Need help understanding bbwin settings behavior
I have some questions on bbwin configuration.
from bbwin.cfg <setting name="mode" value="central" /> <setting name="configclass" value="win32" />
In the disk section <setting name="default" warnlevel="85%" paniclevel="95%" />
from hobbit-clients.cfg DEFAULT # These are the built-in defaults. CLOCK 1200 DISK * 90 95 UP 30m
CLASS=win32 DISK C 50 55 # Can be harddrive or mount points DISK D 50 55 # Can be harddrive or mount points
HOST=foo DISK V 101 101 DISK W 101 101
I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green. However, that is not happening. All of the drives are going yellow at 90% and red at 95% which matches default. What am I doing wrong?
Hi.
The DEFAULT section MUST be at the bottom of hobbit-alerts.cfg.
/Johan
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Michael Baydoun Sent: den 14 juni 2011 16:21 To: xymon at xymon.com Subject: [Xymon] Need help understanding bbwin settings behavior
I have some questions on bbwin configuration.
from bbwin.cfg <setting name="mode" value="central" /> <setting name="configclass" value="win32" />
In the disk section <setting name="default" warnlevel="85%" paniclevel="95%" />
from hobbit-clients.cfg DEFAULT # These are the built-in defaults. CLOCK 1200 DISK * 90 95 UP 30m
CLASS=win32 DISK C 50 55 # Can be harddrive or mount points DISK D 50 55 # Can be harddrive or mount points
HOST=foo DISK V 101 101 DISK W 101 101
I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green. However, that is not happening. All of the drives are going yellow at 90% and red at 95% which matches default. What am I doing wrong?
I have no default section at the bottom of my hobbit-alerts.cfg file and everything is working fine...
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Johan Sjöberg Sent: Tuesday, June 14, 2011 10:28 AM To: Michael Baydoun; xymon at xymon.com Subject: Re: [Xymon] Need help understanding bbwin settings behavior
Hi.
The DEFAULT section MUST be at the bottom of hobbit-alerts.cfg.
/Johan
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Michael Baydoun Sent: den 14 juni 2011 16:21 To: xymon at xymon.com Subject: [Xymon] Need help understanding bbwin settings behavior
I have some questions on bbwin configuration.
from bbwin.cfg <setting name="mode" value="central" /> <setting name="configclass" value="win32" />
In the disk section <setting name="default" warnlevel="85%" paniclevel="95%" />
from hobbit-clients.cfg DEFAULT # These are the built-in defaults. CLOCK 1200 DISK * 90 95 UP 30m
CLASS=win32 DISK C 50 55 # Can be harddrive or mount points DISK D 50 55 # Can be harddrive or mount points
HOST=foo DISK V 101 101 DISK W 101 101
I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green. However, that is not happening. All of the drives are going yellow at 90% and red at 95% which matches default. What am I doing wrong?
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.
I believe the meaning is "If you have a DEFAULT section, it must be at the bottom, because it will not be overwritten by later directives and will take precedence over anything you put after it."
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Nordquist, Daniel
Sent: Tuesday, June 14, 2011 1:27 PM
To: xymon at xymon.com
Subject: Re: [Xymon] Need help understanding bbwin settings behavior
I have no default section at the bottom of my hobbit-alerts.cfg file and everything is working fine...
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Johan Sjöberg
Sent: Tuesday, June 14, 2011 10:28 AM
To: Michael Baydoun; xymon at xymon.com
Subject: Re: [Xymon] Need help understanding bbwin settings behavior
Hi.
The DEFAULT section MUST be at the bottom of hobbit-alerts.cfg.
/Johan
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Michael Baydoun
Sent: den 14 juni 2011 16:21
To: xymon at xymon.com
Subject: [Xymon] Need help understanding bbwin settings behavior
I have some questions on bbwin configuration.
from bbwin.cfg
<setting name="mode" value="central" />
<setting name="configclass" value="win32" />
In the disk section
<setting name="default" warnlevel="85%" paniclevel="95%" />
from hobbit-clients.cfg
DEFAULT
# These are the built-in defaults.
CLOCK 1200
DISK * 90 95
UP 30m
CLASS=win32
DISK C 50 55 # Can be harddrive or mount points
DISK D 50 55 # Can be harddrive or mount points
HOST=foo
DISK V 101 101
DISK W 101 101
I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green. However, that is not happening. All of the drives are going yellow at 90% and red at 95% which matches default. What am I doing wrong?This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.Ok, understood. So what we need to convey to Michael is that the default section should be at the bottom of his hobbit-clients.cfg file, not his hobbit-alerts.cfg file, in order to work most efficiently. I'm sure it was just a simple mistake in the file name mentioned and I didn't catch what he really meant because of that. And the fact that I'm still pretty much a noob with hobbit.
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Rob Munsch Sent: Tuesday, June 14, 2011 1:57 PM To: xymon at xymon.com Subject: Re: [Xymon] Need help understanding bbwin settings behavior
I believe the meaning is "If you have a DEFAULT section, it must be at the bottom, because it will not be overwritten by later directives and will take precedence over anything you put after it."
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Nordquist, Daniel Sent: Tuesday, June 14, 2011 1:27 PM To: xymon at xymon.com Subject: Re: [Xymon] Need help understanding bbwin settings behavior I have no default section at the bottom of my hobbit-alerts.cfg file and everything is working fine... From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Johan Sjöberg Sent: Tuesday, June 14, 2011 10:28 AM To: Michael Baydoun; xymon at xymon.com Subject: Re: [Xymon] Need help understanding bbwin settings behavior Hi. The DEFAULT section MUST be at the bottom of hobbit-alerts.cfg. /Johan From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Michael Baydoun Sent: den 14 juni 2011 16:21 To: xymon at xymon.com Subject: [Xymon] Need help understanding bbwin settings behavior I have some questions on bbwin configuration.
from bbwin.cfg <setting name="mode" value="central" /> <setting name="configclass" value="win32" />
In the disk section <setting name="default" warnlevel="85%" paniclevel="95%" />
from hobbit-clients.cfg DEFAULT # These are the built-in defaults. CLOCK 1200 DISK * 90 95 UP 30m
CLASS=win32 DISK C 50 55 # Can be harddrive or mount points DISK D 50 55 # Can be harddrive or mount points
HOST=foo DISK V 101 101 DISK W 101 101
I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green. However, that is not happening. All of the drives are going yellow at 90% and red at 95% which matches default. What am I doing wrong?
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com<mailto:postmaster at orlandohealth.com> .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.
Yes, moving from the default section to the bottom resolved my issue, works as expected now. Thanks to all for the assist
On Tue, Jun 14, 2011 at 2:19 PM, Nordquist, Daniel < Daniel.Nordquist at orlandohealth.com> wrote:
Ok, understood. So what we need to convey to Michael is that the default section should be at the bottom of his hobbit-clients.cfg file, not his hobbit-alerts.cfg file, in order to work most efficiently. I’m sure it was just a simple mistake in the file name mentioned and I didn’t catch what he really meant because of that. And the fact that I’m still pretty much a noob with hobbit.
*From:* xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] *On Behalf Of *Rob Munsch *Sent:* Tuesday, June 14, 2011 1:57 PM
*To:* xymon at xymon.com *Subject:* Re: [Xymon] Need help understanding bbwin settings behavior
I believe the meaning is "If you have a DEFAULT section, it must be at the bottom, because it will not be overwritten by later directives and will take precedence over anything you put after it."
*From:* xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] *On Behalf Of *Nordquist, Daniel *Sent:* Tuesday, June 14, 2011 1:27 PM *To:* xymon at xymon.com *Subject:* Re: [Xymon] Need help understanding bbwin settings behavior
I have *no default section* at the bottom of my hobbit-alerts.cfg file and everything is working fine…
*From:* xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] *On Behalf Of *Johan Sjöberg *Sent:* Tuesday, June 14, 2011 10:28 AM *To:* Michael Baydoun; xymon at xymon.com *Subject:* Re: [Xymon] Need help understanding bbwin settings behavior
Hi.
The DEFAULT section MUST be at the bottom of hobbit-alerts.cfg.
/Johan
*From:* xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] *On Behalf Of *Michael Baydoun *Sent:* den 14 juni 2011 16:21 *To:* xymon at xymon.com *Subject:* [Xymon] Need help understanding bbwin settings behavior
I have some questions on bbwin configuration.
from bbwin.cfg <setting name="mode" value="central" /> <setting name="configclass" value="win32" />
In the disk section <setting name="default" warnlevel="85%" paniclevel="95%" />
from hobbit-clients.cfg DEFAULT # These are the built-in defaults. CLOCK 1200 DISK * 90 95 UP 30m
CLASS=win32 DISK C 50 55 # Can be harddrive or mount points DISK D 50 55 # Can be harddrive or mount points
HOST=foo DISK V 101 101 DISK W 101 101
I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green. However, that is not happening. All of the drives are going yellow at 90% and red at 95% which matches default. What am I doing wrong?
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
Oh look at that: you're quite correct, Johan meant to say config, not alerts. Heh. Glad Michael managed to figure that out despite our mangling.
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Michael Baydoun
Sent: Tuesday, June 14, 2011 2:43 PM
To: Nordquist, Daniel
Cc: xymon at xymon.com
Subject: Re: [Xymon] Need help understanding bbwin settings behavior
Yes, moving from the default section to the bottom resolved my issue, works as expected now. Thanks to all for the assist
On Tue, Jun 14, 2011 at 2:19 PM, Nordquist, Daniel <Daniel.Nordquist at orlandohealth.com> wrote:
Ok, understood. So what we need to convey to Michael is that the default section should be at the bottom of his hobbit-clients.cfg file, not his hobbit-alerts.cfg file, in order to work most efficiently. I’m sure it was just a simple mistake in the file name mentioned and I didn’t catch what he really meant because of that. And the fact that I’m still pretty much a noob with hobbit.
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Rob Munsch
Sent: Tuesday, June 14, 2011 1:57 PM
To: xymon at xymon.com
Subject: Re: [Xymon] Need help understanding bbwin settings behavior
I believe the meaning is "If you have a DEFAULT section, it must be at the bottom, because it will not be overwritten by later directives and will take precedence over anything you put after it."
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Nordquist, Daniel
Sent: Tuesday, June 14, 2011 1:27 PM
To: xymon at xymon.com
Subject: Re: [Xymon] Need help understanding bbwin settings behavior
I have no default section at the bottom of my hobbit-alerts.cfg file and everything is working fine…
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Johan Sjöberg
Sent: Tuesday, June 14, 2011 10:28 AM
To: Michael Baydoun; xymon at xymon.com
Subject: Re: [Xymon] Need help understanding bbwin settings behavior
Hi.
The DEFAULT section MUST be at the bottom of hobbit-alerts.cfg.
/Johan
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Michael Baydoun
Sent: den 14 juni 2011 16:21
To: xymon at xymon.com
Subject: [Xymon] Need help understanding bbwin settings behavior
I have some questions on bbwin configuration.
from bbwin.cfg
<setting name="mode" value="central" />
<setting name="configclass" value="win32" />
In the disk section
<setting name="default" warnlevel="85%" paniclevel="95%" />
from hobbit-clients.cfg
DEFAULT
# These are the built-in defaults.
CLOCK 1200
DISK * 90 95
UP 30m
CLASS=win32
DISK C 50 55 # Can be harddrive or mount points
DISK D 50 55 # Can be harddrive or mount points
HOST=foo
DISK V 101 101
DISK W 101 101
I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green. However, that is not happening. All of the drives are going yellow at 90% and red at 95% which matches default. What am I doing wrong?
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health. This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.
_______________________________________________
Xymon mailing list
Xymon at xymon.com
http://lists.xymon.com/mailman/listinfo/xymon
Oh, yes. Of course it should be hobbit-clients and not hobbit-alerts.
/Johan
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Rob Munsch Sent: den 14 juni 2011 20:50 To: Michael Baydoun; Nordquist, Daniel Cc: xymon at xymon.com Subject: Re: [Xymon] Need help understanding bbwin settings behavior
Oh look at that: you're quite correct, Johan meant to say config, not alerts. Heh. Glad Michael managed to figure that out despite our mangling.
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Michael Baydoun Sent: Tuesday, June 14, 2011 2:43 PM To: Nordquist, Daniel Cc: xymon at xymon.com Subject: Re: [Xymon] Need help understanding bbwin settings behavior Yes, moving from the default section to the bottom resolved my issue, works as expected now. Thanks to all for the assist On Tue, Jun 14, 2011 at 2:19 PM, Nordquist, Daniel <Daniel.Nordquist at orlandohealth.com<mailto:Daniel.Nordquist at orlandohealth.com>> wrote: Ok, understood. So what we need to convey to Michael is that the default section should be at the bottom of his hobbit-clients.cfg file, not his hobbit-alerts.cfg file, in order to work most efficiently. I'm sure it was just a simple mistake in the file name mentioned and I didn't catch what he really meant because of that. And the fact that I'm still pretty much a noob with hobbit.
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] On Behalf Of Rob Munsch Sent: Tuesday, June 14, 2011 1:57 PM
To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] Need help understanding bbwin settings behavior
I believe the meaning is "If you have a DEFAULT section, it must be at the bottom, because it will not be overwritten by later directives and will take precedence over anything you put after it."
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] On Behalf Of Nordquist, Daniel Sent: Tuesday, June 14, 2011 1:27 PM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] Need help understanding bbwin settings behavior I have no default section at the bottom of my hobbit-alerts.cfg file and everything is working fine... From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] On Behalf Of Johan Sjöberg Sent: Tuesday, June 14, 2011 10:28 AM To: Michael Baydoun; xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] Need help understanding bbwin settings behavior Hi. The DEFAULT section MUST be at the bottom of hobbit-alerts.cfg. /Johan From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] On Behalf Of Michael Baydoun Sent: den 14 juni 2011 16:21 To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: [Xymon] Need help understanding bbwin settings behavior I have some questions on bbwin configuration.
from bbwin.cfg <setting name="mode" value="central" /> <setting name="configclass" value="win32" />
In the disk section <setting name="default" warnlevel="85%" paniclevel="95%" />
from hobbit-clients.cfg DEFAULT # These are the built-in defaults. CLOCK 1200 DISK * 90 95 UP 30m
CLASS=win32 DISK C 50 55 # Can be harddrive or mount points DISK D 50 55 # Can be harddrive or mount points
HOST=foo DISK V 101 101 DISK W 101 101
I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green. However, that is not happening. All of the drives are going yellow at 90% and red at 95% which matches default. What am I doing wrong?
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com<mailto:postmaster at orlandohealth.com> .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.
This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com<mailto:postmaster at orlandohealth.com> .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.
Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
The DEFAULT section, if present, MUST be at the bottom of hobbit-alerts.cfg.
FTFY
On Tue, June 14, 2011 13:26, Nordquist, Daniel wrote:
I have no default section at the bottom of my hobbit-alerts.cfg file and everything is working fine...
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Johan Sjöberg Sent: Tuesday, June 14, 2011 10:28 AM To: Michael Baydoun; xymon at xymon.com Subject: Re: [Xymon] Need help understanding bbwin settings behavior
Hi.
The DEFAULT section MUST be at the bottom of hobbit-alerts.cfg.
/Johan
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Michael Baydoun Sent: den 14 juni 2011 16:21 To: xymon at xymon.com Subject: [Xymon] Need help understanding bbwin settings behavior
I have some questions on bbwin configuration.
from bbwin.cfg <setting name="mode" value="central" /> <setting name="configclass" value="win32" />
In the disk section <setting name="default" warnlevel="85%" paniclevel="95%" />
from hobbit-clients.cfg DEFAULT # These are the built-in defaults. CLOCK 1200 DISK * 90 95 UP 30m
CLASS=win32 DISK C 50 55 # Can be harddrive or mount points DISK D 50 55
Can be harddrive or mount points
HOST=foo DISK V 101 101 DISK W 101 101
I am expecting mode central to cause the disk section of bbwin.cfg to be ignored, and for node foo the C and D drives to go yellow at 50%, red at 55%, and the V and W drives to always be green. However, that is not happening. All of the drives are going yellow at 90% and red at 95% which matches default. What am I doing wrong?
________________________________ This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.
This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: postmaster at orlandohealth.com .
If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health. _______________________________________________ Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
participants (5)
-
Daniel.Nordquist＠orlandohealth.com
-
hobbit＠epperson.homelinux.net
-
indymichaelb＠gmail.com
-
Johan.Sjoberg＠deltamanagement.se
-
Munsch＠phillycarshare.org