rrd:lambda:AVERAGE LINE2:Peakthreads#00CCCC:Peak threads LINE2:Livethreads#CC00CC:Live threads COMMENT:\n GPRINT:Peakthreads:LAST:Peak threads \: %5.1lf%s (cur) GPRINT:Peakthreads:MAX: \: %5.1lf%s (max) GPRINT:Peakthreads:MIN: \: %5.1lf%s (min) GPRINT:Peakthreads:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:Livethreads:LAST:Peak threads \: %5.1lf%s (cur) GPRINT:Livethreads:MAX: \: %5.1lf%s (max) GPRINT:Livethreads:MIN: \: %5.1lf%s (min) GPRINT:Livethreads:AVERAGE: \: %5.1lf%s (avg)\n
[jboss1] TITLE JBoss PermGen YAXIS Bytes DEF:PermGenComm=jboss,Perm_Gen_Comm.rrd:lambda:AVERAGE DEF:PermGenMax=jboss,Perm_Gen_Max.rrd:lambda:AVERAGE DEF:PermGenUsed=jboss,Perm_Gen_Used.rrd:lambda:AVERAGE LINE2:PermGenComm#00CCCC:Peak threads LINE2:PermGenMax#AA00CC:Max threads LINE2:PermGenUsed#CC00CC:Used threads COMMENT:\n GPRINT:PermGenComm:LAST:PermGen committed \: %5.1lf%s (cur) GPRINT:PermGenComm:MAX: \: %5.1lf%s (max) GPRINT:PermGenComm:MIN: \: %5.1lf%s (min) GPRINT:PermGenComm:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:PermGenMax:LAST:PermGen max \: %5.1lf%s (cur) GPRINT:PermGenMax:MAX: \: %5.1lf%s (max) GPRINT:PermGenMax:MIN: \: %5.1lf%s (min) GPRINT:PermGenMax:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:PermGenUsed:LAST:PermGen used \: %5.1lf%s (cur) GPRINT:PermGenUsed:MAX: \: %5.1lf%s (max) GPRINT:PermGenUsed:MIN: \: %5.1lf%s (min) GPRINT:PermGenUsed:AVERAGE: \: %5.1lf%s (avg)\n
Galen Johnson <Galen.Johnson at sas.com> wrote ..
Add a line in xymonserver.cfg named GRAPHS_testname="graph1, graph2, ..."
TL;DR
I believe you just need to add a "GRAPHS" line that describes which graphs you want to show (you should already have them defined in your graphs.cfg file. I actually use the terabithia rpms which leverages the include files under the .d folders. This is not special for that build but saves me having to remember to set it up. For example, I have a test named ssdbbasic...I have a file graphs.d/ssdbbasic.cfg that contains my graph definitions and a file xymonserver.cfg.d/ssdbbasic with the following :
GRAPHS_ssdbbasic="ssdbbasic,ssdbbasic1"
TEST2RRD+=",ssdbbasic=ncv"
SPLITNCV_ssdbbasic="*:GAUGE"
You can even split out your rrd definitions if you need (to make them manageable)
=G=
From: Xymon <xymon-bounces at xymon.com> on behalf of xymon at asitshouldbe.com <xymon at asitshouldbe.com> Sent: Monday, April 24, 2017 5:32 PM To: xymon at xymon.com Subject: [Xymon] Multiple graphs for one test
I have a custom test (mytest) that returns multiple pieces of information. The information is showing up on Xymon as expected. I'd like to be able to graph each piece of information separately, but on the same page. Is that possible?
For a simplified example, mytest returns these two pieces of information:
threads connections
I'm using SPLITNCV to store the results in separate rrd files. That's working.
I'm currently graphing the threads data. I want to graph the connections information on the same mytest page, but in a separate graph.
In other words, I want to have multiple graphs using different rrd data files appear on the same Xymon test page.
Is this possible? Does anyone have a quick sample from graphs.cfg and xymonserver.cfg that can point me in the right direction?
Again, this is a simplified example. The actual test is returning 27 different pieces of information. Some of those are related to each other, some are related to other things. They're all related to the same application, which is why I'd like them to all appear on the same page. Each graph will likely have 2-4 different lines.
Thanks.
Ron
This message is intended only for the individual or entity to which it is addressed. It may contain privileged, confidential information which is exempt from disclosure under applicable laws. If you are not the intended recipient, you are strictly prohibited from disseminating or distributing this information (other than to the intended recipient) or copying this information. If you have received this communication in error, please notify us immediately by e-mail or by telephone at the above number. Thank you.
The multigraphs option tells xymon to graph up to 4 variables on a graph then move to the next graph, on and on, for the test names passed to the multigraphs option.
Scot Kreienkamp | Senior Systems Engineer | La-Z-Boy Corporate One La-Z-Boy Drive | Monroe, Michigan 48162 | Office: 734-384-6403 | | Mobile: 7349151444 | Email: Scot.Kreienkamp at la-z-boy.com -----Original Message----- From: Galen Johnson [mailto:Galen.Johnson at sas.com] Sent: Wednesday, April 26, 2017 10:57 AM To: Scot Kreienkamp <Scot.Kreienkamp at la-z-boy.com>; xymon at asitshouldbe.com Cc: xymon at xymon.com Subject: Re: [Xymon] Multiple graphs for one test
If that fixes the problem, I'd be curious to understand why. That is not in my configs and I'm running 4.3.28 (terabithia). I'm fairly certain it worked on 4.3.17 (non-terabithia) but I won't swear to it in court.
=G=
From: Scot Kreienkamp <Scot.Kreienkamp at la-z-boy.com> Sent: Wednesday, April 26, 2017 10:52 AM To: xymon at asitshouldbe.com; Galen Johnson Cc: xymon at xymon.com Subject: RE: [Xymon] Multiple graphs for one test
I believe what you're looking for is in cgioptions.cfg. Here's the relevant line from mine:
svcstatus.cgi options for a normal (current) status display
CGI_SVC_OPTS="--env=$XYMONENV --no-svcid --history=top --multigraphs=jboss,JMSQueue,cpustat"
-----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of xymon at asitshouldbe.com Sent: Wednesday, April 26, 2017 10:37 AM To: Galen Johnson <Galen.Johnson at sas.com> Cc: xymon at xymon.com Subject: Re: [Xymon] Multiple graphs for one test
Thanks for the information. I think I followed what you said, but I seem to be missing something along the way.
I have this as part of the TEST2RRD definition in the xymonserver.cfg file:
jboss=ncv
I also have this in the xymonserver.cfg file:
SPLITNCV_jboss="*:GAUGE" GRAPHS_jboss="jboss,jboss1"
Xymon is creating the jboss,*.rrd files as expected.
In the graphs.cfg file, I have two graphs defined as shown below. The first one graphs two data points and the second one graphs three.
Xymon only displays the graph named "jboss". If I flip the names of the two graph definitions ([jboss] becomes [jboss1] and [jboss1] becomes [jboss]), Xymon still only shows one graph, but now it shows the one with three data points instead of two. (Whichever one defined as [jboss] is the one displayed.)
If I view the graph in my browser, I'm able to manually change the "service=ncv:jboss" in the URL to "service=ncv:jboss1" and see the other graph.
So the data collection is working, the graph definitions are OK, and the graphs are being generated. The only thing left is to get both graphs to display on the same page at the same time.
In case it matters, this is Xymon 4.3.17 running on Fedora 20.
[jboss] TITLE JBoss Threads YAXIS Threads DEF:Peakthreads=jboss,Peak_threads.rrd:lambda:AVERAGE DEF:Livethreads=jboss,Live_threads.rrd:lambda:AVERAGE LINE2:Peakthreads#00CCCC:Peak threads LINE2:Livethreads#CC00CC:Live threads COMMENT:\n GPRINT:Peakthreads:LAST:Peak threads \: %5.1lf%s (cur) GPRINT:Peakthreads:MAX: \: %5.1lf%s (max) GPRINT:Peakthreads:MIN: \: %5.1lf%s (min) GPRINT:Peakthreads:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:Livethreads:LAST:Peak threads \: %5.1lf%s (cur) GPRINT:Livethreads:MAX: \: %5.1lf%s (max) GPRINT:Livethreads:MIN: \: %5.1lf%s (min) GPRINT:Livethreads:AVERAGE: \: %5.1lf%s (avg)\n
[jboss1] TITLE JBoss PermGen YAXIS Bytes DEF:PermGenComm=jboss,Perm_Gen_Comm.rrd:lambda:AVERAGE DEF:PermGenMax=jboss,Perm_Gen_Max.rrd:lambda:AVERAGE DEF:PermGenUsed=jboss,Perm_Gen_Used.rrd:lambda:AVERAGE LINE2:PermGenComm#00CCCC:Peak threads LINE2:PermGenMax#AA00CC:Max threads LINE2:PermGenUsed#CC00CC:Used threads COMMENT:\n GPRINT:PermGenComm:LAST:PermGen committed \: %5.1lf%s (cur) GPRINT:PermGenComm:MAX: \: %5.1lf%s (max) GPRINT:PermGenComm:MIN: \: %5.1lf%s (min) GPRINT:PermGenComm:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:PermGenMax:LAST:PermGen max \: %5.1lf%s (cur) GPRINT:PermGenMax:MAX: \: %5.1lf%s (max) GPRINT:PermGenMax:MIN: \: %5.1lf%s (min) GPRINT:PermGenMax:AVERAGE: \: %5.1lf%s (avg)\n GPRINT:PermGenUsed:LAST:PermGen used \: %5.1lf%s (cur) GPRINT:PermGenUsed:MAX: \: %5.1lf%s (max) GPRINT:PermGenUsed:MIN: \: %5.1lf%s (min) GPRINT:PermGenUsed:AVERAGE: \: %5.1lf%s (avg)\n
Galen Johnson <Galen.Johnson at sas.com> wrote ..
Add a line in xymonserver.cfg named GRAPHS_testname="graph1, graph2, ..."
TL;DR
I believe you just need to add a "GRAPHS" line that describes which graphs you want to show (you should already have them defined in your graphs.cfg file. I actually use the terabithia rpms which leverages the include files under the .d folders. This is not special for that build but saves me having to remember to set it up. For example, I have a test named ssdbbasic...I have a file graphs.d/ssdbbasic.cfg that contains my graph definitions and a file xymonserver.cfg.d/ssdbbasic with the following :
GRAPHS_ssdbbasic="ssdbbasic,ssdbbasic1"
TEST2RRD+=",ssdbbasic=ncv"
SPLITNCV_ssdbbasic="*:GAUGE"
You can even split out your rrd definitions if you need (to make them manageable)
=G=
From: Xymon <xymon-bounces at xymon.com> on behalf of xymon at asitshouldbe.com <xymon at asitshouldbe.com> Sent: Monday, April 24, 2017 5:32 PM To: xymon at xymon.com Subject: [Xymon] Multiple graphs for one test
I have a custom test (mytest) that returns multiple pieces of information. The information is showing up on Xymon as expected. I'd like to be able to graph each piece of information separately, but on the same page. Is that possible?
For a simplified example, mytest returns these two pieces of information:
threads connections
I'm using SPLITNCV to store the results in separate rrd files. That's working.
I'm currently graphing the threads data. I want to graph the connections information on the same mytest page, but in a separate graph.
In other words, I want to have multiple graphs using different rrd data files appear on the same Xymon test page.
Is this possible? Does anyone have a quick sample from graphs.cfg and xymonserver.cfg that can point me in the right direction?
Again, this is a simplified example. The actual test is returning 27 different pieces of information. Some of those are related to each other, some are related to other things. They're all related to the same application, which is why I'd like them to all appear on the same page. Each graph will likely have 2-4 different lines.
Thanks.
Ron
This message is intended only for the individual or entity to which it is addressed. It may contain privileged, confidential information which is exempt from disclosure under applicable laws. If you are not the intended recipient, you are strictly prohibited from disseminating or distributing this information (other than to the intended recipient) or copying this information. If you have received this communication in error, please notify us immediately by e-mail or by telephone at the above number. Thank you.
participants (3)
-
Galen.Johnson＠sas.com
-
Scot.Kreienkamp＠la-z-boy.com
-
xymon＠asitshouldbe.com