SUNWlibm delivers floatingpoint.h Damn these limited install options!

And gmake completed successfully. Now let's see if we can get the rest to work. :-)

On 28 November 2014 at 10:50, Vernon Everett <everett.vernon at gmail.com> wrote:

And floatingpoint.h, I think is a Solaris library. SUNWspro, I think. Let me install that and check

On 28 November 2014 at 10:47, Vernon Everett <everett.vernon at gmail.com> wrote:

...

Hi Roland

Started over completely. Used your pkgutil list, and it installed a few packages, mostly around the freetype and libart section. I then did a gmake clean, remover the Makefile and ran configure from scratch. It generated a Makefile. Then I ran gmake. Hit the c-ares issue. Added the -L path, and mentioned above, and we were off again. Then I hit the rrdtool error. Moved the /usr/ccs/bin/ld as mentioned, and we moved ahead again. Then I hit this one.. gcc -g -O2 -Wall -Wno-unused -Wno-pointer-sign -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DSunOS -I/var/tmp/xymon-4.3.17/include -I/opt/csw/include -I/opt/csw/include -DRRDTOOL12 -I/opt/csw/include -c -o perfdata.o perfdata.c In file included from perfdata.c:20:0: /opt/csw/lib/gcc/i386-pc-solaris2.10/4.9.0/include-fixed/math.h:333:27: fatal error: floatingpoint.h: No such file or directory #include <floatingpoint.h> ^ compilation terminated. Makefile:130: recipe for target 'perfdata.o' failed gmake[1]: *** [perfdata.o] Error 1 gmake[1]: Leaving directory '/var/tmp/xymon-4.3.17/web' build/Makefile.rules:111: recipe for target 'web-build' failed gmake: *** [web-build] Error 2

On 28 November 2014 at 10:29, Roland Soderstrom < Rolands at logicaltech.com.au> wrote:

...

I think you miss a dependency.

Use my CSW list.

After finding which one you obviously need to redo configure so all Makefiles are corrected.

•  Roland

*From:* Vernon Everett [mailto:everett.vernon at gmail.com] *Sent:* Friday, 28 November 2014 1:24 PM *To:* Roland Soderstrom *Cc:* Xymon mailinglist *Subject:* Re: [Xymon] Building a new server - part 2

Hi Roland

Thanks for the quick response.

I have built Xymon on Solaris many times too, and agree, it should just work.

I did find something interesting just a minute ago.

Looking through the Makefile, to check what it's looking for, and notices something odd about the c-ares definitions. See below.

Notice the CARESLIBS has no directory defined after the -L

I changed that to CARESLIBS = -L/opt/csw/lib -lcares

And we moved on.

Only to hit another one. gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DSunOS -I/var/tmp/xymon-4.3.17/include -I/opt/csw/include -I/opt/csw/include -I/opt/csw/include -DRRDTOOL12 -c -o do_rrd.o do_rrd.c gcc -o xymond_rrd xymond_rrd.o xymond_worker.o do_rrd.o client_config.o ../lib/libxymontime.a -lrt ../lib/libxymoncomm.a -L/usr/sfw/lib -lssl -lcrypto -lresolv -lsocket -lnsl -lrt -L/opt/csw/lib -lrrd -L/opt/csw/lib -lpcre Undefined first referenced symbol in file XRenderCreateLinearGradient /opt/csw/lib/libcairo.so.2 XRenderCreateRadialGradient /opt/csw/lib/libcairo.so.2 XRenderCreateSolidFill /opt/csw/lib/libcairo.so.2 ld: fatal: Symbol referencing errors. No output written to xymond_rrd collect2: ld returned 1 exit status Makefile:62: recipe for target 'xymond_rrd' failed gmake[1]: *** [xymond_rrd] Error 1 gmake[1]: Leaving directory '/var/tmp/xymon-4.3.17/xymond' build/Makefile.rules:108: recipe for target 'xymond-build' failed gmake: *** [xymond-build] Error 2

My next Xymon install will be on Linux! No exceptions!

--- snip ---

C-ARES settings

SYSTEMCARES = yes CARESINCDIR = -I/opt/csw/include *CARESLIBS = -L -lcares* RPATHVAL +=

PCRE settings

PCREINCDIR = -I/opt/csw/include PCRELIBS = -L/opt/csw/lib -lpcre RPATHVAL += /opt/csw/lib

RRDtool settings

RRDDEF = -DRRDTOOL12 RRDINCDIR = -I/opt/csw/include RRDLIBS = -L/opt/csw/lib -lrrd RPATHVAL += /opt/csw/lib DORRD = yes

OpenSSL settings

SSLFLAGS = -DHAVE_OPENSSL -DHAVE_SSLV2_SUPPORT SSLINCDIR = -I/opt/csw/include SSLLIBS = -L/usr/sfw/lib -lssl -lcrypto RPATHVAL += /usr/sfw/lib DOSSL = yes

--- snip ---

On 28 November 2014 at 10:07, Roland Soderstrom < Rolands at logicaltech.com.au> wrote:

I’ve compiled 4.3.17 on Solaris Sparc and x86 with OpenCSW, so it should work.

This is roughly what I do.

pkgutil -y -i coreutils

pkgutil -y -i gzip

pkgutil -y -i wget

pkgutil -y -a berkeleydb48

pkgutil -y -i freetype

pkgutil -y -i libart

pkgutil -y -i libpng15_15

pkgutil -y -i libtool

pkgutil -i -y gcc4core gcc4g++ gmake

pkgutil -i -y pcre libpcre_dev

pkgutil -i -y rrdtool rrdtool_dev

pkgutil -i -y openssl libssl_dev

pkgutil -i -y openldap_client openldap_dev

pkgutil -i -y fping

export PATH=/usr/bin:/usr/sbin:/opt/csw/bin:/opt/csw/sbin:/usr/ccs/bin

Make SURE /usr/local/<something> or /usr/sfw/<something> is not in any path.

export LD_LIBRARY_PATH=””

crle

which gmake

/opt/csw/bin/gmake

which ld

/usr/ccs/bin/ld

MAKE=gmake ; /configure

gmake

•  Roland

*From:* Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Vernon Everett *Sent:* Friday, 28 November 2014 12:18 PM *To:* Xymon mailinglist *Subject:* [Xymon] Building a new server - part 2

OK, I was correct about the library packages.

Once I installed them, it resolved most of my problems, and the configure script completed OK.

On to the make. (Or gmake in my case) And we hit the next hurdle. gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DSunOS -I/var/tmp/xymon-4.3.17/include -I/opt/csw/include -o xymonnet xymonnet.o contest.o httptest.o httpresult.o ldaptest.o dns.o dns2.o httpcookies.o -L -lcares -L/opt/csw/lib -lldap -llber ../lib/libxymontime.a -lrt ../lib/libxymoncomm.a -L/usr/sfw/lib -lssl -lcrypto -lresolv -lsocket -lnsl -lrt ../lib/libxymon.a -L/opt/csw/lib -lpcre Undefined first referenced symbol in file ares_process dns.o ares_gethostbyname dns.o ares_strerror dns.o ares_init_options dns.o ares_search dns.o ares_fds dns.o ares_destroy dns.o ares_timeout dns.o ares_expand_name dns2.o ld: fatal: Symbol referencing errors. No output written to xymonnet collect2: ld returned 1 exit status Makefile:33: recipe for target 'xymonnet' failed gmake[1]: *** [xymonnet] Error 1 gmake[1]: Leaving directory '/var/tmp/xymon-4.3.17/xymonnet' build/Makefile.rules:102: recipe for target 'xymonnet-build' failed gmake: *** [xymonnet-build] Error 2

Any ideas?

Regards Vernon

--

"Accept the challenges so that you can feel the exhilaration of victory"

• General George Patton

--

"Accept the challenges so that you can feel the exhilaration of victory"

• General George Patton

-- "Accept the challenges so that you can feel the exhilaration of victory"

• General George Patton

-- "Accept the challenges so that you can feel the exhilaration of victory"

• General George Patton

-- "Accept the challenges so that you can feel the exhilaration of victory"

• General George Patton