MAPÉ - Monitoring App Page Extension
Hi Cami,
I have just installed MAPE on our Xymon installation and I have found that:
I can see MAPE view using Safari ONLY (!). Using IE 9 or Firefox 17 I can see only black screen (?)
I don't know what MAPE version I'm using but I have no hover info for red/yellow hosts. What about adding a version info inside the package?
What about launching parse-config.pl using Xymon's tasks.cfg instead of using xymoncmd in crontab?
In the tree view I can see hosts configured in my hosts.cfg but in some cases also the "group-only" tag text (see attached screen shot)
[cid:image001.png at 01CDD315.E8583040]
Thanks for your great work!
Regards.
Massimo Morsiani Information Technology Dept.
Gilbarco S.r.l. via de' Cattani, 220/G 50145 Firenze, Italy tel: +39-055-30941 fax: +39-055-318603 email: massimo.morsiani at gilbarco.com<mailto:massimo.morsiani at gilbarco.com> web: http://www.gilbarco.it
ü Please consider the environment before printing this e-mail
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Mike Burger Sent: mercoledì 28 novembre 2012 18:42 To: Cami Sardinha; xymon at xymon.com Subject: Re: [Xymon] MAPÉ - Monitoring App Page Extension
Another thing...the tree view appears to ignore NAME directives in the hosts.cfg file and displays the "actual" host rather than the value displayed in the "NAME" field.
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Mike Burger Sent: Wednesday, November 28, 2012 12:39 PM To: Cami Sardinha; xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] MAPÉ - Monitoring App Page Extension
Only one other note...If the "organization" is set to something "long", only around 9 characters show up.
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Mike Burger Sent: Wednesday, November 28, 2012 10:57 AM To: Cami Sardinha; xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] MAPÉ - Monitoring App Page Extension
Very nice, Cami.
I'm wondering about the roadmap...I see that step 1.4 will generate hovering info for red/yellow hosts...will there also be an option to click on the host, in question, to get directly to the alarms? For that matter, will there be an option to click on green hosts to go to their info?
Thanks again...this is a great looking tool.
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Cami Sardinha Sent: Wednesday, November 28, 2012 9:28 AM To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] MAPÉ - Monitoring App Page Extension
Hi all,
Just a quick mail to say there is a download link posted with installation instructions listed on the site ( http://mape.hack.co.za ). Feel free to provide comments or ideas either off or on list.
Cheers, Cami
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for
the sole use of the intended recipient(s) and may contain confidential
information. Any unauthorized review, use, disclosure, alteration or
distribution is strictly prohibited and may violate state or federal law. If you
are not the intended recipient, please contact the sender by reply e-mail,
delete this email and destroy all copies of the message.
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for
the sole use of the intended recipient(s) and may contain confidential
information. Any unauthorized review, use, disclosure, alteration or
distribution is strictly prohibited and may violate state or federal law. If you
are not the intended recipient, please contact the sender by reply e-mail,
delete this email and destroy all copies of the message.
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for
the sole use of the intended recipient(s) and may contain confidential
information. Any unauthorized review, use, disclosure, alteration or
distribution is strictly prohibited and may violate state or federal law. If you
are not the intended recipient, please contact the sender by reply e-mail,
delete this email and destroy all copies of the message.
Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment.
On Wed, Dec 5, 2012 at 7:29 PM, Morsiani, Massimo < massimo.morsiani at gilbarco.com> wrote:
- **I can see MAPE view using Safari ONLY (!). Using IE 9 or Firefox 17 I can see only black screen (?)
I've tested it with Safari / IE9 / FF and Chrome and all of them are displaying correctly. If you could mail me your data.php file that is being generated (off list please) i'll dig through it.
- **I don’t know what MAPE version I’m using but I have no hover info for red/yellow hosts. What about adding a version info inside the package?
Sure, that is a good idea.
- **What about launching parse-config.pl using Xymon’s tasks.cfg instead of using xymoncmd in crontab?
I was doing that at the start but it wasn't working as i wanted it to.
- **In the tree view I can see hosts configured in my hosts.cfg but in some cases also the “group-only” tag text (see attached screen shot)
**
Fixed (along with other group-variants) and i'll include it in the next release.. Thanks for the feedback!
Regards, Cami
Hi Cami,
I have just tested MAPE' last version (1.4) and I have found that:
- I can see MAPE view using Safari ONLY (!). Using IE 9 or Firefox 17 I can see only black screen (?)
Ø Not solved. I can see MAPE view still using Safari only. I have sent you data.php file off list.
- I don't know what MAPE version I'm using but I have no hover info for red/yellow hosts. What about adding a version info inside the package?
Ø Solved. Version tag is now present.
- In the tree view I can see hosts configured in my hosts.cfg but in some cases also the "group-only" tag text (see attached screen shot)
Ø Solved. See attached screen shot.
[cid:image001.png at 01CDD6E5.47C32A80]
Thank you for your work.
Regards.
Massimo Morsiani Information Technology Dept.
Gilbarco S.r.l. via de' Cattani, 220/G 50145 Firenze, Italy tel: +39-055-30941 fax: +39-055-318603 email: massimo.morsiani at gilbarco.com<mailto:massimo.morsiani at gilbarco.com> web: http://www.gilbarco.it
ü Please consider the environment before printing this e-mail
Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment.
Massimo:
When you upgraded (or initially installed), did you edit the parse-config.pl file as well as the config.pl to reflect the proper location of your Xymon installation?
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Morsiani, Massimo Sent: Monday, December 10, 2012 8:48 AM To: Cami Sardinha Cc: xymon at xymon.com Subject: Re: [Xymon] MAPÉ - Monitoring App Page Extension
Hi Cami,
I have just tested MAPE' last version (1.4) and I have found that:
- I can see MAPE view using Safari ONLY (!). Using IE 9 or Firefox 17 I can see only black screen (?)
Ø Not solved. I can see MAPE view still using Safari only. I have sent you data.php file off list.
- I don't know what MAPE version I'm using but I have no hover info for red/yellow hosts. What about adding a version info inside the package?
Ø Solved. Version tag is now present.
- In the tree view I can see hosts configured in my hosts.cfg but in some cases also the "group-only" tag text (see attached screen shot)
Ø Solved. See attached screen shot.
Thank you for your work.
Regards.
Massimo Morsiani Information Technology Dept.
Gilbarco S.r.l.
via de' Cattani, 220/G
50145 Firenze, Italy
tel: +39-055-30941
fax: +39-055-318603
email: massimo.morsiani at gilbarco.com <mailto:massimo.morsiani at gilbarco.com>
web: http://www.gilbarco.it <http://www.gilbarco.it>
ü Please consider the environment before printing this e-mail
Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment.
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure, alteration or distribution is strictly prohibited and may violate state or federal law. If you are not the intended recipient, please contact the sender by reply e-mail, delete this email and destroy all copies of the message.
On Mon, Dec 10, 2012 at 4:48 PM, Mike Burger < Mike.Burger at freedommortgage.com> wrote:
Massimo:****
When you upgraded (or initially installed), did you edit the parse-config.pl file as well as the config.pl to reflect the proper location of your Xymon installation?
The problem is caused by TABS (\t) in his hosts.cfg. JSON is rather strict with those types of things. Next version will replace that automatically when parsing. For those experiencing the same thing, use VIM to search and replace it with :%s/\t/ /g or sed: sed -i "s/\t/ /g" hosts.cfg
Regards, Cami
Interesting. Thanks for the update.
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Cami Sardinha Sent: Monday, December 10, 2012 10:12 AM To: xymon at xymon.com Subject: Re: [Xymon] MAPÉ - Monitoring App Page Extension
On Mon, Dec 10, 2012 at 4:48 PM, Mike Burger <Mike.Burger at freedommortgage.com> wrote:
Massimo:
When you upgraded (or initially installed), did you edit the parse-config.pl file as well as the config.pl to reflect the proper location of your Xymon installation?The problem is caused by TABS (\t) in his hosts.cfg. JSON is rather strict with those types of things.
Next version will replace that automatically when parsing. For those experiencing the same thing,
use VIM to search and replace it with :%s/\t/ /g
or sed: sed -i "s/\t/ /g" hosts.cfg
Regards,
Cami
CONFIDENTIALITY NOTICE: This e-mail message, including all attachments, is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure, alteration or distribution is strictly prohibited and may violate state or federal law. If you are not the intended recipient, please contact the sender by reply e-mail, delete this email and destroy all copies of the message.
Hi all,
I have followed Cami's suggestion (strip away TABS) and something is changed that is I can see MAPE' view in Firefox 17 now, but I cannot see it in IE 9.
Regards.
Massimo Morsiani Information Technology Dept.
Gilbarco S.r.l. via de' Cattani, 220/G 50145 Firenze, Italy tel: +39-055-30941 fax: +39-055-318603 email: massimo.morsiani at gilbarco.com<mailto:massimo.morsiani at gilbarco.com> web: http://www.gilbarco.it
ü Please consider the environment before printing this e-mail
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Cami Sardinha Sent: lunedì 10 dicembre 2012 16:12 To: xymon at xymon.com Subject: Re: [Xymon] MAPÉ - Monitoring App Page Extension
On Mon, Dec 10, 2012 at 4:48 PM, Mike Burger <Mike.Burger at freedommortgage.com<mailto:Mike.Burger at freedommortgage.com>> wrote:
Massimo:
When you upgraded (or initially installed), did you edit the parse-config.pl<http://parse-config.pl> file as well as the config.pl<http://config.pl> to reflect the proper location of your Xymon installation?
The problem is caused by TABS (\t) in his hosts.cfg. JSON is rather strict with those types of things. Next version will replace that automatically when parsing. For those experiencing the same thing, use VIM to search and replace it with :%s/\t/ /g or sed: sed -i "s/\t/ /g" hosts.cfg
Regards, Cami
Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment.
Any progress on getting it to follow "Include" and "Directory" directives? Our entire site is organized this way. This is a very cool add on!
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Morsiani, Massimo Sent: Monday, December 10, 2012 8:48 AM To: Cami Sardinha Cc: xymon at xymon.com Subject: Re: [Xymon] MAPÉ - Monitoring App Page Extension
Hi Cami,
I have just tested MAPE' last version (1.4) and I have found that:
- I can see MAPE view using Safari ONLY (!). Using IE 9 or Firefox 17 I can see only black screen (?)
Ø Not solved. I can see MAPE view still using Safari only. I have sent you data.php file off list.
- I don't know what MAPE version I'm using but I have no hover info for red/yellow hosts. What about adding a version info inside the package?
Ø Solved. Version tag is now present.
- In the tree view I can see hosts configured in my hosts.cfg but in some cases also the "group-only" tag text (see attached screen shot)
Ø Solved. See attached screen shot.
[cid:image001.png at 01CDD6BD.2561C5A0]
Thank you for your work.
Regards.
Massimo Morsiani Information Technology Dept.
Gilbarco S.r.l. via de' Cattani, 220/G 50145 Firenze, Italy tel: +39-055-30941 fax: +39-055-318603 email: massimo.morsiani at gilbarco.com<mailto:massimo.morsiani at gilbarco.com> web: http://www.gilbarco.it
ü Please consider the environment before printing this e-mail
Please be advised that this email may contain confidential information. If you are not the intended recipient, please notify us by email by replying to the sender and delete this message. The sender disclaims that the content of this email constitutes an offer to enter into, or the acceptance of, any agreement; provided that the foregoing does not invalidate the binding effect of any digital or other electronic reproduction of a manual signature that is included in any attachment.
participants (4)
-
cami＠hack.co.za
-
massimo.morsiani＠gilbarco.com
-
Mike.Burger＠FreedomMortgage.com
-
Tom.Moore＠sas.com