[Xymon] QNAP

Joseph,

QNAP exposes a fair bit of stuff with SNMP. I have a bunch of perl scripts that build a xymon client report from various stuff retrieved by SNMP. There is also extra QNAP specific hardware stuff which is well worth setup monitoring for but I haven't done yet (see sample data below) - I will probably do a devmon template. SNMP traps are also handy but are even more convoluted to monitor. If you've never played with SNMP it's fiddly to get right.

David.

NAS-MIB::IfIndex.1 = INTEGER: 1 NAS-MIB::IfIndex.2 = INTEGER: 2 NAS-MIB::IfDescr.1 = STRING: "eth0" NAS-MIB::IfDescr.2 = STRING: "eth1" NAS-MIB::IfPacketsReceived.1 = Counter32: 1278907 NAS-MIB::IfPacketsReceived.2 = Counter32: 1199329 NAS-MIB::IfPacketsSent.1 = Counter32: 852477 NAS-MIB::IfPacketsSent.2 = Counter32: 852471 NAS-MIB::IfErrorPackets.1 = Counter32: 0 NAS-MIB::IfErrorPackets.2 = Counter32: 0 NAS-MIB::HdIndex.1 = INTEGER: 1 NAS-MIB::HdIndex.2 = INTEGER: 2 NAS-MIB::HdIndex.3 = INTEGER: 3 NAS-MIB::HdIndex.4 = INTEGER: 4 NAS-MIB::HdIndex.5 = INTEGER: 5 NAS-MIB::HdDescr.1 = STRING: "HDD1" NAS-MIB::HdDescr.2 = STRING: "HDD2" NAS-MIB::HdDescr.3 = STRING: "HDD3" NAS-MIB::HdDescr.4 = STRING: "HDD4" NAS-MIB::HdDescr.5 = STRING: "HDD5" NAS-MIB::HdTemperature.1 = STRING: "40 C/104 F" NAS-MIB::HdTemperature.2 = STRING: "41 C/105 F" NAS-MIB::HdTemperature.3 = STRING: "41 C/105 F" NAS-MIB::HdTemperature.4 = STRING: "40 C/104 F" NAS-MIB::HdTemperature.5 = STRING: "40 C/104 F" NAS-MIB::HdStatus.1 = INTEGER: ready(0) NAS-MIB::HdStatus.2 = INTEGER: ready(0) NAS-MIB::HdStatus.3 = INTEGER: ready(0) NAS-MIB::HdStatus.4 = INTEGER: ready(0) NAS-MIB::HdStatus.5 = INTEGER: ready(0) NAS-MIB::HdModel.1 = STRING: "ST2000DM001-9YN1" NAS-MIB::HdModel.2 = STRING: "ST2000DM001-9YN1" NAS-MIB::HdModel.3 = STRING: "ST2000DM001-9YN1" NAS-MIB::HdModel.4 = STRING: "ST2000DM001-9YN1" NAS-MIB::HdModel.5 = STRING: "ST2000DM001-9YN1" NAS-MIB::HdCapacity.1 = STRING: "1.82 TB" NAS-MIB::HdCapacity.2 = STRING: "1.82 TB" NAS-MIB::HdCapacity.3 = STRING: "1.82 TB" NAS-MIB::HdCapacity.4 = STRING: "1.82 TB" NAS-MIB::HdCapacity.5 = STRING: "1.82 TB" NAS-MIB::HdSmartInfo.1 = STRING: "GOOD" NAS-MIB::HdSmartInfo.2 = STRING: "GOOD" NAS-MIB::HdSmartInfo.3 = STRING: "GOOD" NAS-MIB::HdSmartInfo.4 = STRING: "GOOD" NAS-MIB::HdSmartInfo.5 = STRING: "GOOD" NAS-MIB::SysFanIndex.1 = INTEGER: 1 NAS-MIB::SysFanDescr.1 = STRING: "System FAN 1" NAS-MIB::SysFanSpeed.1 = STRING: "760 RPM" NAS-MIB::SysVolumeIndex.1 = INTEGER: 1 NAS-MIB::SysVolumeDescr.1 = STRING: "[RAID5 Disk Volume: Drive 1 2 3 4 5]" NAS-MIB::SysVolumeFS.1 = STRING: "EXT4" NAS-MIB::SysVolumeTotalSize.1 = STRING: "7.21 TB" NAS-MIB::SysVolumeFreeSize.1 = STRING: "7.21 TB" NAS-MIB::SysVolumeStatus.1 = STRING: "Ready"

Xymon Users & Admins,

Are there any xymon custom scripts / monitors for monitoring QNAP systems? My QNAP system is behind a private switch so I have two options:

1. Install an xymon client + any custom services scripts on the QNAP itself. (I'm not sure if this is possible as I am fairly new to QNAP systems) or
2. Install a QNAP custom xymon script / monitor on an existing xymon client(which has 1 NIC connected to the private network for qnap services and 1 NIC on the regular subnet which can communicate with the xymon server) that will run the script to probe the QNAP and then relay the results to the xymon server.

If there is no such monitor for QNAP systems, I can settle for a NFS monitor since this is probably the most important service I run on the QNAP.

Thanks for any help or input. *_ _* */Joseph De Nicolo/* /Secure Database Administrator / /Center for Complex Network Research <http://www.barabasilab.com>/ /Northeastern University/

---

Xymon mailing list Xymon at xymon.com http://lists.xymon.com/mailman/listinfo/xymon

-- David Baldwin - Senior Systems Administrator (Datacentres + Networks) Information and Communication Technology Services Australian Sports Commission http://ausport.gov.au Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616 david.baldwin at ausport.gov.au Leverrier Street Bruce ACT 2617

Keep up to date with what's happening in Australian sport visit http://www.ausport.gov.au

This message is intended for the addressee named and may contain confidential and privileged information. If you are not the intended recipient please note that any form of distribution, copying or use of this communication or the information in it is strictly prohibited and may be unlawful. If you receive this message in error, please delete it and notify the sender.