Hi,
I'm trying to get the xymon 4.3.7 version to compile a local client by running: configure.client I answer client to the question server or client. After all the other answers I run: make -s (like suggested). Then I get this:
/home/root/xymon-4.3.7/xymond/xymond_worker.c:80: undefined reference to locator_serverup' xymond_worker.o: In function net_worker_run':
/home/root/xymon-4.3.7/xymond/xymond_worker.c:292: undefined reference to locator_init' /home/root/xymon-4.3.7/xymond/xymond_worker.c:298: undefined reference to locator_register_server'
/home/root/xymon-4.3.7/xymond/xymond_worker.c:317: undefined reference to locator_serverdown' /home/root/xymon-4.3.7/xymond/xymond_worker.c:312: undefined reference to locator_serverdown'
../lib/xymonclient.a(timefunc-client.o): In function gettimer': /home/root/xymon-4.3.7/lib/timefunc.c:55: undefined reference to clock_gettime'
../lib/xymonclient.a(timefunc-client.o): In function getntimer': /home/root/xymon-4.3.7/lib/timefunc.c:67: undefined reference to clock_gettime'
collect2: ld returned 1 exit status
make[1]: *** [../client/xymond_client] Error 1
make: *** [xymond-client] Error 2
I found on the internet somewhere that I have to set this variable: export LIBRTDEF=-lrt Then add locator.o at the end of the var: CLIENTLIBOBJS in the lib/Makefile
When I compile, install and run the client it runs but never sends any data to the server. It does run okay for the rest. When I start the bin/xymoncmd and then bin/xymonclient.sh by hand it sends the status to the server.
When I compile the whole package(server and client) in SERVER config mode it's work fine. So only not in the local client config.
Also found out the version 4.2.3 and older work okay with the local client config. After this version the compile problems began an the local client doesn't work anymore.
I'm running CentOS 6.2 x64 and installed all dependencies (pcre, pcre-devel, openssl, openssl-devel, openldap, openldap-devel, rrdtool, rrdtool-devel, gcc, make).
It's not an option to compile the server client and then change the settings to local because the xymond_client is not compiled then.
Is the local client config suppose to work in the latest version? Maybe I'm doing something wrong so any help is appreciated.
Regards,
Frederik Reenders
Hi. Not sure if this is going to help you, but did you make sure to remove the word "local" from the clientlaunch.cfg file and be sure to add your xymon server's IP address to the xymonclient.cfg file?
In our setup, we had the same issue where new clients weren't reporting anything to the xymon server until I removed the "local" from the file and verified the IP address. As soon as we did that it worked almost instantly.
Good luck!
Don K
From: <F.Reenders at utwente.nl<mailto:F.Reenders at utwente.nl>> Date: Fri, 23 Mar 2012 15:35:19 +0000 To: <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: [Xymon] xymon local client not working
Hi,
I’m trying to get the xymon 4.3.7 version to compile a local client by running: configure.client I answer client to the question server or client. After all the other answers I run: make –s (like suggested). Then I get this:
/home/root/xymon-4.3.7/xymond/xymond_worker.c:80: undefined reference to locator_serverup' xymond_worker.o: In function net_worker_run':
/home/root/xymon-4.3.7/xymond/xymond_worker.c:292: undefined reference to locator_init' /home/root/xymon-4.3.7/xymond/xymond_worker.c:298: undefined reference to locator_register_server'
/home/root/xymon-4.3.7/xymond/xymond_worker.c:317: undefined reference to locator_serverdown' /home/root/xymon-4.3.7/xymond/xymond_worker.c:312: undefined reference to locator_serverdown'
../lib/xymonclient.a(timefunc-client.o): In function gettimer': /home/root/xymon-4.3.7/lib/timefunc.c:55: undefined reference to clock_gettime'
../lib/xymonclient.a(timefunc-client.o): In function getntimer': /home/root/xymon-4.3.7/lib/timefunc.c:67: undefined reference to clock_gettime'
collect2: ld returned 1 exit status
make[1]: *** [../client/xymond_client] Error 1
make: *** [xymond-client] Error 2
I found on the internet somewhere that I have to set this variable: export LIBRTDEF=-lrt Then add locator.o at the end of the var: CLIENTLIBOBJS in the lib/Makefile
When I compile, install and run the client it runs but never sends any data to the server. It does run okay for the rest. When I start the bin/xymoncmd and then bin/xymonclient.sh by hand it sends the status to the server.
When I compile the whole package(server and client) in SERVER config mode it’s work fine. So only not in the local client config.
Also found out the version 4.2.3 and older work okay with the local clientconfig. After this version the compile problems began an the local client doesn’t work anymore.
I’m running CentOS 6.2 x64 and installed all dependencies (pcre, pcre-devel, openssl, openssl-devel, openldap, openldap-devel, rrdtool, rrdtool-devel, gcc, make).
It’s not an option to compile the server client and then change the settings to local because the xymond_client is not compiled then.
Is the local client config suppose to work in the latest version? Maybe I’m doing something wrong so any help is appreciated.
Regards,
Frederik Reenders
_______________________________________________ Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Hello Don K,
Thanks for the suggestion but not the solution. If I remove the local parameter it works but it works in server config mode.
Is there anyone who has this local client working in the last xymon(4.3.7) version?
Regards,
Frederik Reenders
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Don Kuhlman Sent: vrijdag 23 maart 2012 17:00 To: xymon at xymon.com Subject: Re: [Xymon] xymon local client not working
Hi. Not sure if this is going to help you, but did you make sure to remove the word "local" from the clientlaunch.cfg file and be sure to add your xymon server's IP address to the xymonclient.cfg file?
In our setup, we had the same issue where new clients weren't reporting anything to the xymon server until I removed the "local" from the file and verified the IP address. As soon as we did that it worked almost instantly.
Good luck!
Don K
From: <F.Reenders at utwente.nl<mailto:F.Reenders at utwente.nl>> Date: Fri, 23 Mar 2012 15:35:19 +0000 To: <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: [Xymon] xymon local client not working
Hi,
I'm trying to get the xymon 4.3.7 version to compile a local client by running: configure.client I answer client to the question server or client. After all the other answers I run: make -s (like suggested). Then I get this:
/home/root/xymon-4.3.7/xymond/xymond_worker.c:80: undefined reference to locator_serverup' xymond_worker.o: In function net_worker_run':
/home/root/xymon-4.3.7/xymond/xymond_worker.c:292: undefined reference to locator_init' /home/root/xymon-4.3.7/xymond/xymond_worker.c:298: undefined reference to locator_register_server'
/home/root/xymon-4.3.7/xymond/xymond_worker.c:317: undefined reference to locator_serverdown' /home/root/xymon-4.3.7/xymond/xymond_worker.c:312: undefined reference to locator_serverdown'
../lib/xymonclient.a(timefunc-client.o): In function gettimer': /home/root/xymon-4.3.7/lib/timefunc.c:55: undefined reference to clock_gettime'
../lib/xymonclient.a(timefunc-client.o): In function getntimer': /home/root/xymon-4.3.7/lib/timefunc.c:67: undefined reference to clock_gettime'
collect2: ld returned 1 exit status
make[1]: *** [../client/xymond_client] Error 1
make: *** [xymond-client] Error 2
I found on the internet somewhere that I have to set this variable: export LIBRTDEF=-lrt Then add locator.o at the end of the var: CLIENTLIBOBJS in the lib/Makefile
When I compile, install and run the client it runs but never sends any data to the server. It does run okay for the rest. When I start the bin/xymoncmd and then bin/xymonclient.sh by hand it sends the status to the server.
When I compile the whole package(server and client) in SERVER config mode it's work fine. So only not in the local client config.
Also found out the version 4.2.3 and older work okay with the local clientconfig. After this version the compile problems began an the local client doesn't work anymore.
I'm running CentOS 6.2 x64 and installed all dependencies (pcre, pcre-devel, openssl, openssl-devel, openldap, openldap-devel, rrdtool, rrdtool-devel, gcc, make).
It's not an option to compile the server client and then change the settings to local because the xymond_client is not compiled then.
Is the local client config suppose to work in the latest version? Maybe I'm doing something wrong so any help is appreciated.
Regards,
Frederik Reenders
_______________________________________________ Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Hi Frederik. Can you clarify what it means "works in server config mode" ?
Regards,
Don K
From: <F.Reenders at utwente.nl<mailto:F.Reenders at utwente.nl>> Date: Tue, 27 Mar 2012 09:53:34 +0000 To: <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: Re: [Xymon] xymon local client not working
Hello Don K,
Thanks for the suggestion but not the solution. If I remove the local parameter it works but it works in server config mode.
Is there anyone who has this local client working in the last xymon(4.3.7) version?
Regards,
Frederik Reenders
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Don Kuhlman Sent: vrijdag 23 maart 2012 17:00 To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] xymon local client not working
Hi. Not sure if this is going to help you, but did you make sure to remove the word "local" from the clientlaunch.cfg file and be sure to add your xymon server's IP address to the xymonclient.cfg file?
In our setup, we had the same issue where new clients weren't reporting anything to the xymon server until I removed the "local" from the file and verified the IP address. As soon as we did that it worked almost instantly.
Good luck!
Don K
From: <F.Reenders at utwente.nl<mailto:F.Reenders at utwente.nl>> Date: Fri, 23 Mar 2012 15:35:19 +0000 To: <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: [Xymon] xymon local client not working
Hi,
I’m trying to get the xymon 4.3.7 version to compile a local client by running: configure.client I answer client to the question server or client. After all the other answers I run: make –s (like suggested). Then I get this:
/home/root/xymon-4.3.7/xymond/xymond_worker.c:80: undefined reference to locator_serverup' xymond_worker.o: In function net_worker_run':
/home/root/xymon-4.3.7/xymond/xymond_worker.c:292: undefined reference to locator_init' /home/root/xymon-4.3.7/xymond/xymond_worker.c:298: undefined reference to locator_register_server'
/home/root/xymon-4.3.7/xymond/xymond_worker.c:317: undefined reference to locator_serverdown' /home/root/xymon-4.3.7/xymond/xymond_worker.c:312: undefined reference to locator_serverdown'
../lib/xymonclient.a(timefunc-client.o): In function gettimer': /home/root/xymon-4.3.7/lib/timefunc.c:55: undefined reference to clock_gettime'
../lib/xymonclient.a(timefunc-client.o): In function getntimer': /home/root/xymon-4.3.7/lib/timefunc.c:67: undefined reference to clock_gettime'
collect2: ld returned 1 exit status
make[1]: *** [../client/xymond_client] Error 1
make: *** [xymond-client] Error 2
I found on the internet somewhere that I have to set this variable: export LIBRTDEF=-lrt Then add locator.o at the end of the var: CLIENTLIBOBJS in the lib/Makefile
When I compile, install and run the client it runs but never sends any data to the server. It does run okay for the rest. When I start the bin/xymoncmd and then bin/xymonclient.sh by hand it sends the status to the server.
When I compile the whole package(server and client) in SERVER config mode it’s work fine. So only not in the local client config.
Also found out the version 4.2.3 and older work okay with the local clientconfig. After this version the compile problems began an the local client doesn’t work anymore.
I’m running CentOS 6.2 x64 and installed all dependencies (pcre, pcre-devel, openssl, openssl-devel, openldap, openldap-devel, rrdtool, rrdtool-devel, gcc, make).
It’s not an option to compile the server client and then change the settings to local because the xymond_client is not compiled then.
Is the local client config suppose to work in the latest version? Maybe I’m doing something wrong so any help is appreciated.
Regards,
Frederik Reenders
_______________________________________________ Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon _______________________________________________ Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Hi Don K,
That means that the configuration for tests is specified on the server. Like what procs or ports to check. If you don't use that it will take the default defined on the server.
You can test it by adding this to the ~xymon/server/etc/analysis.cfg file on the server:
HOST=hostname.localdomain PROC nonexistingfile
And then of course replace the hostname.localdomain with the hostname of your client(same as in the hosts.cfg file). If you add this and the procs go red in xymon you are using a server side config.
Regards,
Frederik
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Don Kuhlman Sent: woensdag 28 maart 2012 15:07 To: Xymon Email List Subject: Re: [Xymon] xymon local client not working
Hi Frederik. Can you clarify what it means "works in server config mode" ?
Regards,
Don K
From: <F.Reenders at utwente.nl<mailto:F.Reenders at utwente.nl>> Date: Tue, 27 Mar 2012 09:53:34 +0000 To: <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: Re: [Xymon] xymon local client not working
Hello Don K,
Thanks for the suggestion but not the solution. If I remove the local parameter it works but it works in server config mode.
Is there anyone who has this local client working in the last xymon(4.3.7) version?
Regards,
Frederik Reenders
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Don Kuhlman Sent: vrijdag 23 maart 2012 17:00 To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] xymon local client not working
Hi. Not sure if this is going to help you, but did you make sure to remove the word "local" from the clientlaunch.cfg file and be sure to add your xymon server's IP address to the xymonclient.cfg file?
In our setup, we had the same issue where new clients weren't reporting anything to the xymon server until I removed the "local" from the file and verified the IP address. As soon as we did that it worked almost instantly.
Good luck!
Don K
From: <F.Reenders at utwente.nl<mailto:F.Reenders at utwente.nl>> Date: Fri, 23 Mar 2012 15:35:19 +0000 To: <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: [Xymon] xymon local client not working
Hi,
I'm trying to get the xymon 4.3.7 version to compile a local client by running: configure.client I answer client to the question server or client. After all the other answers I run: make -s (like suggested). Then I get this:
/home/root/xymon-4.3.7/xymond/xymond_worker.c:80: undefined reference to locator_serverup' xymond_worker.o: In function net_worker_run':
/home/root/xymon-4.3.7/xymond/xymond_worker.c:292: undefined reference to locator_init' /home/root/xymon-4.3.7/xymond/xymond_worker.c:298: undefined reference to locator_register_server'
/home/root/xymon-4.3.7/xymond/xymond_worker.c:317: undefined reference to locator_serverdown' /home/root/xymon-4.3.7/xymond/xymond_worker.c:312: undefined reference to locator_serverdown'
../lib/xymonclient.a(timefunc-client.o): In function gettimer': /home/root/xymon-4.3.7/lib/timefunc.c:55: undefined reference to clock_gettime'
../lib/xymonclient.a(timefunc-client.o): In function getntimer': /home/root/xymon-4.3.7/lib/timefunc.c:67: undefined reference to clock_gettime'
collect2: ld returned 1 exit status
make[1]: *** [../client/xymond_client] Error 1
make: *** [xymond-client] Error 2
I found on the internet somewhere that I have to set this variable: export LIBRTDEF=-lrt Then add locator.o at the end of the var: CLIENTLIBOBJS in the lib/Makefile
When I compile, install and run the client it runs but never sends any data to the server. It does run okay for the rest. When I start the bin/xymoncmd and then bin/xymonclient.sh by hand it sends the status to the server.
When I compile the whole package(server and client) in SERVER config mode it's work fine. So only not in the local client config.
Also found out the version 4.2.3 and older work okay with the local clientconfig. After this version the compile problems began an the local client doesn't work anymore.
I'm running CentOS 6.2 x64 and installed all dependencies (pcre, pcre-devel, openssl, openssl-devel, openldap, openldap-devel, rrdtool, rrdtool-devel, gcc, make).
It's not an option to compile the server client and then change the settings to local because the xymond_client is not compiled then.
Is the local client config suppose to work in the latest version? Maybe I'm doing something wrong so any help is appreciated.
Regards,
Frederik Reenders
_______________________________________________ Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon _______________________________________________ Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
Thanks Frederik! Now I understand.
Don K
From: <F.Reenders at utwente.nl<mailto:F.Reenders at utwente.nl>> Date: Thu, 29 Mar 2012 07:23:17 +0000 To: Don Kuhlman <don.kuhlman at schawk.com<mailto:don.kuhlman at schawk.com>>, <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: RE: [Xymon] xymon local client not working
Hi Don K,
That means that the configuration for tests is specified on the server. Like what procs or ports to check. If you don’t use that it will take the default defined on the server.
You can test it by adding this to the ~xymon/server/etc/analysis.cfg file on the server:
HOST=hostname.localdomain PROC nonexistingfile
And then of course replace the hostname.localdomain with the hostname of your client(same as in the hosts.cfg file). If you add this and the procs go red in xymon you are using a server side config.
Regards,
Frederik
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Don Kuhlman Sent: woensdag 28 maart 2012 15:07 To: Xymon Email List Subject: Re: [Xymon] xymon local client not working
Hi Frederik. Can you clarify what it means "works in server config mode" ?
Regards,
Don K
From: <F.Reenders at utwente.nl<mailto:F.Reenders at utwente.nl>> Date: Tue, 27 Mar 2012 09:53:34 +0000 To: <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: Re: [Xymon] xymon local client not working
Hello Don K,
Thanks for the suggestion but not the solution. If I remove the local parameter it works but it works in server config mode.
Is there anyone who has this local client working in the last xymon(4.3.7) version?
Regards,
Frederik Reenders
From:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Don Kuhlman Sent: vrijdag 23 maart 2012 17:00 To: xymon at xymon.com<mailto:xymon at xymon.com> Subject: Re: [Xymon] xymon local client not working
Hi. Not sure if this is going to help you, but did you make sure to remove the word "local" from the clientlaunch.cfg file and be sure to add your xymon server's IP address to the xymonclient.cfg file?
In our setup, we had the same issue where new clients weren't reporting anything to the xymon server until I removed the "local" from the file and verified the IP address. As soon as we did that it worked almost instantly.
Good luck!
Don K
From: <F.Reenders at utwente.nl<mailto:F.Reenders at utwente.nl>> Date: Fri, 23 Mar 2012 15:35:19 +0000 To: <xymon at xymon.com<mailto:xymon at xymon.com>> Subject: [Xymon] xymon local client not working
Hi,
I’m trying to get the xymon 4.3.7 version to compile a local client by running: configure.client I answer client to the question server or client. After all the other answers I run: make –s (like suggested). Then I get this:
/home/root/xymon-4.3.7/xymond/xymond_worker.c:80: undefined reference to locator_serverup' xymond_worker.o: In function net_worker_run':
/home/root/xymon-4.3.7/xymond/xymond_worker.c:292: undefined reference to locator_init' /home/root/xymon-4.3.7/xymond/xymond_worker.c:298: undefined reference to locator_register_server'
/home/root/xymon-4.3.7/xymond/xymond_worker.c:317: undefined reference to locator_serverdown' /home/root/xymon-4.3.7/xymond/xymond_worker.c:312: undefined reference to locator_serverdown'
../lib/xymonclient.a(timefunc-client.o): In function gettimer': /home/root/xymon-4.3.7/lib/timefunc.c:55: undefined reference to clock_gettime'
../lib/xymonclient.a(timefunc-client.o): In function getntimer': /home/root/xymon-4.3.7/lib/timefunc.c:67: undefined reference to clock_gettime'
collect2: ld returned 1 exit status
make[1]: *** [../client/xymond_client] Error 1
make: *** [xymond-client] Error 2
I found on the internet somewhere that I have to set this variable: export LIBRTDEF=-lrt Then add locator.o at the end of the var: CLIENTLIBOBJS in the lib/Makefile
When I compile, install and run the client it runs but never sends any data to the server. It does run okay for the rest. When I start the bin/xymoncmd and then bin/xymonclient.sh by hand it sends the status to the server.
When I compile the whole package(server and client) in SERVER config mode it’s work fine. So only not in the local client config.
Also found out the version 4.2.3 and older work okay with the local clientconfig. After this version the compile problems began an the local client doesn’t work anymore.
I’m running CentOS 6.2 x64 and installed all dependencies (pcre, pcre-devel, openssl, openssl-devel, openldap, openldap-devel, rrdtool, rrdtool-devel, gcc, make).
It’s not an option to compile the server client and then change the settings to local because the xymond_client is not compiled then.
Is the local client config suppose to work in the latest version? Maybe I’m doing something wrong so any help is appreciated.
Regards,
Frederik Reenders
_______________________________________________ Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon _______________________________________________ Xymon mailing list Xymon at xymon.com<mailto:Xymon at xymon.com> http://lists.xymon.com/mailman/listinfo/xymon
participants (2)
-
Don.Kuhlman＠schawk.com
-
F.Reenders＠utwente.nl