Some time ago I had found the lm_sensors project. There were some instructions for many hardware. Sorry to say, but right now the web-site http://lm-sensors.org/ have no more content about this.

However the lm-sensors was included in many Linux distributions (at least on CentOS, RHEL 6.x and similar), so it was possible to:

install

yum install lm_sensors

run to detect devices

sensors-detect

and if OK (it has drivers for your hardware) then can get the output:

sensors

acpitz-virtual-0 Adapter: Virtual device temp1: +8.3 C (crit = +31.3 C)

coretemp-isa-0000 Adapter: ISA adapter Physical id 0: +57.0 C (high = +78.0 C, crit = +88.0 C) Core 0: +54.0 C (high = +78.0 C, crit = +88.0 C) Core 1: +52.0 C (high = +78.0 C, crit = +88.0 C) Core 2: +51.0 C (high = +78.0 C, crit = +88.0 C) Core 3: +54.0 C (high = +78.0 C, crit = +88.0 C)

power_meter-acpi-0 Adapter: ACPI interface power1: 0.00 nW (interval = 300.00 s)

coretemp-isa-0004 Adapter: ISA adapter Physical id 1: +50.0 C (high = +78.0 C, crit = +88.0 C) Core 0: +50.0 C (high = +78.0 C, crit = +88.0 C) Core 1: +49.0 C (high = +78.0 C, crit = +88.0 C) Core 2: +45.0 C (high = +78.0 C, crit = +88.0 C) Core 3: +49.0 C (high = +78.0 C, crit = +88.0 C)

Detailed information is available at: https://www.kernel.org/doc/Documentation/thermal/

Please, drop me a mail if You will find anything useful. I am interested too.

Best regards,

Andrey Chervonets

CoMinder Support http://www.cominder.eu/ mobile: +371 26517848