Graphing help with multiple physical & logical CPUS
Hi all,
I have a script that returns data from a host on the utilization of physical and logical CPUS. The data is returned as an NCV like below:
PCPU0 : 5.44 PCPU1 : 0.10 Physical CPU 0 utilization is 5.44% Physical CPU 1 utilization is 0.10%
In my hobbitserver.cfg file I've added "pcpu=ncv" to the TEST2RRD line and my ncv line should handled up to 8 CPUS NCV_pcpu="PCPU0:GAUGE,PCPU1:GAUGE,PCPU2:GAUGE,PCPU3:GAUGE,PCPU4:GAUGE,PC PU5:GAUGE,PCPU6:GAUGE,PCPU7:GAUGE"
I didn't add this to the GRAPHS line because I'm stuck at the RRD defs part in hobbitgraph.cfg. I don't want a separate RRD def for each physcial CPU, but I do want both (or 8) CPUS to show up on the graph. The same for the logical CPUS.
Any ideas??
Thanks -Grs- Gregory R Shea EMC Corporation
Try to look at this howto Henrik did with 2 datasets
http://www.hswn.dk/~henrik/howtograph.txt
and maybe change the line ncv_pcpu line to
NCV_pcpu="*:GAUGE"
shea_greg at emc.com wrote:
Hi all,
I have a script that returns data from a host on the utilization of physical and logical CPUS. The data is returned as an NCV like below:
PCPU0 : 5.44 PCPU1 : 0.10 Physical CPU 0 utilization is 5.44% Physical CPU 1 utilization is 0.10%
In my hobbitserver.cfg file I've added "pcpu=ncv" to the TEST2RRD line and my ncv line should handled up to 8 CPUS NCV_pcpu="PCPU0:GAUGE,PCPU1:GAUGE,PCPU2:GAUGE,PCPU3:GAUGE,PCPU4:GAUGE,PC PU5:GAUGE,PCPU6:GAUGE,PCPU7:GAUGE"
I didn't add this to the GRAPHS line because I'm stuck at the RRD defs part in hobbitgraph.cfg. I don't want a separate RRD def for each physcial CPU, but I do want both (or 8) CPUS to show up on the graph. The same for the logical CPUS.
Any ideas??
Thanks -Grs- Gregory R Shea EMC Corporation
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
Hi Thomas,
Thanks for the update, the NCV line will be so much easier to configure using the wildcard. I've tried a couple of different things for the hobbitgraph.cfg file so that I don't have to include an entry for each CPU (see below), but I was unsuccessful. For a 2 Physical CPU box this isn't so bad and with hyper-threading this would give me 4 logical CPUs. Now it starts to get a little messy. I was hoping there was a way to either use wildcards or a regex in the DEF and LINE2 lines. Sun's T2000 will have a 32 logical CPUs (if I read that right).
So, that's my true dilemna, I guess I was to vague before.
Thanks -Grs- Gregory R Shea EMC Corporation
[pcpu] TITLE Multi-Physical CPU Utilitization YAXIS % Used DEF:a=pcpu.rrd:PCPU0:AVERAGE DEF:b=pcpu.rrd:PCPU1:AVERAGE LINE2:a#@COLOR@:PCPU0 GPRINT:a:LAST: \: %5.1lf (cur) GPRINT:a:MAX: \: %5.1lf (max) GPRINT:a:MIN: \: %5.1lf (min) GPRINT:a:AVERAGE: \: %5.1lf (avg)\n LINE2:b#@COLOR@:PCPU1 GPRINT:b:LAST: \: %5.1lf (cur) GPRINT:b:MAX: \: %5.1lf (max) GPRINT:b:MIN: \: %5.1lf (min) GPRINT:b:AVERAGE: \: %5.1lf (avg)\n
From: Thomas [mailto:tlp-hobbit at holme-pedersen.dk] Sent: Sat 12/9/2006 10:45 AM To: hobbit at hswn.dk Subject: Re: [hobbit] Graphing help with multiple physical & logical CPUS
Try to look at this howto Henrik did with 2 datasets
http://www.hswn.dk/~henrik/howtograph.txt
and maybe change the line ncv_pcpu line to
NCV_pcpu="*:GAUGE"
shea_greg at emc.com wrote:
Hi all,
I have a script that returns data from a host on the utilization of physical and logical CPUS. The data is returned as an NCV like below:
PCPU0 : 5.44 PCPU1 : 0.10 Physical CPU 0 utilization is 5.44% Physical CPU 1 utilization is 0.10%
In my hobbitserver.cfg file I've added "pcpu=ncv" to the TEST2RRD line and my ncv line should handled up to 8 CPUS NCV_pcpu="PCPU0:GAUGE,PCPU1:GAUGE,PCPU2:GAUGE,PCPU3:GAUGE,PCPU4:GAUGE,PC PU5:GAUGE,PCPU6:GAUGE,PCPU7:GAUGE"
I didn't add this to the GRAPHS line because I'm stuck at the RRD defs part in hobbitgraph.cfg. I don't want a separate RRD def for each physcial CPU, but I do want both (or 8) CPUS to show up on the graph. The same for the logical CPUS.
Any ideas??
Thanks -Grs- Gregory R Shea EMC Corporation
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk
participants (2)
-
shea_greg@emc.com
-
tlp-hobbit@holme-pedersen.dk