Hello,
I am working on a script to configure alerts to notify different groups when a specific filesystem gets too full.
For example, if mount point a gets 100% full notify group b
If mount point b gets to be 100%, notify group b.
Here is what I have so far. But, I cannot seem to get the output to produce the output for these variables.
$PERCENTUSED
$PERCENTALERT
Also, how do I test via the command line?
Thanks in advance.
#!/bin/sh
single() {
while [ ! "$1" = "" ]
do
while [ ! "$1" = "&red" ]
do
shift
if [ "$1" = "" ]
then
exit
fidone
shift
#&red /mnt/testA (100% used) has reached the PANIC level (99%)
MOUNTPOINT=$1
PERCENTUSED=cat $2 |cut -d"(" -f2
PERCENTALERT=cat $9 |cut -d"(" -f2 |cut -d")" -f1
echo $MOUNTPOINT
echo $PERCENTUSED
echo $PERCENTALERT
lookup $1
echo $1 $2 $3 $4 $5 $6 $7 $8 $9
shift
shift
shift
shift
shift
shift
shift
shift
shift
done
}
lookup() {
MAILTOADDRESS=grep $1 /usr/local/bin/bb/diskalerts/* |cut -d" " -f3
echo $BBHOSTNAME Disk Alert for $MOUNTPOINT reporting $PERCENTUSED of $PERCENTALERT Limit >>/var/tmp/diskalert.$$
echo To acknowledge use code $ACKCODE at >>/var/tmp/diskalert.$$
echo $ACKCODE >/var/tmp/ACKCODE
echo http://bigbrother.zic.pri/xymon-seccgi/bb-ack-enhanced.sh
/var/tmp/diskalert.$$
echo >>/var/tmp/diskalert.$$
cat /var/tmp/diskalert.$$ |mailx -s "Hobbit [$ACKCODE] ${BBHOSTNAME} disk CRITICAL ($BBCOLORLEVEL)" $MAILTOADDRESS
rm /var/tmp/diskalert.$$
}
single $BBALPHAMSG
Regards,
Jody R. McKinzie
Sr. UNIX Administrator
Zenith Insurance Company
Desk: (941) 906-5177
Cell: (941) 806-8205
Fax: (941) 906-7945
Email: jmckinzie at thezenith.com <mailto:jmckinzie at thezenith.com>
www.TheZenith.com <http://www.TheZenith.com>
NOTICE: This e-mail, including attachments, contains information that may be confidential, protected by the attorney/client or other privileges, or exempt from disclosure under applicable law. Further, this e-mail may contain information that is proprietary and/or constitutes a trade secret. This e-mail, including attachments, constitutes non-public information intended to be conveyed only to the designated recipient of this communication, please be advised that any disclosure, dissemination, distribution, copying, or other use of this communication or any attached document is strictly prohibited. If you have received this communication in error, please notify the sender immediately by reply e-mail and promptly destroy all electronic and printed copies of this communication and attached documents.
"Historically speaking, the presence of *wheels* in Unix has never precluded their reinvention." - *Larry Wall*
This feature exists already. Look for GROUP= in the alerts.cfg man page.
Regards Vernon
On 21 December 2011 21:58, McKinzie, Jody <jmckinzie at thezenith.com> wrote:
Hello,****
I am working on a script to configure alerts to notify different groups when a specific filesystem gets too full.****
For example, if mount point a gets 100% full notify group b****
If mount point b gets to be 100%, notify group b.****
Here is what I have so far. But, I cannot seem to get the output to produce the output for these variables.****
$PERCENTUSED****
$PERCENTALERT****
Also, how do I test via the command line?****
Thanks in advance.****
#!/bin/sh****
single() {****
while [ ! "$1" = "" ]****
do****
while [ ! "$1" = "&red" ]****
do****
shift**** if [ "$1" = "" ]**** then**** exit**** fi****done****
shift****
#&red /mnt/testA (100% used) has reached the PANIC level (99%)****
MOUNTPOINT=$1****
PERCENTUSED=
cat $2 |cut -d"(" -f2****PERCENTALERT=
cat $9 |cut -d"(" -f2 |cut -d")" -f1****echo $MOUNTPOINT****
echo $PERCENTUSED****
echo $PERCENTALERT****
lookup $1****
echo $1 $2 $3 $4 $5 $6 $7 $8 $9****
shift****
shift****
shift****
shift****
shift****
shift****
shift****
shift****
shift****
done****
}****
lookup() {****
MAILTOADDRESS=
grep $1 /usr/local/bin/bb/diskalerts/* |cut -d" " -f3** **echo $BBHOSTNAME Disk Alert for $MOUNTPOINT reporting $PERCENTUSED of $PERCENTALERT Limit >>/var/tmp/diskalert.$$****
echo To acknowledge use code $ACKCODE at >>/var/tmp/diskalert.$$****
echo $ACKCODE >/var/tmp/ACKCODE****
echo http://bigbrother.zic.pri/xymon-seccgi/bb-ack-enhanced.sh>>/var/tmp/diskalert.$$
echo >>/var/tmp/diskalert.$$****
cat /var/tmp/diskalert.$$ |mailx -s "Hobbit [$ACKCODE] ${BBHOSTNAME} disk CRITICAL ($BBCOLORLEVEL)" $MAILTOADDRESS****
rm /var/tmp/diskalert.$$****
}****
single $BBALPHAMSG****
------------------------------****
Regards,****
*Jody R. McKinzie*
Sr. UNIX Administrator****
Zenith Insurance Company****
Desk: (941) 906-5177****
Cell: (941) 806-8205****
Fax: (941) 906-7945****
Email: jmckinzie at thezenith.com****
www.TheZenith.com****
NOTICE: This e-mail, including attachments, contains information that may be confidential, protected by the attorney/client or other privileges, or exempt from disclosure under applicable law. Further, this e-mail may contain information that is proprietary and/or constitutes a trade secret. This e-mail, including attachments, constitutes non-public information intended to be conveyed only to the designated recipient of this communication, please be advised that any disclosure, dissemination, distribution, copying, or other use of this communication or any attached document is strictly prohibited. If you have received this communication in error, please notify the sender immediately by reply e-mail and promptly destroy all electronic and printed copies of this communication and attached documents.
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
-- "While it is futile to try to eliminate risk, and questionable to try to minimize it, it is essential that the risks taken be the right risks. "
- Peter F. Drucker
On Wed, Dec 21, 2011 at 8:58 AM, McKinzie, Jody <jmckinzie at thezenith.com> wrote:
Hello,
I am working on a script to configure alerts to notify different groups when a specific filesystem gets too full.
For example, if mount point a gets 100% full notify group b
If mount point b gets to be 100%, notify group b.
Here is what I have so far. But, I cannot seem to get the output to produce the output for these variables.
$PERCENTUSED
$PERCENTALERT
Also, how do I test via the command line?
Thanks in advance.
#!/bin/sh
single() {
while [ ! "$1" = "" ]
do
while [ ! "$1" = "&red" ]
do
shift
if [ "$1" = "" ]
then
exit
fi
done
shift
#&red /mnt/testA (100% used) has reached the PANIC level (99%)
MOUNTPOINT=$1
PERCENTUSED=
cat $2 |cut -d"(" -f2PERCENTALERT=
cat $9 |cut -d"(" -f2 |cut -d")" -f1echo $MOUNTPOINT
echo $PERCENTUSED
echo $PERCENTALERT
lookup $1
echo $1 $2 $3 $4 $5 $6 $7 $8 $9
shift
shift
shift
shift
shift
shift
shift
shift
shift
done
}
lookup() {
MAILTOADDRESS=
grep $1 /usr/local/bin/bb/diskalerts/* |cut -d" " -f3echo $BBHOSTNAME Disk Alert for $MOUNTPOINT reporting $PERCENTUSED of $PERCENTALERT Limit >>/var/tmp/diskalert.$$
echo To acknowledge use code $ACKCODE at >>/var/tmp/diskalert.$$
echo $ACKCODE >/var/tmp/ACKCODE
echo http://bigbrother.zic.pri/xymon-seccgi/bb-ack-enhanced.sh
/var/tmp/diskalert.$$
echo >>/var/tmp/diskalert.$$
cat /var/tmp/diskalert.$$ |mailx -s "Hobbit [$ACKCODE] ${BBHOSTNAME} disk CRITICAL ($BBCOLORLEVEL)" $MAILTOADDRESS
# rm /var/tmp/diskalert.$$
}
single $BBALPHAMSG
OR you could use hobbit's group tag to achieve that.
analysis.cfg
HOST=myhost DISK /a 85 90 GROUP=A DISK /b 85 90 GROUP=B
alerts.cfg
GROUP=A COLOR=red MAIL groupa at example.com GROUP=B COLOR=red MAIL groupb at example.com
Regards,
Jody R. McKinzie
Sr. UNIX Administrator
Zenith Insurance Company
Desk: (941) 906-5177
Cell: (941) 806-8205
Fax: (941) 906-7945
Email: jmckinzie at thezenith.com
www.TheZenith.com
NOTICE: This e-mail, including attachments, contains information that may be confidential, protected by the attorney/client or other privileges, or exempt from disclosure under applicable law. Further, this e-mail may contain information that is proprietary and/or constitutes a trade secret. This e-mail, including attachments, constitutes non-public information intended to be conveyed only to the designated recipient of this communication, please be advised that any disclosure, dissemination, distribution, copying, or other use of this communication or any attached document is strictly prohibited. If you have received this communication in error, please notify the sender immediately by reply e-mail and promptly destroy all electronic and printed copies of this communication and attached documents.
Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon
-- Asif Iqbal PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing?
participants (3)
-
everett.vernon＠gmail.com
-
jmckinzie＠thezenith.com
-
vadud3＠gmail.com