I have a new machine running Centos 6.6 that for the life of me I can not get started. I compiled 4.3.17 and 4.3.18 to see if it was a bug. With both versions I get the same results.
I've got it narrowed down to the point where is definitely a machine/client problem. With tcpdump I've shown that there are no packets being generated after the (Xymon) client is started. I can ping the server and create a handshake (telnet) to 1984 on the server.
ps running: http://pastebin.com/8sbjyzRs
At this time SElinux is flat out disabled $ sestatus SELinux status: disabled
Host is just one IP, to rule out DNS problems.
$ head pwd/xymonclient.cfg
Environment settings for the Xymon client.
XYMSRV="1.1.1.1" # IP address of the Xymon server
Any suggestions would be very much appreciated and welcomed!
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, March 13, 2015 12:43 pm, Josh Luthman wrote:
I have a new machine running Centos 6.6 that for the life of me I can not get started. I compiled 4.3.17 and 4.3.18 to see if it was a bug. With both versions I get the same results.
I've got it narrowed down to the point where is definitely a machine/client problem. With tcpdump I've shown that there are no packets being generated after the (Xymon) client is started. I can ping the server and create a handshake (telnet) to 1984 on the server.
ps running: http://pastebin.com/8sbjyzRs
At this time SElinux is flat out disabled $ sestatus SELinux status: disabled
Host is just one IP, to rule out DNS problems. $ head
pwd/xymonclient.cfgEnvironment settings for the Xymon client.
XYMSRV="1.1.1.1" # IP address of the Xymon server
Any suggestions would be very much appreciated and welcomed!
Can you add --debug (or send a -USR2) to both xymonlaunch and the 'xymon' call in xymonclient.sh?
Curious if it's a launch problem or a transmission issue.
HTH,
-jc
I assume you mean runclient.sh?
If so I edited start: $XYMONCLIENTHOME/bin/xymonlaunch --config=$XYMONCLIENTHOME/etc/clientlaunch.cfg --log=$XYMONCLIENTHOME/logs/clientlaunch.log --pidfile=$XYMONCLIENTHOME/logs/clientlaunch.$MACHINEDOTS.pid --debug
But I'm not sure what "xymon call" you're referring to?
logs/clientlaunch.log: 2015-03-13 16:24:03 xymonlaunch starting 2015-03-13 16:24:03 Loading tasklist configuration from /home/shire/./etc/client launch.cfg 2016 2015-03-13 16:24:03 Opening file /home/shire/./etc/clientlaunch.cfg 2016 2015-03-13 16:24:03 2016 2015-03-13 16:24:03 Starting tasklist scan 2016 2015-03-13 16:24:03 About to start task client 2017 2015-03-13 16:24:03 client -> Loading environment from /home/shire/./etc/xy monclient.cfg area 2017 2015-03-13 16:24:03 Opening file /home/shire/./etc/xymonclient.cfg 2017 2015-03-13 16:24:03 client -> Assigning stdout/stderr to log '/home/shire/. /logs/xymonclient.log' 2016 2015-03-13 16:24:08 2016 2015-03-13 16:24:08 Starting tasklist scan 2016 2015-03-13 16:24:08 Task client active with PID 2017 2016 2015-03-13 16:24:12 2016 2015-03-13 16:24:12 Starting tasklist scan 2016 2015-03-13 16:24:17 2016 2015-03-13 16:24:17 Starting tasklist scan 2016 2015-03-13 16:24:22 2016 2015-03-13 16:24:22 Starting tasklist scan 2016 2015-03-13 16:24:27 2016 2015-03-13 16:24:27 Starting tasklist scan
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 4:13 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
On Fri, March 13, 2015 12:43 pm, Josh Luthman wrote:
I have a new machine running Centos 6.6 that for the life of me I can not get started. I compiled 4.3.17 and 4.3.18 to see if it was a bug. With both versions I get the same results.
I've got it narrowed down to the point where is definitely a machine/client problem. With tcpdump I've shown that there are no packets being generated after the (Xymon) client is started. I can ping the server and create a handshake (telnet) to 1984 on the server.
ps running: http://pastebin.com/8sbjyzRs
At this time SElinux is flat out disabled $ sestatus SELinux status: disabled
Host is just one IP, to rule out DNS problems. $ head
pwd/xymonclient.cfgEnvironment settings for the Xymon client.
XYMSRV="1.1.1.1" # IP address of the Xymon server
Any suggestions would be very much appreciated and welcomed!
Can you add --debug (or send a -USR2) to both xymonlaunch and the 'xymon' call in xymonclient.sh?
Curious if it's a launch problem or a transmission issue.
HTH,
-jc
On Fri, March 13, 2015 1:25 pm, Josh Luthman wrote:
I assume you mean runclient.sh?
If so I edited start: $XYMONCLIENTHOME/bin/xymonlaunch --config=$XYMONCLIENTHOME/etc/clientlaunch.cfg --log=$XYMONCLIENTHOME/logs/clientlaunch.log --pidfile=$XYMONCLIENTHOME/logs/clientlaunch.$MACHINEDOTS.pid --debug
But I'm not sure what "xymon call" you're referring to?
logs/clientlaunch.log: 2015-03-13 16:24:03 xymonlaunch starting 2015-03-13 16:24:03 Loading tasklist configuration from /home/shire/./etc/client launch.cfg 2016 2015-03-13 16:24:03 Opening file /home/shire/./etc/clientlaunch.cfg 2016 2015-03-13 16:24:03 2016 2015-03-13 16:24:03 Starting tasklist scan 2016 2015-03-13 16:24:03 About to start task client 2017 2015-03-13 16:24:03 client -> Loading environment from /home/shire/./etc/xy monclient.cfg area 2017 2015-03-13 16:24:03 Opening file /home/shire/./etc/xymonclient.cfg 2017 2015-03-13 16:24:03 client -> Assigning stdout/stderr to log '/home/shire/. /logs/xymonclient.log' 2016 2015-03-13 16:24:08 2016 2015-03-13 16:24:08 Starting tasklist scan 2016 2015-03-13 16:24:08 Task client active with PID 2017 2016 2015-03-13 16:24:12 2016 2015-03-13 16:24:12 Starting tasklist scan 2016 2015-03-13 16:24:17 2016 2015-03-13 16:24:17 Starting tasklist scan 2016 2015-03-13 16:24:22 2016 2015-03-13 16:24:22 Starting tasklist scan 2016 2015-03-13 16:24:27 2016 2015-03-13 16:24:27 Starting tasklist scan
Well, that's good. It means the client task is getting launched properly.
the "xymon call" is actually "$XYMON $XYMSRV..." in what should be /home/shire/./bin/xymonclient.sh, based on what the output here. You'd want to change that to "$XYMON --debug $XYMSRV..."
After that, can you run the following?
/home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x /home/shire/./bin/xymonclient.sh
That should give us more indication of where we're failing.
HTH,
-jc
in ~/bin/xymonclient.sh $XYMON --debug $XYMSRV "@" < $MSGTMPFILE >$LOGFETCHCFG.tmp
$ /home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x sh-4.1$ /home/shire/./bin/xymonclient.sh
- /home/shire/./bin/xymonclient.sh sh-4.1$
Neither of the two logs were changed. No output other than what was copied. Should I be looking for something elsewhere?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 4:41 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
On Fri, March 13, 2015 1:25 pm, Josh Luthman wrote:
I assume you mean runclient.sh?
If so I edited start: $XYMONCLIENTHOME/bin/xymonlaunch --config=$XYMONCLIENTHOME/etc/clientlaunch.cfg --log=$XYMONCLIENTHOME/logs/clientlaunch.log --pidfile=$XYMONCLIENTHOME/logs/clientlaunch.$MACHINEDOTS.pid --debug
But I'm not sure what "xymon call" you're referring to?
logs/clientlaunch.log: 2015-03-13 16:24:03 xymonlaunch starting 2015-03-13 16:24:03 Loading tasklist configuration from /home/shire/./etc/client launch.cfg 2016 2015-03-13 16:24:03 Opening file /home/shire/./etc/clientlaunch.cfg 2016 2015-03-13 16:24:03 2016 2015-03-13 16:24:03 Starting tasklist scan 2016 2015-03-13 16:24:03 About to start task client 2017 2015-03-13 16:24:03 client -> Loading environment from /home/shire/./etc/xy monclient.cfg area 2017 2015-03-13 16:24:03 Opening file /home/shire/./etc/xymonclient.cfg 2017 2015-03-13 16:24:03 client -> Assigning stdout/stderr to log '/home/shire/. /logs/xymonclient.log' 2016 2015-03-13 16:24:08 2016 2015-03-13 16:24:08 Starting tasklist scan 2016 2015-03-13 16:24:08 Task client active with PID 2017 2016 2015-03-13 16:24:12 2016 2015-03-13 16:24:12 Starting tasklist scan 2016 2015-03-13 16:24:17 2016 2015-03-13 16:24:17 Starting tasklist scan 2016 2015-03-13 16:24:22 2016 2015-03-13 16:24:22 Starting tasklist scan 2016 2015-03-13 16:24:27 2016 2015-03-13 16:24:27 Starting tasklist scan
Well, that's good. It means the client task is getting launched properly.
the "xymon call" is actually "$XYMON $XYMSRV..." in what should be /home/shire/./bin/xymonclient.sh, based on what the output here. You'd want to change that to "$XYMON --debug $XYMSRV..."
After that, can you run the following?
/home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x /home/shire/./bin/xymonclient.sh
That should give us more indication of where we're failing.
HTH,
-jc
Hi,
Wrapping might have gotten us, but I think
"sh -x /home/shire/./bin/xymonclient.sh"
might not have been on a single line.
-jc
On Fri, March 13, 2015 1:47 pm, Josh Luthman wrote:
in ~/bin/xymonclient.sh $XYMON --debug $XYMSRV "@" < $MSGTMPFILE >$LOGFETCHCFG.tmp
$ /home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x sh-4.1$ /home/shire/./bin/xymonclient.sh
- /home/shire/./bin/xymonclient.sh sh-4.1$
Neither of the two logs were changed. No output other than what was copied. Should I be looking for something elsewhere?
After that, can you run the following?
/home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x /home/shire/./bin/xymonclient.sh
It was wrapping, I actually typed it to make sure there wasn't any copy/paste mess.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 5:21 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
Hi,
Wrapping might have gotten us, but I think
"sh -x /home/shire/./bin/xymonclient.sh"
might not have been on a single line.
-jc
On Fri, March 13, 2015 1:47 pm, Josh Luthman wrote:
in ~/bin/xymonclient.sh $XYMON --debug $XYMSRV "@" < $MSGTMPFILE >$LOGFETCHCFG.tmp
$ /home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x sh-4.1$ /home/shire/./bin/xymonclient.sh
- /home/shire/./bin/xymonclient.sh sh-4.1$
Neither of the two logs were changed. No output other than what was copied. Should I be looking for something elsewhere?
After that, can you run the following?
/home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x /home/shire/./bin/xymonclient.sh
Can you validate that you can execute the xymonclient.sh script manually? Any permissions problems going on?
It seems like we're not even getting to a point where we're executing.
-jc
On Fri, March 13, 2015 2:40 pm, Josh Luthman wrote:
It was wrapping, I actually typed it to make sure there wasn't any copy/paste mess.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 5:21 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
Hi,
Wrapping might have gotten us, but I think
"sh -x /home/shire/./bin/xymonclient.sh"
might not have been on a single line.
-jc
On Fri, March 13, 2015 1:47 pm, Josh Luthman wrote:
in ~/bin/xymonclient.sh $XYMON --debug $XYMSRV "@" < $MSGTMPFILE >$LOGFETCHCFG.tmp
$ /home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x sh-4.1$ /home/shire/./bin/xymonclient.sh
- /home/shire/./bin/xymonclient.sh sh-4.1$
Neither of the two logs were changed. No output other than what was copied. Should I be looking for something elsewhere?
After that, can you run the following?
/home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh
-x
/home/shire/./bin/xymonclient.sh
$ ll xymonclient.sh -rwxr-xr-x 1 shire shire 3333 Mar 13 16:45 xymonclient.sh
$ ./xymonclient.sh
touch: cannot touch /msg..txt.2516': Permission denied ./xymonclient.sh: line 45: /bin/clientupdate: No such file or directory ./xymonclient.sh: line 47: --version: command not found ./xymonclient.sh: line 54: /msg..txt.2516: Permission denied ./xymonclient.sh: line 55: /msg..txt.2516: Permission denied ./xymonclient.sh: line 62: /msg..txt.2516: Permission denied ./xymonclient.sh: line 63: /msg..txt.2516: Permission denied ./xymonclient.sh: line 78: /msg..txt.2516: Permission denied ./xymonclient.sh: line 79: /msg..txt.2516: Permission denied ./xymonclient.sh: line 85: /msg..txt.2516: No such file or directory mv: cannot stat /msg..txt.2516': No such file or directory
Line 45 is: CLIENTVERSION="$XYMONHOME/bin/clientupdate --level"
I'm not seeing any breaks but that does look like the case, no? Not sure what it is supposed to do, it just returns a blank line.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 8:21 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
Can you validate that you can execute the xymonclient.sh script manually? Any permissions problems going on?
It seems like we're not even getting to a point where we're executing.
-jc
On Fri, March 13, 2015 2:40 pm, Josh Luthman wrote:
It was wrapping, I actually typed it to make sure there wasn't any copy/paste mess.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 5:21 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
Hi,
Wrapping might have gotten us, but I think
"sh -x /home/shire/./bin/xymonclient.sh"
might not have been on a single line.
-jc
On Fri, March 13, 2015 1:47 pm, Josh Luthman wrote:
in ~/bin/xymonclient.sh $XYMON --debug $XYMSRV "@" < $MSGTMPFILE >$LOGFETCHCFG.tmp
$ /home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x sh-4.1$ /home/shire/./bin/xymonclient.sh
- /home/shire/./bin/xymonclient.sh sh-4.1$
Neither of the two logs were changed. No output other than what was copied. Should I be looking for something elsewhere?
After that, can you run the following?
/home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh
-x
/home/shire/./bin/xymonclient.sh
Well, at this point we're simply not running in the environment.
Try: /home/shire/bin/xymoncmd --env=/home/shire/etc/xymonclient.cfg
(This should drop you into a subshell)
Then: sh -x bin/xymonclient.sh
-jc
On Fri, March 13, 2015 5:29 pm, Josh Luthman wrote:
$ ll xymonclient.sh -rwxr-xr-x 1 shire shire 3333 Mar 13 16:45 xymonclient.sh
$ ./xymonclient.sh touch: cannot touch
/msg..txt.2516': Permission denied ./xymonclient.sh: line 45: /bin/clientupdate: No such file or directory ./xymonclient.sh: line 47: --version: command not found ./xymonclient.sh: line 54: /msg..txt.2516: Permission denied ./xymonclient.sh: line 55: /msg..txt.2516: Permission denied ./xymonclient.sh: line 62: /msg..txt.2516: Permission denied ./xymonclient.sh: line 63: /msg..txt.2516: Permission denied ./xymonclient.sh: line 78: /msg..txt.2516: Permission denied ./xymonclient.sh: line 79: /msg..txt.2516: Permission denied ./xymonclient.sh: line 85: /msg..txt.2516: No such file or directory mv: cannot stat/msg..txt.2516': No such file or directoryLine 45 is: CLIENTVERSION="
$XYMONHOME/bin/clientupdate --level"I'm not seeing any breaks but that does look like the case, no? Not sure what it is supposed to do, it just returns a blank line.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 8:21 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
Can you validate that you can execute the xymonclient.sh script manually? Any permissions problems going on?
It seems like we're not even getting to a point where we're executing.
-jc
On Fri, March 13, 2015 2:40 pm, Josh Luthman wrote:
It was wrapping, I actually typed it to make sure there wasn't any copy/paste mess.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 5:21 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
Hi,
Wrapping might have gotten us, but I think
"sh -x /home/shire/./bin/xymonclient.sh"
might not have been on a single line.
-jc
On Fri, March 13, 2015 1:47 pm, Josh Luthman wrote:
in ~/bin/xymonclient.sh $XYMON --debug $XYMSRV "@" < $MSGTMPFILE >$LOGFETCHCFG.tmp
$ /home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x sh-4.1$ /home/shire/./bin/xymonclient.sh
- /home/shire/./bin/xymonclient.sh sh-4.1$
Neither of the two logs were changed. No output other than what was copied. Should I be looking for something elsewhere?
After that, can you run the following?
/home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg
sh -x
/home/shire/./bin/xymonclient.sh
Looks pretty clean to me, but I'm not sure what I'm looking for here:
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 9:31 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
Well, at this point we're simply not running in the environment.
Try: /home/shire/bin/xymoncmd --env=/home/shire/etc/xymonclient.cfg
(This should drop you into a subshell)
Then: sh -x bin/xymonclient.sh
-jc
On Fri, March 13, 2015 5:29 pm, Josh Luthman wrote:
$ ll xymonclient.sh -rwxr-xr-x 1 shire shire 3333 Mar 13 16:45 xymonclient.sh
$ ./xymonclient.sh touch: cannot touch
/msg..txt.2516': Permission denied ./xymonclient.sh: line 45: /bin/clientupdate: No such file or directory ./xymonclient.sh: line 47: --version: command not found ./xymonclient.sh: line 54: /msg..txt.2516: Permission denied ./xymonclient.sh: line 55: /msg..txt.2516: Permission denied ./xymonclient.sh: line 62: /msg..txt.2516: Permission denied ./xymonclient.sh: line 63: /msg..txt.2516: Permission denied ./xymonclient.sh: line 78: /msg..txt.2516: Permission denied ./xymonclient.sh: line 79: /msg..txt.2516: Permission denied ./xymonclient.sh: line 85: /msg..txt.2516: No such file or directory mv: cannot stat/msg..txt.2516': No such file or directoryLine 45 is: CLIENTVERSION="
$XYMONHOME/bin/clientupdate --level"I'm not seeing any breaks but that does look like the case, no? Not sure what it is supposed to do, it just returns a blank line.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 8:21 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
Can you validate that you can execute the xymonclient.sh script manually? Any permissions problems going on?
It seems like we're not even getting to a point where we're executing.
-jc
On Fri, March 13, 2015 2:40 pm, Josh Luthman wrote:
It was wrapping, I actually typed it to make sure there wasn't any copy/paste mess.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Fri, Mar 13, 2015 at 5:21 PM, J.C. Cleaver <cleaver at terabithia.org
wrote:
Hi,
Wrapping might have gotten us, but I think
"sh -x /home/shire/./bin/xymonclient.sh"
might not have been on a single line.
-jc
On Fri, March 13, 2015 1:47 pm, Josh Luthman wrote:
in ~/bin/xymonclient.sh $XYMON --debug $XYMSRV "@" < $MSGTMPFILE >$LOGFETCHCFG.tmp
$ /home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x sh-4.1$ /home/shire/./bin/xymonclient.sh
- /home/shire/./bin/xymonclient.sh sh-4.1$
Neither of the two logs were changed. No output other than what was copied. Should I be looking for something elsewhere?
> > > After that, can you run the following? > > /home/shire/./bin/xymoncmd --env=/home/shire/./etc/xymonclient.cfg sh -x > /home/shire/./bin/xymonclient.sh >
On Sat, March 14, 2015 9:53 am, Josh Luthman wrote:
Looks pretty clean to me, but I'm not sure what I'm looking for here:
Indeed, looks normal. Plus, a response was received, since the 'test -s' on the transmission's output tmpfile succeeded.
Can you run /home/shire/bin/xymon --debug <ip from pastebin> "ping"
-jc
IP being the Xymon server?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 14, 2015 8:28 PM, "J.C. Cleaver" <cleaver at terabithia.org> wrote:
On Sat, March 14, 2015 9:53 am, Josh Luthman wrote:
Looks pretty clean to me, but I'm not sure what I'm looking for here:
Indeed, looks normal. Plus, a response was received, since the 'test -s' on the transmission's output tmpfile succeeded.
Can you run /home/shire/bin/xymon --debug <ip from pastebin> "ping"
-jc
Correct. Didn't want to record that for posterity in the list :)
A 'ping' should send a generic output line from the destination server. If you get something back then you know the communications channel is working (and tcpdump should confirm as such).
HTH,
-jc
On Sat, March 14, 2015 5:36 pm, Josh Luthman wrote:
IP being the Xymon server?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 14, 2015 8:28 PM, "J.C. Cleaver" <cleaver at terabithia.org> wrote:
On Sat, March 14, 2015 9:53 am, Josh Luthman wrote:
Looks pretty clean to me, but I'm not sure what I'm looking for here:
Indeed, looks normal. Plus, a response was received, since the 'test -s' on the transmission's output tmpfile succeeded.
Can you run /home/shire/bin/xymon --debug <ip from pastebin> "ping"
-jc
3566 2015-03-14 23:16:01 Connect status is 0
Full output here: http://pastebin.com/rwzAKaYS
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373
On Sat, Mar 14, 2015 at 8:57 PM, J.C. Cleaver <cleaver at terabithia.org> wrote:
Correct. Didn't want to record that for posterity in the list :)
A 'ping' should send a generic output line from the destination server. If you get something back then you know the communications channel is working (and tcpdump should confirm as such).
HTH,
-jc
On Sat, March 14, 2015 5:36 pm, Josh Luthman wrote:
IP being the Xymon server?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 14, 2015 8:28 PM, "J.C. Cleaver" <cleaver at terabithia.org> wrote:
On Sat, March 14, 2015 9:53 am, Josh Luthman wrote:
Looks pretty clean to me, but I'm not sure what I'm looking for here:
Indeed, looks normal. Plus, a response was received, since the 'test -s' on the transmission's output tmpfile succeeded.
Can you run /home/shire/bin/xymon --debug <ip from pastebin> "ping"
-jc
On Sat, March 14, 2015 8:17 pm, Josh Luthman wrote:
3566 2015-03-14 23:16:01 Connect status is 0
Full output here: http://pastebin.com/rwzAKaYS
Josh,
Given this, it seems like your system is capable of and sending data OK to the server.
Can you describe your server config? Any reason this client message would not be accepted server-side? The hobbit server is pretty old, but AFAIK even that far back a current message should work.
Regards,
-jc
I don't see why it wouldn't be accepted. I've never had problems with any clients before. The server is also Centos. What other details are you asking for?
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mar 15, 2015 10:30 AM, "J.C. Cleaver" <cleaver at terabithia.org> wrote:
On Sat, March 14, 2015 8:17 pm, Josh Luthman wrote:
3566 2015-03-14 23:16:01 Connect status is 0
Full output here: http://pastebin.com/rwzAKaYS
Josh,
Given this, it seems like your system is capable of and sending data OK to the server.
Can you describe your server config? Any reason this client message would not be accepted server-side? The hobbit server is pretty old, but AFAIK even that far back a current message should work.
Regards,
-jc
participants (2)
-
cleaver＠terabithia.org
-
josh＠imaginenetworksllc.com