Whoops ! bb failed to send message - timeout
Hi xymon/hobbit group
Over the past couple of days, I have been trying to set up a xymon with some success.
My setup so far. I have xymon 4.3.0.0 beta2 installed and running on a Fedora 11 Virtual Machine (VMWare server 1.0.9) on a Windows XP laptop. This xymon server appears to be working correctly with it monitoring itself (bbgen, bbtest, conn, cpu etc) and happily doing connectivity tests to some remote linux/aix servers that I have access to at work. So far, so good.
I now want to do some client monitoring. Initially starting with the in-built monitoring tools (cpu, disk etc), then to develop some of my own scripts (korn/born shell) to monitor my Ingres installations. To start off, I have installed xymon client on another laptop which is also running Fedora 11 (on bare metal rather than via a VM). Although the xymon server is happily pinging the client and showing green on the current status, I do not seem to be able to get it to display any of the other data.
On checking the client, I am getting "Whoops ! bb failed to send message
- timeout" every 5 minutes within hobbitclient.log.
On further checking, I have found that although I can telnet and ping from the server to the client, the client is unable to even ping the server (via IP address) - it just hangs.
Server to Client:
[xymon at beziers etc]$ ping 192.168.1.69
PING 192.168.1.69 (192.168.1.69) 56(84) bytes of data.
64 bytes from 192.168.1.69: icmp_seq=1 ttl=128 time=5.74 ms
64 bytes from 192.168.1.69: icmp_seq=2 ttl=128 time=1.41 ms
64 bytes from 192.168.1.69: icmp_seq=3 ttl=128 time=2.42 ms
Client to Server:
[xymon at lecroisic client]$ ping 192.168.174.129
PING 192.168.174.129 (192.168.174.129) 56(84) bytes of data.
Thinking it might be a firewall issue, I have temporarily disabled all firewall protection on both client and server, and even disabled the firewall on Windows XP (within which the VMawre Server is running the xymon server) - but with no success.
This unfortunately is where my networking knowledge fails me (and thus my plea for help!) and a Google search has not given me any clues (that I can understand).
Any thoughts?
Regards
Mark
Hi Mark,
I presume both laptops are on the same lan? What are the subnet masks of the Xymon server and client - also probably worth advising whether the VM host resides on the same subnet as the client laptop? I'm guessing it could be a mask issue...
Cheers, Phil
2009/11/9 Mark Whalley <Mark.Whalley at ingres.com>
Hi xymon/hobbit group
Over the past couple of days, I have been trying to set up a xymon with some success.
My setup so far. I have xymon 4.3.0.0 beta2 installed and running on a Fedora 11 Virtual Machine (VMWare server 1.0.9) on a Windows XP laptop. This xymon server appears to be working correctly with it monitoring itself (bbgen, bbtest, conn, cpu etc) and happily doing connectivity tests to some remote linux/aix servers that I have access to at work. So far, so good.
I now want to do some client monitoring. Initially starting with the in-built monitoring tools (cpu, disk etc), then to develop some of my own scripts (korn/born shell) to monitor my Ingres installations. To start off, I have installed xymon client on another laptop which is also running Fedora 11 (on bare metal rather than via a VM). Although the xymon server is happily pinging the client and showing green on the current status, I do not seem to be able to get it to display any of the other data.
On checking the client, I am getting “Whoops ! bb failed to send message – timeout” every 5 minutes within hobbitclient.log.
On further checking, I have found that although I can telnet and ping from the server to the client, the client is unable to even ping the server (via IP address) – it just hangs.
Server to Client:
[xymon at beziers etc]$ ping 192.168.1.69
PING 192.168.1.69 (192.168.1.69) 56(84) bytes of data.
64 bytes from 192.168.1.69: icmp_seq=1 ttl=128 time=5.74 ms
64 bytes from 192.168.1.69: icmp_seq=2 ttl=128 time=1.41 ms
64 bytes from 192.168.1.69: icmp_seq=3 ttl=128 time=2.42 ms
Client to Server:
[xymon at lecroisic client]$ ping 192.168.174.129
PING 192.168.174.129 (192.168.174.129) 56(84) bytes of data.
Thinking it might be a firewall issue, I have temporarily disabled all firewall protection on both client and server, and even disabled the firewall on Windows XP (within which the VMawre Server is running the xymon server) – but with no success.
This unfortunately is where my networking knowledge fails me (and thus my plea for help!) and a Google search has not given me any clues (that I can understand).
Any thoughts?
Regards
Mark
On one of my xymon clients, I have a scheduled job that runs every 5 min. This is a perl script, and one of the first tings it does is to log that it has started. It is therefor not likely that this crashes before this logging. The log shows that some of the times it is not executed. This happens approx 10% of the times.
Anyone that have some ide of why this is happening?
Øyvind
Does the client log say anything about it (LOG defined in clientlaunch.cfg)?
On one of my xymon clients, I have a scheduled job that runs every 5 min.
This is a perl script, and one of the first tings it does is to log that it has started.
It is therefor not likely that this crashes before this logging.
The log shows that some of the times it is not executed. This happens approx 10% of the times.
Anyone that have some ide of why this is happening?
Øyvind
-- Mit freundlichen Gruessen Rolf Schrittenlocher
HeBIS-IT, Senckenberganlage 31, 60054 Frankfurt Tel: (49) 69 - 798 28908 Fax: (49) 69 798 28817 LBS: lbs-f at mlist.uni-frankfurt.de Persoenlich: schritte at hebis.uni-frankfurt.de
participants (4)
-
Mark.Whalley＠ingres.com
-
oyvind.bjorge＠telenor.com
-
pmeech＠gmail.com
-
schritte＠hebis.uni-frankfurt.de