[hobbit] Hobbit EMC Clariion Extention Problem

Incredible, thanks you very much Kirbach!

But I have an issue with the configuration :

I added in my etc/bb-hosts: 10.3.12.9 0601_spa # conn https clariion-cxA:UNUSED_FC_PORTS= NAME:"Room 0601 SPA" "http://0601_spa.mydomain.local/"

etc/hobbitlaunch.cfg:

[clariion-cxA] ENVFILE /home/hobbit/application/server/etc/hobbitserver.cfg NEEDS hobbitd CMD $BBHOME/ext/clariion-cxA.sh LOGFILE $BBSERVERLOGS/clariion-cxA.log INTERVAL 5m

ext/clariion-cxA.sh BBPROG=$(basename $0); export BBPROG TEST="hw" CHECK_TEST="clariion-cxA"

   set -A allowed_parameter "UNUSED_FC_PORTS"
   spacer="   "
   NAVICLI=/opt/Navisphere/bin/navicli
   GAWK=/usr/bin/awk

Service processor 10.3.12.9 of 0601_spa could not be reached. It used to work with the old plugin, what did I bad ?

Thanks by advance.

Selon Kirbach Uwe <U.Kirbach at EnBW.com>:

Hello LMJ,

i had the same problem and extended that's why the check script. I send you my versions for FC4500, FC4700 and CX (CXx00 and CX3-xx) as an attachement.

In my hobbit/etc/bb-hosts i extend the definition for the check: 10.145.6.26 S2A6026 # clariion-cx:UNUSED_FC_PORTS=SPA1,SPA2,SPA3,SPB1,SPB2,SPB3

The type defionition for Clariions in bb-hosts is clariion4500 -> CLARiiON-FC4500.sh clariion4700 -> CLARiiON-FC4700.sh clariion-cx -> CLARiiON-CX.sh (CXx00 & CX3-xx)

Mit freundlichem Gruß

Uwe Kirbach

-- Uwe Kirbach EnBW Systeme Infrastruktur Support GmbH SIS OIOIU Durlacher Allee 93

76131 Karlsruhe

Telefon: +49 (0)721 63 14139 EMail: u.kirbach at enbw.com

EnBW Systeme Infrastruktur Support GmbH Sitz der Gesellschaft: Karlsruhe Handelsregister: Amtsgericht Mannheim HRB 108550 Vorsitzender des Aufsichtsrats: Dr. Bernhard Beck Geschäftsführer: Jochen Adenau, Dr. Peter Kramp

-----Original Message----- From: linuxmasterjedi at free.fr [mailto:linuxmasterjedi at free.fr] Sent: Tuesday, January 22, 2008 8:34 AM To: hobbit at hswn.dk Cc: sabey2000 at hotmail.com Subject: [hobbit] Hobbit EMC Clariion Extention Problem

Hello,

I'm using Hobbit Monitor 4.2.0 with a plugin (EMC CLARiiON FC-4700 Hardware Agent) developped by Sabey to monitor 2 EMC SAN array. This plugin seems to work fine with my EMC CLARiiON CX3-40 except for one thing, look at the printscreen http://linuxmasterjedi.free.fr/Hobbit_EMC-Clariion-Ext_Problem.jpg

SP A Port 2 Status green Link red SP A Port 3 Status green Link red SP B Port 2 Status green Link red SP B Port 3 Status green Link red

red Enclosure SPE SPS A Cabling red Enclosure SPE SPS B Cabling

are in red but this is normal! there is nothing connected on port 2 and 3. Is there a way to fix that somewhere ?

Thanks by advance,

 LMJ

To unsubscribe from the hobbit list, send an e-mail to hobbit-unsubscribe at hswn.dk